Recently active
Currently, in the Creo NC/ manufacturing, the simulation tool paths are all shown in green. However “Plunge”/ “approach” and “retract” movement are very critical trajectories in the machining and cutting tools are very easy to be collided with workpiece during those sequences. In order to distinguish the difference, I suggest that “Plunge/ approach” and “retract” should be made in different colors for easier distinguishing when checking the tool path.
Quick access to drawing (.drw) that has the same name as the part / assembly.Quick access to new drawing (.drw) with the same name as the part / assembly.I tried to do with mapkeys and is not possible.There are scripts in WWW, but should provide it PTC
Hello, Mrs of PTCI would be well that the products of PTC (On web) were more specific and separate.Example: PTC Creo Simulate (Simulate and Advanced Simulation Extension) with Structural and Thermal.There should be a document for Simulate Structural and other for Simulate ThermalSome customers doesn't find information about ... for example Thermal.... is more specific about StructuralThanks,I Hope it can be possible.BR,Gorka GarcíaIntegral PLM Experts (Integral Innovations Experts)
It would be nice if, in the context of a simple part, you could be able to create a multibody modeling based on quilts (the same way as CREO manages mold volumes within a manufactoring assembly file). This would give greater freedom to use the top down design in a very simple and effective way within skeletons models (for example in the management of complex welded structures).
Wenn ein Machining Element erstellt wird, kann der Ebenen-Copilot über die rechte Maustaste auf eine andere Ebenen-Copilot Einstellung geändert werden. Sobald die Position definiert ist und man auf "Weiter" klickt, springt die Einstellung wieder auf die Standard Ebenen-Copilot zurück. Es sollte eine Möglichkeit bestehen, dass man während des Machining Prozesses eine permanente/haltende Ebenen-Copilot Einstellung definiert, welche nach Abschluß wieder auf den Standard zurückgestellt wird.
Currently when an Appearance is applied to a solid model, only existing geometry is referenced. This means that of the model changes to create new surfaces, the Appearance will not apply to them. One example this is critical for is color variants in a Family Table, and as a result, if changes are made, they could require each color variant to be manually modified. If Appearances catered for geometric changes that create new surfaces, these extra manual steps would not be required.
We analized a same plastic injection using the same information material and injection properties in many software. Also we did the same analysis on Plastic Advisor Creo 2.0 and every tests results was satisfactory and consistent with the real injection of the product.Just in Mold Analisys (Moldex 3D) of Creo 3.0 the result is not correct, is unreliable and is different from the real result.The customer is it very dissatisfied with the Mold Analisys module, since he purchased the module but it is not presenting the promised benefits. He's wanting their money back.Other customers may have the same problem and we request from PTC an effectively solution ASAP.
This tool can be very useful while designing parts and want this curve to be part of the design model. For those not familiar with this feature: The Turn Profile feature creates a curve that represents the maximum for outside and minimum for inside boundary if your part is revolved about Z axis of a coordinate system.
Currently Creo Parametric 2.0, 3.0 do not handle high dpi displays well. These will only become more prevalent going forward and a decent solution is needed. Maybe a config.pro could be added to control text size in the browser?
In general, we do not want to print datum feature from the drawing, except displayed annotation axis. We would like to have confing option that never print datum feature even turn on the display on the Graphic Tool Bar. This can be saved the miss print.
We would like to have same View name function of Auxiliary View for Projection View.
There are 2 axis in the drawing which are displayed by model annotation. One is parallel to the screen and another is normal direction with respect to the screen.When user select the parallel axis as Sketch's Snapping Reference, it is fully highlighted but can not add to the reference. The other hand, when user select the normal axis, it is partially highlighted and possible to add to the reference. This make us confuse. Parallel axis should not highlight and normal axis should fully highlighted.
With the shade display mode, we can not see the Cosmetic Thread even if the shape extend outside of solid. This happen we create Chanfer after create Cosmetic Thread. At this case, we want to recognized this need to be fixed.
When inputting text into a table cell there is always a space which means the text is not in the center of cell.
Most case we want to measure the rough distance between the point of mouse pick, without create Datum point on the edges and/or surfaces. Currently Creo always measure the minimum distance between the entity. Solid Edge can be measure the distance of the point even there are no edges and surfaces.
I want to assemble the brown part like right side picture with Tangent constraint. Currently, we need to create additional datum plane.
It should not be created if it is not support.
Currently leader of Note can be Edit Attachment to anywhere. In our parts, there are many size of Pattern hole and we sometime need to Edit Attachment of the Hole Note. At the time, we want to select the edge only from same size of hole for avoid the miss selection.
it would be nice if the user could use the reference pattern functionality in Simulate in the same way he/she does in Creo Parametric. For example it might be useful to quickly create FEM elements such as screws, bolts or even surface regions. The only workaround I know is to use mapkey.
User should be able to switch the display between the objects that are NOT contained in the layer "Hidden Items" and see all that are in this layer. This function also exists in other CAD (eg in Catia is called "Show/No Show). This feature could be very useful to quickly locate and select the objects that are in the layer "Hidden Items".
In Creo Parametric 2 or 3 in drawing module user can't change a scale of an "additional view" - it have the same scale that general scale of the sheet. Why it's not possible to change? Every time all of users need it, but only one way it's trick to make general view and make a fake arrow Please fix it.
When creating a detailed view sometimes the show boundary feature does not work correctly. It sometimes displays the boundary around the entire spline defined boundary instead of just the edges of the model. I submitted a case to PTC but was informed that this is a limitation in the software and that I would best be served to post here in hope that PTC will address this in a future release.The green lines indicate where the boundary should be displayed.The red line indicates where there should be no boundary lines.
Momentan kann man die Einstellungen für den Ebenen Copiloten(UV/3D/verdeckt) nur permanent überDatei-> Vorgaben-> Machining -> Setzen der Standardwert in den …… -> Ebenen Copilot einstellen.Diese Einstellung kann man nicht ändern während ein Machining Befehl offen ist.
Wenn man Teile/Baugruppen kopiert bzw. Exemplare erstellt, so kann man nur für die Positionierungsoptionen "Auf/Ausricht" oder "2 Punkte" die Option "Mehrfach-Positionieren" verwenden. Diese Option "Mehrfach-Positionieren" sollte auch für alle anderen Positionierungsoptionen möglich sein.
Is there any way of making this relation work?SMT_DFLT_BEND_RADIUS = SMT_THICKNESS * 1.5If not, does anyone know why?Why would a SMT_THICKNESS * 1.5 relation not be functional when SMT_THICKNESS, SMT_THICKNESS * 2, and SMT_THICKNESS * .5 all work?Again, if not, PTC needs to fix this so that these relations can work. It would be much appreciated!Thanks!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.