Recently active
In Creo 3.0 and Creo 4.0, when using the Measure tool on the Analysis tab, the pop-up results dialog box remains a fixed font size, and there is no way to affect that font size. This presents a problem when creating screenshots for presentations; often the font is too small, and the user is forced to perform copy/paste/resize tricks in order to get it to look right. Or, a user may have poor eyesight and simply have trouble reading the smaller font. Providing a config.pro option (e.g. "measure_results_font_size" with values "small"*, "medium", "large") that controls this would enable finer control and a streamlined process for presenting results in a screen-captured format.
Maybe its me but I don't believe the persepective view in drawings has ever worked. The command function has been there but the settings don't relate the same as in the model. When you change a view to perspective in drawing thats it you cannot change back or alter the perspective settings you have to delete the view and try again
Wenever a part that contains a BMX feature (say an Optimization feature for example) is opened without a BMX license (say the floating license is tied up by another user), and a change is made to the part, the BMX feature does not recalculate and update as its supposed to, AND there is NO notification in Creo that the feature did not calculate. Nothing in the Notification Center. Nothing in the Message Bar. Nothing! Can a notification at least be created, so in a case where a BMX license is not available to run an existing BMX feature, the user is made aware?
We frequently use Microsoft Surface HUB 84” platforms for discussing CAD Models on meetings. It would be fine if we can install Creo on these platforms. In these cases we can modify a Model together with our partner. These platforms have Universal Windows Platform (UWP) OS.
Currently, Drawing Template Views can use specific simplified Reps. However, any repeat region table placed in the template ONLY use the master rep. If you try creating a drawing with such a template where the view is set to show balloons, an error appears since the table is for the master rep, not the view rep. Please allow the table to be configurable in such a way where it can be linked up to a template view or specific rep. Thank you.
This would be very beneficial while working with combined states on the model, where notes are often created with reference to dimensions.
There is a documented process for driving Windchill Find Numbers from a Creo assembly. The issue is that creating an assembly component parameter for every component in the assembly is time consuming and open to human error. Also because it is a parameter created for each component in the assembly you can enter different integer values for each Find Number even though the CAD part is the same. i.e 4 x M6x25 bolt could have 4 different Find Numbers when you only want one driving the Windchill product structure Fix, Solution 1 - At the assembly level allow the start assembly model to contain the component parameter used to drive the Windchill Find Number just like any other part or assembly parameter and ensure that the integer value entered gets used for every instance on the same part in the assembly Solution 2 - Allow the repeat region report index to be used to drive the Windchill product structure Find Number. Currently if you have an assembly of 10
PTC, Please change Creo Parametric to allow analysis suscessfully run within a design study that has failed to be viewed. This causes alot of wasted time re-running analysis that has successfully completed running within a design study that's not able to be viewed just because the standard design study has errrored out on one of tthe many analysis that have bee run in series. Thanks, Don Anderson
Allow being logged into the PTC Community website for up to 7 days. When the switch to Lithium based PTC Community occured, the ability to be logged into the website for one week was lost. Log in on every Monday. Now logins are occuring multiple times per day with out having closed the website tab.
The idea is simple. We have legacy library models with a status of Obsolete. We don't prevent a user from downloading these models so that old products can be downloaded and ECNed that use these legacy library models. However, some users are still adding these old library models to new products. We would like there to be a way to prevent this. They should be requesting new models made from the librarian.
You cannot tell if a post was updated (in the evening, or the last time you checked) if the time is only reffered to as yesterday. It could have been update at 2:00 pm in the afternoon and already read or it could have been posted at 9:00 pm, after the work day had been completed.
Acutally there is no possibillity to change the standard values in the "Replace" feature. Please add here something
For our Postprocessors its necessary to add a standard comment for each NC sequence. Please add a possibility to do this automatically for all sequences. Alternative, add an automatic PPrint at the end of those comments.
Currently Creo 4.0 M020 you can have multiple windows of the same assembly with different simplified representations in each window, but each window is limited to the same explode state. It would be beneficial to have the ability to show a different explode state for each window.
Hello, When adding geometrical tolerances in a drawing or in a 3d model (MBD), You can face the following situation : - Your geometrical tolerance is composed of multiple lines (in this example 2 at start) : - If you need to add a line between existing lines, Creo will not allow you to do it. It automatically add any new line to the last position. With this behavior you will need to change/correct all lines before the last one... Can you add the possibility to reorder the created lines for geometric tolerances? Thanks in advance
hen we dimension our parts in Drawing mode, we often times have to select two edges or surfaces for placement of dimensions. What we have found is that by selecting one edge first, that edge gets a dimension (although, that is not the length you are looking to dimension), but that text covers the cursor when you try to place select the second edge or surface. When this is a very small feature, this is a bit obtrusive. Is there a way to move that text to the side of the cursor so that the arrow is unobstructed? We have many users organization-wide that complain about this on a daily basis. I mean I understand that users may want to place that text dead center on the length of the dimension, but while the selection is active, can the text shift to the left or right?
When clicking on the Creo Ideas, have the default be "New Ideas" that have been put forth instead of "Hot Ideas".
currently the only way to verify that external field thermal loads imported into simulate are correct is to use the preview function when setting the load. It should be possible to allow a results view that in the structural analysis that shows a fringe plot of temperature. This is possible in the thermal side of simulate and needs to be integrated into the structure side as well.
Every PSF file has a line that hard codes the date code of Creo. If you update Creo, you have to change all the date codes in your PSF files to match or they will crash Creo. Why? Is there something I'm missing as to how this is useful? Remove this dependency so PSF files can be reused between updates!
Currently, to customize Creo, you dump your custom files in several locations throughout the original files structure, probably with a script because you don't want to forget where they all go, and when you update Creo, they all disappear and you have to do it all over again. What you should have is a plug-in directory which would contain any customized files placed in an identical directory structure within each plug-in within the plug-in directory. For example, a custom config.pro would be in Plug-ins\yourpluginnamehere\Common Files\Text\config.pro. It would not be limited. If you included Plug-ins\mynewplugin\Common Files\fakefolder\fakefile.fake, then it would be as if you added fakefolder\fakefile.fake to your Common Files directory. Is this sounding familiar? Then you probably downloaded a mod for a computer game in the last few decades. This is how it's done. Benefits: Customizations would be more easily manage
Provide an option to automatically update Creo without admin rights. It can be done (everything else does it, after all). The primary concern is preserving customizations, which has always been a problem with Creo. Also, psf files would need their awful build number dependence removed. Edited to fix broken link.
When creating a combined view on the model that contains annotations (notes, dimensions, FCF etc) it would be nice to have those annotations automatically show up when using that combined state on the drawing. 1. Create a Combined View on the model containting annotations. 2. Create a view on the drawing and select that the view is the combined state from step 1. 3. All annotations that are displayed in the combined view from step 1 are now shown on the drawing view from step 2.
To improve Creo Illustrate regarding merge 2D illustration capability from IsoDraw should be possible to enhanced the x-section properties in pattern and spacing (or material templates) like within creo parametric or creo/elements direct.
Possibilty to put a background color in a drawing when printing a pdf file. Today, it is the white color.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.