Recently active
Current state: In the drawing view, if the view display is set as shading, then the offset lines are not removed from display, if the line passes through the model. Request:Offset lines should be removed from dispaly for shading view as it currently works for display set as hidden.
Currently there is no way to know what simplified reps, explode states, etc. are used in a drawing.The user has to pick each view individually and look at the properties to see which states are used.Please add a function to list models and states used in a drawing.
A checksum or hash sum is a small-size datum from a block of digital data for the purpose of detecting errors which may have been introduced during its transmission or storage.
Some 5 axis roughining strategies should be introduced in the manufacturing suit. At the movent there are no direct and simple way of configuring 5 axis roughing tool paths. Other CAM software are getting their grip on such strategies. I think this gap should be addressed ASAP.
While creating Revolved Cut or Extrusion using sketched section. Feature is "full" when it cuts or extrudes 360°. This 360 ° dimension is rarely used in the drawing.or annotated 3D-model. However it has an general tolerance.Problem occurs when wanted to "display" 3D-model with Least Material Condition (LMC) by using #DIM BOUND functionality. When LMC (Lower) values of features are applied the revolved feature is no longer "full" but it leavesan small wall/gap, defined by general tolerance. Gap / wall then potentially causes following feature(s) to fail. My proposal is: If we could have an Revolved Cut or Extrusion with an Tick box specifying: if the feature is Full. No tolerance applied to full / 360°. 360° dimension could be blanked (removed) as well, as it is not really needed.Instead of Tick Box, config.pro option could be used for providing same functionality. There are alternative ways of 3D modeling but I do not see them as workaround f
Currently you can create a new simp rep using selections in a master rep. Would like similar ability but from an existing simp rep.his can be a considerable time savings when needing multiple representations.
When you do a cross section of an exploded view it takes the cross-section first, then performs the exploded state. Normally you might not need this, but if you have mechanism items shown in multiple positions you can use snapshots to help create drawing views in each position. It works in the model as expected, but in the drawing it will hide any components cut by the cross section before moving them into place.In short, the drawing should match the model. The model should match the drawing. Exists as an enhancement SPR 2105078
Creo Elements/Direct Modeling and ModelManager DB-STATUS is that it shows whether or not the edited after reading from DB, hard to understand from the title and value. I want to change the representation of the title and value.
Please add the ability to select multiple features in the drawing model tree and then show their dimensions for a view you then select.This currently does not exist in Creo 2 or Creo 3 Parametric.
Functions likeTR_CHANGE_WIDTHTR_CHANGE_CASE_CONVTR_CHANGE_LINESTR_CHANGE_WORD_WRAPTR_CHANGE_PRECISIONare currently unavailable through the Annotation interface. If you want to update your drawing frame, you need to save the frame to .mi, load the frame in Drafting, make your updates, save to .mi, load frame back into Annotator, and check the new frame in.
The system should show a warning if user updates drawing in Annotation and the corresponding model in Modeling is loaded not full from ModelManager(e.g only structure has been loaded)
Please add back the ability to double click edit a dimension or it's tolerance while in drawing model using Creo Parametric 3.Currently in Creo 2 you can double click on a dimension (parametrically driven) and edit the value of the dimension.Using Creo Parameteric 2 you have to use 4 mouse clicks to edit the tolerance value.Using Creo 3 you have to use 4 mouse picks to edit the dimension value or the dimension tolerance value.Please change it so when you double click on the dimension main value or the tolerance value you can enter a new value for the value you double clicked on.Creo Parametric 2 ( 2 clicks )Creo Parametric 3 ( 4 clicks )Note: this ideas has been marked as duplicate, please see Edit the tolerance of a dimension in drawing by using double click
Untill version 17 you could take the projected center of a circle, line,... on a workplane without going back to the workplane again.In version 18 you could solve this with the classic commands, but in version 19 that is also gone.Now you can get the "blue" projection lines with shift, but then you need to select the center on the workplane itself.It was much easier to do that with the old versions.Can this come back and why is this not possible anymore?thanks
Currently not able to copy points (multiple points in one feature) that are set as datum targets from one model to another and maintain the same naming scheme in target model copying to.You are unable to show the set datum target or create a new one without getting the error message "Point has been set, try again."For instance say you want to transfer the points from the machine model to the casting model or the other way around.The points do copy over but lose their original names and do not display as set datum targets in the destination model.or make it so set datum target points may be used in higher level models.
Is there a Creo Elements/Direct Interface for Unigraphics NX Plugin for NX 9.0 and 10.0?The plugin 8.5 does not work with NX9.0PTC is lagging behind with this translator.Current NX version is 10.0.
In the Module Notebook in Creo 2.0 (formerly called Layout), it is only possible with workflows (eg Mapkeys) to regenerate relations. I want to have the same function as in all other modules and to be able to regenerate the relationship with an icon. Also a shortcut key such as <Ctrl> <g> would be helpful.
Taper features can be very useful, but are a bit difficult to create and use. A few improvements could help.First, the text in the Taper dialog should say "Keep as Feature" instead of just "Keep as Feat"-there is plenty of room.Second, it should be possible to modify a taper feature by right-clicking on it in the Structure Browser, or by pre-selecting a face in the taper feature and having modify and remove options on a mini-toolbar (similar to what can be done with faceset features).There should be two "remove taper feature" options: one to remove the feature definition (and keep the geometry), the other to untaper the faces and then remove the feature definition (similar to custom features).And, in addition to being to modify or remove a taper feature, there should be a command to "suppress" the taper (which you can do now by unchecking the box in front of the draft angle).
Would like to extend the 'Outline' View calculation option to be able to be part specific. i.e. make this view Outline only except this part. Similar to Secure parts or Managed views.
3MF | 3MF Specification3MF is a new 3D printing format that will allow design applications to send full-fidelity 3D models to a mix of other applications, platforms, services and printers.3MF is an XML-based data format – human-readable compressed XML — that includes definitions for data related to 3D manufacturing, including third-party extensibility for custom data.The code to read or write 3MF is available as open source: Microsoft’s donated code reads STL/OBJ/3MF, writes 3MF, and can use Web Services for model repair.The 3MF format is designed to be an additive manufacturing format, with the complete model information contained within a single archive: mesh, textures, materials, colors and print ticket. 3MF provides a clear definition of manifoldness — open source code available for rapid validation and there is no ambiguity for models with self-intersections.
You used to be able to right click and choose "pause" during show and erase which would allow you to pull dimensions or annotations out of the way so you could pick the ones you wanted. According to PTC Case # 12538105:"I have just received confirmation from Product Management that the new Show Model Annotations functionality does not have a Pause capability. It was not forgotten, it was removed."This functionality also used to allow you to use the search tool to find a specific dimension if you knew the variable name (ie d123).
Currently, Manage Parts only allows you to choose what parts are visible in an assembly. This would also be very useful to apply to parts in the situation where you’ve got a part that you want modeled in the as-used state, but need to document the as-manufactured state. For example a piece of tape that is die cut, but drapes over the top of another part. The model that is in the main assy would be the tape in the shape of the parts underneath, under that model would be a container, in the container would be the as-manufactured model that is used in the drawing. Sample structure: MainAssy - TapeInPlace - MfgContainer - TapeAsManufactured - ViewSet
Soft/flexable parts, such as fabric covers, can take on different shapes when assembled. Currently, to display a simplified rep in an assembly, every layer of the model with the simplified part in it needs to have a simplified rep because the master rep always displays the master rep of all parts and assemblies in it.Allowing the simplified rep to be set for the master rep when assembling parts into a model would allow the same model to be used for all variations of the final form.
Actually ther are many empty layer into the view off all komponent layers of bigger assemblies.The layer idea only effecivly used for work when there ar only layers are stored in the models that have any object reference realy. Only "standard layer" "hidden items" can not be deleted.
In Windchill PDMLink 10.1 M040, Units of measure changes in an Assembly with a Bulk Item component created in Creo 2 M100 from gallon to cubic meters, this is affecting us big time. Logged call with TS C12540519 where in they communicated that a SPR is already been logged but PTC has no intention to fix even in 10.2, they asked me to log a call in Create Product Idea.@@
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.