Topics around BOM and BOM Editor.
Recently active
I would like to request the version 20.3.4.0 of Creo Elements/Direct Modeling. Please provide me with the necessary download links and installation instructions.Thank you for your prompt assistance.
CS130292 : what is exactly the difference between -restart 0 and 2 ?
Hello,my new laptop doesn't have an ethernet plug with its own Physical address, and depending on where I work I plug it into different docking stations which have an ethernet plug and their own physical address.I have a nodelock license, so which Host ID should I enter into the licensing page?Right now I'm at the office plugged into a docking station, and cmd-ipconfig shows my host id is 30-13-8B-EF-C2-A9.When I start the Creo installer it shows the same host id. So I get a license file for this host id, load the file in the License window, and I get a Not suitable error.I contacted PTC licensing support and the seem to be clueless on this issue, any ideas or possible solutions?Thank you!Guido
Until now, as shown in the attached video it is possible to share several parts or assemblies from different owner in one owner only but not for in their owner...
Dear Creo-Team/Community,I'm currently trying to open Creo after some months. Creo asks for an activation key, which I've tried to created manually on the redirected creo.com website. Sadly it isn't working anymore. Can anyone please help?
Hello Community!Can you help me? Which extensions does Elements/Direct Modeling Express read?
I use Creo Elements/Direct Drafting (Mixed UI). I want to turn on Part brower as the below picture to manage layout. Please guide me how to turn it. I appreciate your prompt response.
I just upgraded to 20.6.0.0.0. Every time I load from Model Manager or from a local drive, Modeling does a part check. I have assemblies with thousands of parts and this really takes a long time. Is there a way of turning off the part check at load? This is really not necessary since I create and saved the files and know they are good. I manually run part checks when I think they are required. Tom
Hi guys, hope you all are doing well . Need guidance. Whenever I enter text in creo .sec file, the triangle border appears and I cannot remove it. And it shows even if I export that file into another format. Please guide me how to remove it. I am using creo 10.
Option CENTER_LINE is default when I dim circular in CED Drafting 20.7. Please guide me how to set up option NO_CENTER_LINE is default.
1. Describe the ProblemPrevent incorrect unfolding on the drawing The base area must be specified when creating the development. If the wrong part is clicked on by mistake, the wrong development will be on the drawing. If a DXF file is used for production, the wrong part will be delivered! This article is already availableCS290414 - Flat view of a Sheet Metal part doesn't belong to the viewset in Annotation This should be prevented. One variant would be that only the model with the active view set is displayed.Perhaps there are even better solutions. See also the attached file and video.2. Are you using a workaround?When creating the unfolding, it is important to pay close attention to which model is the right one for processing.3. What is the use case for your organization?There are always cases where the wrong processing is on a drawing. If DXF is now used for production, the wrong part is delivered! This results in higher production costs and delivery delays.4. W
To get the a part volume, in LISP we can use the function(sd-call-cmds(get_vol_prop ...Is there a way to have the total surface area of a part? I am using PTC Creo Direct Modellin v20.5.
Can somebody at PTC please have the common decency to advise us on the intentions of the License Server for Modeling Express 8. Either that ore release the product from this requirement. Regards (but not expecting a reply from anyone in the know)
Dear Team,When I am trying to install Creo Element direct modelling 20.7, I got this error. I know this is specific to Windows, but somehow I am not able to fix this, please help me. OS- Windows 11 HomeProcessor - AMD Ryzen 5 Note- In Windows 10 it works perfectly fine.
How can I load a sketch via command line that is placed as a child of the frame?In my case I would like the "logo" sketch to be placed as a child of the "cart_A3" framethe command line command to load the sketch is:sd-am-load-sketch I' have Creo Elements/Direct Modeling 20.5.1.0
Then I have assemblies with mechanism constrains, Creo wants to check out the components then I drag it.Are there any config options to set, or any things to do. So the components didn't get an update in the workspace?
Im working in teh Creo Elements/Direct 20.2.1.0 For example if a i have 50 threaded M6 holes and i want to change all of them at the same time to partially threaded blind hole is it possible? Thanks in advance
Good Morning, I have some difficulty with the English language. My company recently purchased a Creo 10 license. I was wondering if it is possible, and I hope so, to be able to convert parts of surfaces into a solid part by knowing the thickness. Thank you
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Elements Direct Modeling 20.7.0.02. What is the problem?Automatic bolt hole circle creation does not work in Annotation if the bolt hole circle was created with a 2D profile Automatic bolt hole circle creation does not work with 2D punched patterns in Annotation Automatic bolt hole circle creation only works when using 3d feature as Machining or Custom Feature 3. Are you using a workaround? If yes, please describe it.After automatically creating holes with SolidPower or by working with 2D patterns and then punching, the holes must be defined again as a form element4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The automatic hole circle detection should work with any radially arranged holes on the same axis5. What impact does this problem curren
1. about meWe are producing articles for shop equipment. I'm a developer for metal and plastic components, assemblies and part lists. Responsible for all communication with peripheral departments like production, sales, purchase and marketing. 2. softwarePTC Creo Elements Direct Modeling 20.0 including sheet metal and Phoenix PDM 11Additional Solidworks and Blender. 3. ideaPerspective 3D view in Annotation. 4. use caseNot a daily task. Some 3D views of very long or big parts look funny in this straight 3D view nowadays. 5. valueWe often make pictures for manuals or customers (pdf). Then a more realistic view could be helpful for "CAD-Foreigners".
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?20.6 2. What is the problem?In Annotation, drawings can greated with the multi-language drawings module, in several languages.With the multi-language drawings module, the production data (PDF) is created with the set language by the user. So it can NOT be guaranteed in which language the production documents are available.3. Are you using a workaround? If yes, please describe it.We use a language module from MAIT, which was programmed for us. The language change takes place in the TaskAgent with the Drafting.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.- The use of the language module makes sense if there are several development and production sites.- One development site can create the document in its local language.- Other development sites can switch to their
[Original title: Creo Elements/Direct License Server20.6にてUserIDが正しく取得できません。] 1.どのような製品とバージョンを実行していますか?What product and version are you running?Creo Elements/Direct License Server20.6 2.問題はありますか?What is the problem?UserIDが14文字以上の場合、UserIDの尾が削られて正しく表示されません。例えば、添付ファイルにはUserID欄にkouta.hachimoと記載がありますが、正しいUserIDはkouta.bashimotoです。If the UserID is 14 characters or more, the tail of the UserID will be truncated and will not be displayed correctly.For example, the attached file has kouta.hachimo in the UserID field, but the correct UserID is kouta.bashimoto. 3. 回避策を使用していますか? 「はい」の場合は、それについて説明してください。Are you using a workaround? If yes, please describe it.いいえ、回避策はありません。No, there is no workaround. 4. あなたの組織のユースケースは何ですか? あなたのアイデアが中断の中でどのように機能するか、またはそれが 実際の状況にどのように適用されるかを説明してください。 What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. 5. この問題は現在、あなたの組織にどのような影響を与えていますか? (影響を受けるユーザーの数、生産性の低下時間
Greetings! Is there a module/macro/expansion for Creo Elements Direct Modeling similar to the Toolbox in Solidworks? Currently, when I want to grab a fastener. I have to go to a webpage built by our organisation. Download a .sdexp file and drag that into Creo. And Creo loads it from the database. This works fine. But I'd much rather have an interface within Creo itself that has this functionality. My previous post was about customising my toolbar. And since then I've familiarized myself a bit more with the LISP programming language and the Syntax used by Creo. I am not a programmer by any stretch of the imagination, but i do have some basic knowledge. So if there is no such module available. I would like to try my own hand at developing such an interface. Both to make something useful and to learn to program such a tool. I downloaded a Pipe Measure Tool from the http://osd.cad.de/ website. But I was not happy with how it functio
Creo Elements Direct Modeling 18.1 When creating drawings of models with multiple holes in a radial way (e.g. flanges), a pitch circle diameter has to be created and dimensioned manually. It would be very useful to add functionality that creates and dimensions the pitch circle diameter automatically. When the radial pattern changes (pitch circle diameter), this should be updated automatically (associativity). e.g. option in annotation to calculate and show symmetry or center lines
PDF created with CoCreate Drafting/Annotation should contain real Texts which can be copied. Texts could be searched/copied/highlighted from the Document. Documents could be indexed by Adobe Catalog -> Full Text Search Engines can find Contents of Documents.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.