Recently active
ZETOR TRACTORS a.s.Do letošního 16. ročníku soutěže AV ENGINEERING AWARDS se přihlásilo celkem 13 projektů. Soutěžily mezi sebou projekty z komerční i univerzitní sféry a jejich témata byla opravdu rozmanitá.O letošním vítězi rozhodovala široká veřejnost formou hlasování na webových stránkách aveng.cz.Celkem se hlasovalo z 517 platných mailových adres a nejvíce bodů od hlasujících získal právě projekt "Univerzální kolový Traktor Zetor Crystal".Na 1. místo jej nominovalo 170 hlasujících a na 2. místo 70, což projektu připsalo celkových 410 bodů a stal se tak vítězem.
Since PTC had combined two events into one it seems like there are less classes dedicated to Windchill than last year....specifically I was going to bring one of our IT DB guys to learn about Windchill upgrades. I cannot find ANY class that are surrounding this topic. WHY? There are many smaller companies (like ours) that will not focus on IoT. If PTC would add a class or two about system upgrades I can assume that it would fill up, at a minimum you would get one more attendee.
LiveWorx 2016An event movement that connects every engineer, entrepreneur, maker, developer, retailer and inventor with a curious mind and an inspired heart.When: June 6-9, 2016Who? 5,000+ Innovators from Start-Ups to Fortune 500 companiesWhere? Boston, MA - Boston Convention and Exhibition Center
You can make this in Creo Parametric, because it's just a revolved sketch. But if you want to analyze it in ANSYS, you will have to thicken it for meshing. You don't have to use Sheetmetal. You can see the problem in the lower left-hand of the screen. I can make this for you tomorrow, if someone else doesn't by then.
Wouter,I'm not sure as to why you want to override the default code in Simulate for the legend. If you don't like singularities in the legend, then try plotting the region of interest.
Hitesh,Increase the accuracy under Model Properties. Also, you don't have to use Sheetmetal to create a cylindrical wall or thin wall. See the below examples.
I'm still looking for a solution to this post, after extensive research.
What are the check-in times at the convention center? It seems that things are starting on Monday this year instead of Sunday as it has been in the past.
Good day Gentlemen,It is great to be back at PTC and there is much to do. I am very interested in our regular meetings and re-establishing communications, but first, I would like your opinion of two groups and are they need.First is one that exists The PTCooler, but has very low traffic. I recall seeing requests for a place to "blow off steam" and happy to have such a space, but will it really be used? I can re-introduce the group and they may drive traffic, but what is your opinion on the need?The second does not exist, but has also been asked for: a place for networking or even job postings; do you see this a being helpful?Thanks for your input and I look forward to chatting again.Best,Toby
Hello Steven > I came across this web site, and it claims that you should be able to convert a .skp to .step with 3D Studio Max by AutoDesk (image attached). I haven't contacted AutoDesk yet to see if this is valid. I think you've already stated that it's not possible to do this. What do you think of their claim?< I started Okino 30 years ago with my primary focus on the study of how the human mind creates the illusion of reality and how human subjectivity has to form consensus based on incorrect and little data input. The #1 biggest issue in the entire 3D graphics world data relates to those wanting to do mesh -> solids conversions. Hence, as I talk about in my talks on this topic, it appears that you are still looking elsewhere to find a solution to do mesh -> solids conversions even though I had properly explained that it simply cannot be done. I often see this in my emails, given then I get about 3 to 6 people per day looking for such a solution. About
PTC University Precision LMS 8.1 was released on April 23rd, 2016.This release includes several new features.What’s new in PTC University Precision LMS 8.1:Responsive Design for My Learning pageSearch infrastructure improvementsLocal Installation with Single Sign-on (SSO)If you have any questions or feedback about this release, please don’t hesitate to comment below or email PTC University Support.
M2M MAGAZINE+ | April 28, 2016 1011 NEEDHAM, Mass.- PTC (NASDAQ: PTC) today announced the availability of PTC FlexPLM® 11, the latest version of its product lifecycle management (PLM) solution for retail, fashion, footwear, apparel, and consumer products.Are you an IoT/M2M or a Health professional ? Join us at Digital Health World Congress 2016, on June 22-23 in London. (http://digitalhealthcareworldcongress.com) Find out more about Global Digital Health Market and Health Tech Companies – Thought leaders from the biggest and most disruptive IoT, mHealth and Medical Technology companies will share winning growth strategies on the most pressing challenges business leaders face today.The release provides visibility and connectivity across consumers, products, stores, designers, and supply chains, enabling closed-loop product lifecycle management with such new features as role-based apps and ThingWorx® platform connectivity.“How Smart, Connected Products are Transformi
I sent a link to the Hi-Lok catalog in a previous post, and this has all the dimensions and geometry for pins and collars.
Thanks for adding the ticket. These types of fasteners are used throughout the aerospace industry by the millions. A few are shown below.
There are many YouTube videos on this fastener.
Hello Steven > I can't get a .skp file converted to a .stp file? Correct? Yes, correct, > It doesn't have to be a .step, but any file format that will import > into PTC Creo Parametric 3.0 (formerly Pro|Engineer) For some further perspective, for the last 20 years I have provided the world's primary ProE/Creo conversion system. 99% of my hourly business, outside of STEP/IGES conversions, is for ProE/Creo and SolidWorks. Just as some quick background, over the last 30 years I have to invent, define and pioneer the CAD & DCC conversion industry, so coming to me is similar to asking Bill Gates about Windows. For SketchUp, which is a program which should never have survived past the 2005 melt-down of the DCC industry (where almost all 3D companies went bankrupt), there has been a massive influx of people who have this desire/belief that they can "convert" from SketchUp back into a high-precisi
How do we build and store an agenda that can be uploaded to an iPhone or Android phone?Will there be a LiveWorx app like last year?
Robert Lansdale: Hello Steven Thank you for your email. It arrived just 20mins past the end of my prior work day so let me jump to your resampling question right now. I am the CTO, founder and primary system architect of Okino software over these last 30 years. I will be pleased to help you on any and all questions. Please never hesitate to drop me questions at any time, on any topic related to 3D graphics or 3D file conversion. >I would like to know if the Okino software will open a .skp (sketchup) file and export it as a .step file. No one ever converts from SketchUp to STEP or any CAD file format -- it is simply technically impossible to do. I receive this same question 3 or more times per day since 1996. It's always been the #1 epidemic question which I receive amongst all. You can't do this because STEP is based on pure NURBS geometry whereas SketchUp is one of the world's simplest polygon
Vladimir,From Robert Lansdale: Thank you for your email. It arrived just 20mins past the end of my prior work day so let me jump to your resampling question right now. I am the CTO, founder and primary system architect of Okino software over these last 30 years. I will be pleased to help you on any and all questions. Please never hesitate to drop me questions at any time, on any topic related to 3D graphics or 3D file conversion. >I would like to know if the Okino software will open a .skp (sketchup) file and export it as a .step file. No one ever converts from SketchUp to STEP or any CAD file format -- it is simply technically impossible to do. I receive this same question 3 or more times per day since 1996. It's always been the #1 epidemic question which I receive amongst all. You can't do this because STEP is based on pure NURBS geometry whereas SketchUp is one of the world's simplest polygonal modellers. You can't turn me
This a short film (no sound) on how a Hi-Lok is installed with a collar.https://www.youtube.com/watch?v=d_Fx0766n3k
Group,Does IFX have Hi-Lok pin and collar models in its default database? Thanks in advance.PinCollar
Oliver,Hi-Loks are used in the Aerospace Industry, and we use a lot of them and various types. For now, I create my own Hi-Lok fasteners (bolts and collars), but there so many of them, and I've attached a catalog link.http://www.lisi-aerospace.com/STANDARDS/Pages/Hi-Lok-Pin-table.aspxI would be nice if b&w would add these to the database. Thanks for your help.
But it's still a good example for someone who hasn't been exposed to ISDX or experienced it before.
Vladimir,Thanks for the links. Now I just have to figure out how to convert Google .skp into .stp, or some type of format that I can import into Creo. I've been reading several blogs in grabCAD on how to do this, as this is something I've never attempted before. Have you actually converted a .skp file to .stp?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.