Skip to main content
May 17, 2012 3:38 PM UTC
Acknowledged

Add thread depth and or drill depth to .hol hole files

Related products:Creo Parametric

A lot of people use Helicoils or other inserts which have fixed thread depths

30 replies

Jul 19, 2013 5:05 PM UTC

I agree.  My commpany has standard drill and tap depths.  The designers do not want to use the hole command because they have to adjust the thread and tap depth everytime.

May 21, 2015 1:58 PM UTC

My company is in the same situation with drill and tap depths that have to be adjusted every time.  This populates errors.  The depth ratio used by PTC is not practical.

May 21, 2015 2:40 PM UTC

You can edit the *.hol files to match your company standards. That is what we did at a prior company.

We took the machine shop list of tap drill sizes and modified the *.hol files so they called out what the shop wanted for a tap drill.

You can also create a custom hole file for things like heli-coil inserts, pipe taps, etc.

Chris3Author
May 21, 2015 2:43 PM UTC

Yeah, we have done that as well, but hole depth and thread depth are not options in the .hol files. PTC uses an equation to determine what the values are.

May 21, 2015 2:44 PM UTC

Christopher is correct, since PTC calculates the drill depth (3 x drill dia) it will not match our company stds and the tap depth calculates out incorrectly as well.

Jun 14, 2018 6:43 PM UTC
Status changed to: Acknowledged
Apr 5, 2019 8:06 AM UTC

We have internal standards for thread drill depth and it would be great to have these values available on the hole table file. Today it is a percentage of the thread diameter which for any design engineer does not make any sense at all. Everyone has to edit this value.. We would like to have predefined drill depth and thread lengths.

 

Apr 5, 2019 1:26 PM UTC

The problem is what your company wants as a standard may be different from what we want as a standard.

These files are editable, so edit yours to your standards.

There is a config.pro setting to point to hole table files, so I moved the PTC files to my directory and now when I install a new version of Creo, I still get my hole files, not the PTC ones which may or may not have changed.

 

Sep 30, 2021 12:13 PM UTC

It will be very useful, to configure the "thread depth" and or "drill depth" in a .hol - File.
We need it in our company with 1000 users.

Oct 31, 2022 7:29 PM UTC

having the ability to specify hole depth per fastener line, would be greatly beneficial in allowing the use of the hole tables to drive custom holes for custom fasteners and location components. 

any word/info on this topic from PTC?

 

Nov 1, 2022 12:46 PM UTC

It is super annoying that every user has to manually modify every single threaded fastener they create just to get the thread depth and (blind) hole depth to match our internal company standards.  Please add two more columns.  Make them optional if necessary for backwards compatibility.

 

TomU_0-1667306681367.png