Skip to main content
May 17, 2012 3:38 PM UTC
Acknowledged

Add thread depth and or drill depth to .hol hole files

Related products:Creo Parametric

A lot of people use Helicoils or other inserts which have fixed thread depths

30 replies

Nov 1, 2022 1:47 PM UTC

Since the hole files are only read when a new hole is created, the added columns do not need to be optional. 

Maybe make the default tap drill depth 3X the diameter and the thread depth 2X the diameter as the default values. These values should be in the units of the hole file, not a factor of the diameter. Each company can then edit the hole file for their 'normal' usage of any tap/drill size.

Nov 1, 2022 2:08 PM UTC

We base the tap drill depth off the thread pitch to minimize excess tap drill depth.  For example:  Drill Depth = Thread Depth + (Thread_Pitch * 5)

We also want any ratios applied to be driven of the basic diameter, not the tap drill diameter.  Thread Depth = 2.5 X Basic Diameter

Instead of trying to find a new standard (that probably no one will agree on), the .hol file should simply allow companies to enter their own values for each row for thread depth and tap drill depth.

Nov 1, 2022 3:46 PM UTC

Using a coded ratio to "set" the hole depth very much pigeonholes you into a corner. It assumes that you will always have a hole that is "X" deep in relation to its "Diameter". Like at your company Tom, we have custom holes that we need to produce nearly as often as we do "normal" holes. For example, we use a lot of "centering sleeves" which do not have a set height to diameter ratio. We have to manually adjust all of our sleeve receiving holes to meet the proper depth. 

Being able to dictate the drilled depth of the hole, via a tabulated value in the .hol file would greatly reduce errors, and time spent manually adjusting hole depths to match a specified application. 
We had been using UDF's to install these features, instead of the hole tables, but we found hole tables to be more stable between Creo versions. (Several of our UDF's broke when we updated from C4 to C7, and broke again when we tested on C8 & C9)

Custom columns can be added to the .hol files, they just need to be at the end (far right/east side) of the .hol table. These columns are not able to be read by the hole tool to configure a hole, but you are able to use these columns in your notes. 
We use custom columns to add information to the callout based on the hole we installed.

RT_9180116_0-1667311743759.png




 .hol files are read only, however you are able to adjust the hole shape/size, as well as the diameter if you set the "hole_diameter_override" option to "yes" in your config

Mar 5, 2024 8:00 PM UTC

Voted.  Just now discovering the shortcomings of the .hol file.  I'm trying to build one for NASM33537, and finding that it's completely inadequate.  The spec has defined values for drill depth and thread depth, neither of which I can define in the .hol file.  Asking the user to look up in the spec and adjust each value negates the whole point of having the .hol file.

Nov 21, 2024 9:54 PM UTC

Stumbled on to this thread.  I have been a PTC user since 1996.  For all these years I have not been able to come up with a resolution for this issue.  My company has standards for tap drill and thread depths.  Manually changing the depths is annoying, time consuming and introduces the possibility for error for all of my companies' users.   Adding TREAD_DEPTH and TAP_DRILL_DEPTH columns in the .hole file would be the way to go.   I wish PTC would resolve this - it is not rocket science guys.

May 9, 2025 4:53 PM UTC

Voted. PTC please add this basic functionality. We migrated from Solidworks due to large assy performance, but we get some friction from some users for simple issues like this that come as standard in Solidworks

Jan 6, 2026 2:27 PM UTC

Voted! We would like to control the DRILL_DEPTH and THREAD_DEPTH so we can pre-select holes for 1D, 1.5D or 2D helicoils.

It is very annoying that this is not possible now.

Jan 6, 2026 6:14 PM UTC

Fully agree to be able to control the DRILL_DEPTH and THREAD_DEPTH

Jan 8, 2026 9:40 AM UTC

Yes, would be very usefull!

Jan 8, 2026 11:23 AM UTC

Would be great add-on.