Recently active
It is possible when copying sketch geometry maintain the layer of selected geometry?
Sometimes I lose track of how big or small the object I am working on actually is...I wondered if it might be possible to have an onscreen scale indicator (perhaps parameter driven) along the bottom or side of the graphics window that could give an idea of size at a glance. It would obviously need to change depending on the zoom level, and be dependent on the units for the part. Being able to turn it on and off at will would be nice too.Just curious if this is possible.
While in Creo 2 or Creo 3 it"s not possible to un-delete/restore a mechanism analysis that was deleted while using the right click menu.You have to re-open a saved copy of the assembly. Having the edit definition command next to the delete command in the right click menu posses a chance of the analysis being deleted by accident. Please make un-delete available for all commands using ctrl-z or the back arrow or a right click command.
I would like to implement a function when creating custom symbols, that allows the user to make some geometries variable.For instance a rectangle can have variable length on the height and the width. In this case it shall be possible to enter value for length and widht when placing the symbol.
Ref-dims have the brackets in the prefix and suffix. It would be better to have the brackets in the text-editor. Thus the prefix and suffix could be driven by mapkeys, e.g. set an "M" as prefix or remove it from the prefix would not Need to distinguish between dims and ref-dims.Referenzmaße haben Klammern im Präfix und Suffix. Es wäre besser, wenn die Klammern im Bemaßungstext erscheinen würden. Dann könnte der Präfix und Suffix besser mit Mapkeys gesteuert werden. Z.B. könnte mit einem Mapkey das Prefix "M" gesetzt werden, ohne dass unterschieden werden muss, ob es sich um ein Referenzmaß oder ein "normales" Maß handelt.
With increasing use of 3D annotations encounter limitation:When you save an assembly or part in 3D PDF with 3D annotations aren't available the different combined states. You can display all 3D notes but can't activate the different states independently.
Hello,When creating large assemblies, it is convenient to group items within the model tree as the assembly becomes more complex. May I suggest allowing a user to select groups when creating simplified reps in order to include or exclude those groups with one click. Same idea applies to patterns (hardware patterns for example).Currently, the user has to manually explode the group or pattern to select items within. This can be very cumbersome and time consuming. Thank you.
Hello... The "Delete" command does not appear in the tree submenu functions in many modules "PTC Creo Parametric". For example in Creo Simulate ... when you want to perform and exploit different simulations ..., functions as "volume region" is not possible to "Suppress" it and retrieve it later .... you can delete only. It would be possible to integrate this command on all modules PTC Creo or at least, in all modules used more as PTC Creo Simulate
The highest video resolution you can currently output from Creo 3.0 Simulation is 720x480. This seemed appropriate 10 years ago, however for a really professional presentation I would like to have options to output full High Definition 1920x1080, or 1920x1200, and other more standard choices 1024x768 etc. This may apply to other video output as well such as animations/exploded views etc.
The volume milling changes in Creo3 include a change in the way regions are manually ordered. The new list with the arrows is significantly slower and more cumbersome than the previous method of simply graphically selecting the regions in the order you want them cut. The time difference for large groups of regions is astronomical and to break these groups into small sets only increases time creating multiple sequences. Please consider including this previous functionality.
The way I communicate the simulation results is most often to make a screen clipping and paste into a PowerPoint or email. Starting with 3.0 the results viewer is more difficult to capture a clean image out of. The small on screen menu is distracting and clutters the image. The same for the "quantity & component" that are now in shaded boxes. Also when doing screen captures it is difficult to always get the same size, area and not get the framing. Autodesk MoldFlow Advisor has a very nice "copy to clipboard" button. This captures the active window and puts a nice clean image out, so that if you paste 20 images into a report they are all the same size and shape - Much more professional looking results. I would like to request a "copy to clipboard" button. Additionally it might be nice to have a "copy to clipboard or save image as fixed size" button where you always get the image on screen at the preconfigured ~1200x800 pixels [you configure siz
I want to fill [Slot single] and [Slot double] at the same time for one of the slot shape.
Dear Creo Team, there are several fonts in Creo that are meant to support some specific languages characters set for example when using Russian, Chinese or Japanese characters. That's great that you already accounted for the users outside of the US. But the world became bigger nowadays. And in parallel, we often deal with Greek letters in the names of our parts. Looking a consumer devices, even iPhone now supports Unicode 8.0 which allows you to read Russian characters while typing Japanese ones and include a physics question with greek letters, without any problem. So please standardize on Unicode in the next version of Creo. This would solve all those language specific workarounds because this can all be adapted to standard Unicode. Yes, Unicode is a real Standard! By settling on this standard, the need for proprietary dealing with different languages vanishes.
Hello,it would be nice if there is a snap command when I move lines or dimensions.That could be a square like in other CAD-programs.This would be helpful to find the exactly point where the lines or dimensions should be positioned.Greetings from GermanyJohannes
HI all I'm Gorka Garcia, Technical Manager of simulation in Integral PLM Experts. The last Sumulation for costumers are wrong o the costumers aren't happy with the results. There might be more cause to part of the pre-loads ... but... if we begin somewhat. Will be better can to make Simulations with Pre-loads (or Other Idealizations) and large Deformations For enhance and draw near to real results. Thanks for all ... And I hope that this idea is in operation for "Creo 3.0" or Creo 4.0" Gorka Garcia
cannot get from 'modeling' to csg (combinatorial solid geometry or other variations, half space Booleans ...) primitives; don't want table legs ... or 'like' ...DON'T WANT TO PUBLISH JUST WANT INFORMATION
When placing an axis, it is not possible to reference another axis. While this is possible when placing a hole feature, which is very similar
Creo Parametric There is no exact location at the moment when you import an image. Maybe the center of the image can be constrained to a datum point, that's all.
If i make drawing with family tables i must to add all of members of this table in drawing, and here is one disadvantage - i can't add all of family members by one click at the same time. I can't do it. I only need one button "add all instances". If you have a lot of instances (>50) your work become a torture.
If i already have family table in a part why i can't use this table in a drawing, just copy this table from model an put it on field of drawing and just hide columns and rows those that you don't need and add new - naming of columns and raws, for example (just tune it for your drawing). And of course this table has to be associative..Let's make software easy for users together.
user can set different font for text portions in notesuser can't set different font for text portions in dimensionsReference thread:Insert Alt 30? (Filled Triangle)
For current functionality, user cannot modify text size of Superscript and Subscript or dimension tolerance using @+<upper tolerance value>@#@-<lower tolerance value>@# independently. Please add a detail option to control the text size of Superscript and Subscript
All,Asking community to vote on an existing SPR that has been sitting around since 2013.SPR Details - 2863114 / 2180319 https://support.ptc.com/appserver/cs/view/spr.jsp?n=2863114DescriptionWhen save_objects is set to changed, Selecting Review > Update Draft in an empty drawing file allows save ....Drawing behavior with the configuration setting save_objects=changed should behave the same way it does in a model. An unchanged drawing should not regen and mark the drawing as modified ("+" sign). Issue is amplified when working with lifecycle states in Windchill.
To whom it may concern:I am writing this e-mail to advise you to convert analsis result to surface.Superpar is a suppler of the car manufacturer that generally deals with casting parts that many of them have complicated design. So, in order to be sure of the parting line for mold we often use draft anaysis. As you know, we can seperate positive or negative draft side under options -> model display in draft alaysis. As you see in the picture below, i only selected positive draft (example) which is shown like surface. While i triying to design parts of the mold, i always need such a surface. But, when i try to save as like a seperated surface, the Creo does not allow me.My suggestion is allowing to create a surface of draft analsis results would be very useful for us and like us other mold designers. Best Regards,Mujdat ISIKSenior Design Engineer & Project LeaderSUPERPAR OTOMOTIV SAN TIC A.S.Izmir-TURKEY
Actually, there is no possibility to redefine an “automatic Workpiece” in the manufacturing mode. Additionally, round workpieces become to rectangular work pieces when you try to redefine theme. So in my opinion there is a need for a functionality to redefine those Features. I refer to case 12804126. Video Link : 6494
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.