Recently active
Mold manufacturer need to bend solid geometry on a specified surface with draft control. Espacially modifying side walls according to pull direction while bending solid geometry on a specified surface is very important for mold makers to not to waste time for detailed shaped models.In attached video you can see Creo and Siemens NX comparision for this subject and easily notice that in Siemens NX this option is provided in a very easy way.
We could use an unbend feature for pipe similar to unbending sheet metal using a bend table. Also auto generated forming table to place on print to include straight section lengths, bend angles, & rotations.
With configurations, you can have the position of parts in an assembly be different. Position is an 'instance' attribute for the parts in the assembly. It would be nice if other instance information could be altered when a configuration is activated. This would include the part's 'instance' color and transparency. So when a configuration is activated, the parts could move, change color, and become semi-transparent to make it easier to design.
We quite often have to duplicate drawings and keep the dimensions as applied on that sheet. We will save as the drawing, so that the dimensions are there. But the dimension ID's are exactly the same as the original. Because of this the original drawing dimensions will become detached (Pink dims.). If you reattach the dimension on the one drawing the other drawing dimension will become detached. If the save as would repopulate the dimension ID's this would not happen. Besides this happening on component drawings it also happens on Assembly drawings when we need to copy them.
Creating a support as easy as creating a constraint, for example by being able to select a surface or datum plane as 'invisible wall'.+ opposite component can be left out (no need to mesh it and define conditions on it)+ easier/quicker and thus more robust than a ground spring>weighted link>surface region combination
Currently, in order to change the type of a hole in a pattern, the pattern must be deleted, the hole redefined and then the hole re-patterned. When the model gets to the detail stage, if the engineer or designer has used straight holes instead of tapped holes, or vice versa, the detailer has to delete and rework all of the hole patterns, which also causes the axis to be renumbered. This can then lead to downstream feature failures and assembly failures. In all, this lack of functionality can cause many lost days of work.PTC, please allow holes in patterns to be changed to any type of hole without having to delete the pattern or renumber the axes.
Actually the collison checking mode of Creo manufactoring mode works only in the turn plane.Geometry which is placed differently in the room is not detected.In turn mode, however, the complete rotational geometry must used for collision control. Video Link : 6891
Currently, within the Windchill/Modeling integration, there's only the functions sd-uwgm-element-exists and sd-uwgm-element-load.These functions accept only a filename.Because of this, these functions always load the latest version of your model in Modeling, the latest version you have access to more precisely.It could be handy if you could specify an exact model, by having a function that can accept Model Number and Model Revision (and optional Iteration).
If I can use punch and stamp on a face part, I should be able to use section as well.
When moving or modifying a 3D splines, there should be a way to force the command to snap to an interpolation point. Now you can only snap to end points
Creo Parametric has this
Need to exchange with these applications for advanced rendering.
Edit Camera saves view settings, but they are not persistent between sessions. It would be helpful to have a way to have some camera settings saved between sessions so that similar parts can be viewed identically between sessions.
Support T-Spline surfaces and Sub-D surfaces.
Unite Technology: Open Solid Edge functionality availability.Currently Creo > File > Open of a Solid Edge file (*.par or *.psm or *.asm for instance) proposes only "Import" option.The enhancement request is to have OPEN instead the IMPORT option (please refer to the 3rd page Unite Technology document).I'm asking this enhancement because this functionality will leverage us to move to Creo in a more smooth and efficient way.It will allow us to incorporate Solid Edge assemblies directly into Creo design and then convert data as needed and when needed. This is a key functionality to easily re-use the legacy data.Best Regards,Luca TonelliWhirlpool - Indesit
Creo Parametric 3 uses almost a quite white user interface. It is possible to change only colour of background of graphic window but not background of ribbon menu, dialogue windows or menu manager.Will be possible to enable to change colour of background of ribbon menu, dialogue windows or menu manager to get more contrast, synoptic, ergonomic and nicer user's interface ?Using of some darker colour or any optional colour would be good - see image (comparison with Pro/ENGINEER with better colour scheme as example).@
Why cant i select multiple surfaces when adding axis to models, so show centerlines on drawings. a triangle hole cut, with the rounded corners.. i go to add axis, and have to click axis, then click surface, then middle button, then click off the model in space.. then click axis, then surface, then middle button. i should be able to multi select surfaces to add axis on these features.
we need more default color schemes, light, dark, anything.. also.. why on earth.. would you have dark color scheme, and the show dimenion text be red, on top of black.. rediculous..
when parts are in a big assembly, be able to highlight the part in the view while the balloon is being used. some parts are hidden behind other parts, and highlighting it would allow detailer to find where the part is in the model.
With Creo 3.0 and before the form based Windchill authentication window that is shown by Creo has a fixed sized. As the login form may be bigger as this small window, the window size of the form based authentication window should be customizable e.g. by a config.pro option.See also Windchill help:http://www.ptc.com/cs/help/windchill_hc/wc101_hc/index.jspx?id=WCAdvDepAuth_ConfigAltAuth&action=show
This should be a simple improvement to the drawing functionality.It would help to clarify and simplify an assembly drawing.I'm sure PTC will add this feature next week. Thank you.
Hi..As if we insert cgm file or dxf file in drawing then due to duplicate entities or overlapping entities drawing becomes heavy. and which is difficult to work on complete vehicle drawing.So if we remove / delete overlapping entity then drawing will becomes lighter than earlier and will easy to handle it.Currently, we don't have any facility in creo to delete overlapping / duplicate entities as per PTC Tech support.Regards,Prashant Pandarkar
Bonjour,La société ou je suis en poste, travaille énormément avec des Bureaux d'études en architecture.Nos clients nous demandent de plus en plus, de pouvoir intégrer nous pièces et assemblage 3ddans leurs conceptions. Creo génère des formats .prt et .asm, alors que Revit génère des formats.rfa. Actuellemnt Creo ne peut pas exporter ce type de format, je pense que dans avenir proche,il serait judicieux que les logiciel de 3d comme Creo puissent échanger avec des logicielsd'architecture.En attendant que Creo puisse exporter le format .rfa, existe t'il une astuce, ou un convertisseurpour pouvoir exporter les .prt, .asm en .rfa.Merci par avance à toute vos réponses, et surtout à votre compréhension cernant mon problème.Cordialement.
I am posting this request that I would like to be able to change the reference point of placement of a table, when inserting it by "Table From File"When creating a new table by "Insert Table",the reference point of placement is decided according to the direction of table.If inserting it from a *.tbl file, it seems like that the reference point of placement is decided from the setting of original table.However, after changing the direction from Table Properties and saving it as a new *.tbl file, the reference point is not able to follow the changing of direction.Therefore, I have to create a new table with desired direction again.Please check the attached file, which direction is "Rightward and Descending", and I want to place it from the point at the right and upper side.
Everytime you add a general view in a drw you obtain by default all the reference planes, surface finish and geometric tolerances of the asm.This is annoying: you have to remove them all from the drawing (it takes time when they are thousands...) and then you'll keep probably none.The workaround is to create a layer to hide, but then you loose the "show/erase" functionality.Please add a config option where you can change this behaviour.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.