Recently active
I’ve mirrored two parts. The part mirrored in Parametric has no line after mirroring, whereas the part mirrored in Sheetmetal does. Has anyone else experienced this?
If I select the part name in the top of the model tree instead of features within the model tree, I don't get the unwanted line (as shown below). Thanks Martin.
So I guess my image for Sheetmetal is for mirroring features and not the whole part?
Thanks. I'm ordering the 7710 with the M3000, that's why I was following this thread.
Antonius,Is your laptop the Precision 7710?
Thanks Doug. I had made an extruded cut with thin features in Parametric, and I would always get that small line in the middle of the radius in the wrong direction. But making the part starting in Sheetmetal, I was able to replicate it the way you did.
How do you bend this?
I've seen at least one discussion on this topic, and I've pulled my hair out on at least 2 occasions now trying to fix this problem.If I tell everyone and post it to the social media cloud maybe I won't forget next time. Lesson learned: Document, Document, Document.So, you create a new drawing and the format keeps showing up new in the workspace.You have formats in Windchill, and it shows the conflict.You select the format and perform an update to re-connect it to the Windchill copy of the format.But why should you have to update every time? You don't!Here's our setup: Start files and Templates Stored on a Fileserver Formats Stored on a Fileserver & Stored in Windchill &
I was able to replicate the bend, but I had to build three planar walls to do it (model attached). I was wondering if someone knows how to do it with just one bend with two walls or one bend and one wall. Thanks in advance.
Wipro Digital had the opportunity to host Professor Harald Haas at our headquarters in Bangalore. For those of you who are not familiar with Professor Haas, he is a physicist and professor of mobile communications at the University of Edinburgh. He is also the inventor of “LiFi,” a technology he shared during his Ted Talk, when he outlined the idea of using light bulbs as wireless routers.Li-fi is a disruptive technology that uses the visible light spectrum to transmit information at very high speeds, in contrast to established forms of wireless communication such as Wi-Fi uses traditional radio frequency (RF) signals to transmit data. “pureLiFi,” a company Haas founded with a group of researchers, has already created two products which are bound to completely disrupt a number of industries, least of which, is IoT communications.Haas addressed a packed room of eager Li-Fi fans and curious employees on this technology, which is predicted to grow to a USD 113 billion global industry by 2
Overview:Wipro's digital transformation arm, Wipro Digital, is a thought leader of breakthrough IoT solutions that enables enterprises build connected, customer-shaped ecosystems of products and customers. We dream, design, and deliver people-centered and human-shaped experiences for a digital world and are an innovation-led, digital transformation partner built for today’s digital challenges. Our world-class and expert teams in strategy, design, adaptive architecture, service integration, engineering and delivery support the end-to-end digital transformation needs of clients, accessing innovative and disruptive technologies such as cognitive computing, cloud, smart devices, internet of things (IoT), open source and more.Latest News:• Wipro Digital to speak at the WEBIT.Festival, Sophia on Apr 19-20• Wipro Digital to speak at the IoT Applications Europe in Berlin on Apr 27-28• Wipro Digital basks in the brilliance of LiFiBrochures/ Documents:Here are just a few of our capab
In an age when billions of devices are connecting to the cloud to deliver business value, IoT adopters around the globe are challenged with an ecosystem encompassing a broad spectrum of devices, technologies, platforms, communication modes and protocols. Unfortunately, this lack of standardization and the need for multi technologies keeps the full range of IoT benefits out of reach. There is an immediate need for innovative connectivity solutions which can handle a variety and unprecedented volume of data.The IoT ecosystem encompasses a range of industries, devices and applications with their own specific protocols and standards. Most IoT platforms are equipped with software that translates device-specific native communication into something the platform can understand. Solution providers must then create decoder for binary data, which is transferred from device to platform, increasing the time to market of solutions.At Wipro Digital, we’ve developed the Universal Data Parser (UD
It’s rare that UX and IoT/M2M are part of the same equation. If you work with a team on IoT solutions, the discussion will tend to focus on sensors, devices, data collection, data transmission, analytics and real time processing. But without UX in IoT, any scalable, fault-tolerant, and rugged solution will fail to drive business value. What’s the point in collecting, storing and presenting information if it cannot be understood, actioned swiftly, and produce business benefits?The key to any successful IoT solution development and implementation is to add “experience.” While designing, we should ask customers:Who will be the users of this system – internally, externally, by category, role or demographics?What does the customer journey map look like?How will users access the system and for what purpose?Covering Data Security and privacy in terms of who has access to what data?What processes will be impacted?What are the KPI’s and SLA’s that may be impacted and/or improved by the so
We have many “things” embedded in our daily lives and if any of them fail, life becomes extremely difficult. A few months back, a friend mentioned an instance when his Internet was down, due to a router issue. This happened on the first day with a new service provider. After a long call with customer support, the issue was still not resolved. A support representative finally informed that him that a support engineer would make an onsite visit in a few days to fix the issue. This impacted his entire family, and the next day he switched the service provider though it meant losing money in the process. He might have been a life-time customer if the issue was taken care of quickly. It’s possible that the fix involved a simple router configuration. With the service provider’s current set-up, this fix involved the time and effort of a call center representative, a dispatch and a support engineer. It also would have involved the cost of transportation for the support e
It is very difficult to create effective end-to-end security in a multi-vendor solution. And almost all IoT solutions sold to public and private sector organizations are multi-vendor. So what can an organization do to take advantage of the IoT while minimizing security risks? In this report, MachNation presents 10 recommendations to help public and private sector organizations craft a holistically secure IoT solution. Wipro is ranked among the top 5 global IoT security providers.
As your enterprise embarks on a digitally connected journey, there are many challenges to overcome. This is where Wipro Digital brings in a specialized team of IoT experts stand committed to assist you in every step of your transformation journey.
As hundreds of thousands of your assets get interconnected, managing your complex infrastructure and the ocean of data it creates becomes a herculean task. Our IoT command centre provides 24/7 global support to monitor, control and analyse your diverse and complex enterprise infrastructure, leading to significant business benefi ts.
When information seamlessly flows from the enterprise to the shop floor and finished products, unthinkable possibilities emerge. From radical improvements in productivity and quality control to deep new insights for your R&D team, IoT promises to herald a new Industrial Revolution. At Wipro Digital have some breakthrough IoT applications that can help deliver business value.
ThingWorx Edge Products Announcement The ThingWorx Edge Android SDK, v1.0 is now available for download from the PTC Support site, Downloads page. This SDK is intended for use in creating Android applications that take advantage of the AlwaysOn protocol. It is based on the ThingWorx Edge Java SDK, v.6.0. ThingWorx Connection Server, v.7.1, introduces an architectural foundation that enables ThingWorx Platform to communicate with devices that use different protocols. Built on the core connection server framework, the adapters enable the Platform to communicate with any device and any device cloud, using TCP/IP protocols. With this release, two “flavors” of connection servers are available: ThingWorx Connection Server, v.7.1, which provides the AlwaysOn adapter that is built on the core connection server framework ThingWorx AWS IoT Connector, v.1.0, which provides the AWS IoT adapter that is built on the core connection server framework
IBM i 7.3 is announced and will be generally available Friday April 15, 2016.We're running Implementer Version . . . : 11.2Is that ok to run on IBM i 7.3?IBM i 7.3 can deliver significant client value for database and security, and support for industry-leading workloads lik…
Is there a specific course or classes/discussions for executives at this years Live Works? We are trying to get our VP to attend.
PTC Windchill 11 bietet eine zuverlässige und allgemein gültige Datenquelle für Produktdaten und Prozesse, die den gesamten Lebenszyklus von den Anforderungen bis zum Service abdecken. Neue Aktualisierungen bei der Stücklistenfunktion ermöglichen die bessere Verwaltung einer kompletten, interdisziplinären Produktdefinition. Nehmen Sie an dem Webcast am 3. Mai teil, und erfahren Sie in 45 Minuten, wie PTC Windchill 11 PLM-Daten mit folgenden Merkmalen bereitstellt: Multidimensional: Anforderungen und PLM-Daten werden integriert Transformativ: Die Stücklistenansichten für Fertigung, technische Entwicklung und Service sind synchronisiert Prozessorientiert: Zentrale PLM-Funktionen wie Änderungen, Abfragen, Visualisierung und Workflow werden erweitert Modellbasiert: Dynamische CAD-Daten werden in nachgeordneten Prozessen bereitgestellt, um eine teileorientierte Konstruktion zu ermöglichenWir freuen uns auf Ihre Teilnahme!>> Jetzt anmelden
Kromě této soutěže, kterou tradičně pořádá firma AV ENGINEERING, a.s., se můžete zapojit i do další soutěže, pořádané autorem softvéru.Kdokoliv, kdo užívá PTC technologie má možnost se zviditelnit celosvětově. Vítězové budou kromě jiných cen i finančně odměněni.Podrobnosti zde:PTC vás odmění 15 000 USD
PTC Creo View Recipe Editor controls ”What” to publish and “How” to publish the CAD data to corresponding PTC Creo View file (also called the Viewable file). Recipe Editor is a tool and an interface that allows configuration of all the settings available to the Editor.To learn more about What, Why and How of the Recipe Editor follow this link.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.