Recently active
We have large assemblies and or large step files that can take several minutes to open. It would be nice to have a progress bar.
Currently the only way to get a view on a non-standard angle and rotated with view arrows is to create a cross section and use a general view or fake in the arrows.An Auxiliary view can get a view at an angle, and add view arrows, but the object cannot be rotated. A projection view can create a perpendicular view can also create these view arrows without the need for a section view.Revolved can perform some of the functionality, but it is essentially the same as the cross section method. The example this came up on was a container with angled sides. The features on these angled sides were perpendicular to the angled face so a projection view would not work well. An auxiliary view works but then the box is tilted. It's also helpful when the object you're detailing has clear orientation such as walkways/stairs/etc. This is in line with ASME Y14.3. This doesn't appear to be in Creo 3 either.
The Show Model Annotations should include a filter for better selections.For example, if you want to show axis of a subpart inside an assembly drawing, you would need to click on the part in order to show up, instead of clicking the view. The view only shows the top-level datums, dimensions, etc. There is an option that specifies top-level or all. However, I think it should be more intuitive to users what they are selecting and what they want to show. For instance, controlling layers can be done by drawing, view, model, etc; where there is a drop-down. Here there is no drop-down. The only selection process that I am aware of is toggling through the mouse selection and clicking models/features in the model tree.
Avoir la possibilité de remplacer un composant flexible dans un assemblage sans avoir à supprimer la flexibilité auparavant.
On a fill pattern the spacing between pattern member centers applies in all directions. On some types of grids it would be interesting to have some more spacing options, for example X and Y spacing on a square grid.
Our company often creates very detailed drawings (with many dimensions, etc.) of plastic injection molded parts. Later, we may determine that one of these parts requires (threaded or other) metal inserts that will be overmolded with the plastic. In this case, we then make a CREO assembly of the plastic and metal inserts. Note that in real life these parts are not literally assembled. We then want a drawing of this new CREO assembly to have all the details (all the dimensions, etc.) that were originally shown in the part drawing. We no longer need a CREO part drawing of just the plastic part because this plastic part will never exist in reality (without also having the metal inserts). So, it'd be great if, in the original Part Drawing, we could multi-select dimensions then cut-and-paste them into an Assembly Drawing, eventually selecting a specific view, as long as the related assembly contained the same part.
Hi,I want to exclude components in simp. representation based on their storage folders in Windchill ==> I decide to create a simplified representation based on rules When creating the simplified rep. based on rules in Creo Parametric, for exemple a rule that exclude component based on the parameter PTC_WM_LOCATION( attribute=> Expression => string => PTC_WM_LOCATION => égal) ==> the expression value field is limited to 32 caracters ! This is very annoying, as this parameter gives the location of the subfolder in a Windchill Context, i want to take just a portion of the entier expression, when selecting the value of the expression from the drop down menu, it allows the expression to be very long, when typing Anything manually it takes you back to the 32 caracters limitation.I think this limitation is not logical and should be removed.Thanks in advance.
When plotting Simulate results in a graph form (such as from a sensitivity study), any re-plotting of the graphs causes format changes to be lost - including such basic things as adjusting the axis limits.Editing the window properties for that graph or even adding a new window both reset the graph to default; and format changes are not kept when saving the results windows (.rwd).Fringe plots have been improved so that the legend is not always reset; now can we have similar improvements in graphs, please?
According to SPR 1956247 and behavior that we've seen, datum axis display can no longer be shown in a drawing in Creo 3. According to support, this was causing performance and visibility issues with many customers. They recommend to just use SHOW MODEL ANNOTATIONS.My product improvement idea is to at least make this a little more consistent:In the View Ribbon, they should remove the axis display button and axis tag display buttonIn the Display bar, they should remove the axis button display and from the All datums display button.
I have a case I want without the display of the "Locally Modified". Please look at the file.
Harness parts are difficult to identify just by seeing its number/name, unless we try to open it in creo.Create a different extension or sub-category, which will make sure that its a harness part, before we try to open it in creo.
We would like to be able to output the results of a ‘recorder’ file (in CED Modeling) as a generic viewable (i.e AVI, mp4 etc…) - similar to some form of screen capture function,
Often I create workspaces with similar names. It would be nice if there was a created on column in the dialog box to help you figure out which one is the most recent if you have been away from them for a while.
I appreciate that this request falls in the Parametric/Family table 'use model', however, as a 'Product Idea' i thought I would raise it, as it maybe perceived at PTC as feasible/possible. We would like a physical relationship between a Stock part (i.e a casting) and a finished part (i.e. machined casting), so if a Cast is modified, the related finished parts, could be automatically amended as well (i.e. a logo change embedded into the cast) I am aware of the Stock/Finish relation function, but would like to request that this functionality be extended to the physical shape also.
It would be nice if the system would automatically assign the proper material crosshatch as defined by ASME to the model when the material is assigned. When a cross section is then applied to the model, the proper section lining will be automatically applied. The section lining could be an added line to the material file that Creo would read.
Many of our users keep on forgetting to change the Search in: field from All Products to All Libraries or All Products & Libraries when trying to search for library parts. It would be great it there was a setting we can control that would default the field to All Products & Libraries. Thanks!
Make deletable the scale note from a detail view in Creo Parametric drawings
Prior to WF3? you didn't have to explicitly right click and choose save after defining an explode state. Now after defining / editing an explode state, there is a + sign that appears. You have to remember to right click and choose save for the explode state to show up in a drawing. I think the change was made because of the introduction of combined states.I would suggest this be a config option.
When creating a odinate dimension and set the display to Basic. The box around the dimension is overlapping the dimension line.When a Basic dispay is used the dimension should move up so it is free of the line.
I would like to propose the idea that when you double click on an item in the Model Tree in Creo Parametric it will zoom to that feature or component. Currently, in an assembly if you double click on a sub-assembly or part it will expand to show components or features (if being shown). If you click twice on a feature (not quickly) to get to rename the feature, but if done quickly it will do nothing. In Creo View, the behavior is to zoom to the component when you double click, which the users here really like. Since these two pieces of software are in the same family (by name), I would like to see some of the basic features be the same. I understand that these two pieces of software serve different functions, but all the users see is inconsistency. They do not care about being two different platforms for different purposes.
Need the ability to reorder a component's position in the model tree while in insert mode to a location in between suppressed components of to the end of the model tree.With the example below I would have to cancel out of insert mode then drag the highlighted component to the end of the model tree and then go back into insert mode.(Note: it would be ok if when the component is reordered if it is suppressed temporary by the insert mode)
Re-architect Creo WGM CAD Document based on soft-type/sub-type rather than attribute called document type or document sub-type. This shall allow to tightly integrate OOTB functionalities such as ACL, Policies, OIR, Numbering Scheme, Lifecycle/Workflows with object type. This shall provide more generic solution.Use case:Currently Creo Formats, Assembly, Part etc. are persisted as EPMDocument type with authoring app as Creo/Pro. Attribute called "document type" differentiates between each of the formats. So, all Creo Formats/Assebly/Part are driven by same Lifecycle/OIR and ACL etc. Usually Formats are managed under Library where they're rarely changed. So if we want to put in policy not to be able to create/check-in Formats in a Product level, that's not possible using ACL/Policy (without customization).Making WGM CAD Type as sub-type of EPMDocument shall allow to apply various business rules/policies more flexibly without customization.
I would like to have functionality at the same efficiency restored in the Creo UI to control system colors. This is the WF5 drop down and the initial selection has been removed in the Creo UI. You now have to explicity provide a path to a syscolor file and read it in to set up the system colors which takes much longer than a pick in the drop down menu. A mapkey is a workaround but mapkeys are not supported in new releases as the UI can change and they must be rewritten. I would like to get the scheme pick menu functions put back in the UI.
If you load a pkt or pk2 you have the possibility to select the desired position of the part in the Model.Simply check/uncheck "Position after Load".When "importing 2D to work plan" that is not (yet ) possible.The Geometry is loaded allways with her 0,0 point to the 0,0 point of the workplane.It would be handy if you load for exemple your 2D geometry tools from your personal database and they could be positioned directly to the desired location. Like it is possible in Drafting. There the Default is to select a position for the loaded Geometry or you load with the supplementary option Absolute then 0,0 goes to 0,0
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.