Recently active
Headquartered in Teaneck, New Jersey (U.S.), Cognizant combines a passion for client satisfaction, technology innovation, deep industry and business process expertise and a global, collaborative workforce that embodies the future of work. With over 50 delivery centers worldwide and approximately 233,000 employees as of March 31, 2016, Cognizant is a member of the NASDAQ-100, the S&P 500, the Forbes Global 2000 and the Fortune 500 and is ranked among the top performing and fastest growing companies in the world.Brochures/ Documents:Cognizant IoT SolutionsAPEX IIoT Solution FrameworkDemo Videos: Video Link : 1451 Video Link : 1453Supported Regions:GlobalCustomer Success:150110_IoT_connected_surgical_devices.pdfIoT Connected Restaurant Fryer150112_IoT_oilfield_services_sensors.pdfContact Information:Internet of Things | Cognizant IoT Services| Cognizant Technology Solutionsprasad.pashte@cognizant.com
Join me along with industry and PTC experts in a discussion on ECAD Library data with WindChill.This is a comprehensive panel of experts that can answer all of your questions on ECAD in PLM.Registration details and links are in the information below.Can't make this session? Call or text me for a one on one at your convenience.Wednesday, June 8, 9:15 AM - 10:15 AMPanel Discussion: ECAD Library Collaboration Exploration-- Thanks,Scott Claesscott@claes.biz
I see that the resource center is saving the sessions I mark. How do I see an overview of the agenda I've built?It would be very helpful to see all of the sessions, sorted by tracks, laid out on one sheet to help eliminate conflicts.Thanks,Casey
The "user" that I have configured is having access to the PTC.ConvergeConsole, but all the tiles in the Console are missing. This is the error message that occurs: [context: com.thingworx.webservices.context.HttpExecutionContext@6dc080f2][message: Entity Not Found : [PTC.ConvergeConsole.DataTable]] How to fix this? http://support.ptc.com/cs/help/thingworx_hc/thingworxutil_7.0_hc/index.jspx?id=Converge_AcceleratorManageAccessToAssets&action=show
Good day everyone,I would like to share the layout of the Xtropolis show floor with you and point out where I will be.I will be in the PTC Community booth stationed within the Think Tank and the PTC/User Board will be right next door.Please stop by and say hello.Best,Toby
The ThingWorx Powered By Partner Program Guide describes program requirements and entitlements.
Partnering with Cognizant: Today's leading companies are building IoT roadmaps to reimagine their operations and business models with the power of digital, analytics and automation
This document outlines Cognizant's IoT Solutions, providing an overview of the IoT practice and our point-of-view on the Internet of Things.
Hi i notice the lack of the tool holder control in NCI set it in tool definition and added the two parameters with their value.No check performed!!!!ByeOsvaldo
I got Parasolid1 to import with no problems. Thanks.
Další novinkou PTC Creo Parametric 3.0 je vylepšená integrace s PTC Mathcad.Nově lze Mathcad soubor vnořit do CAD modelu, takže spravujete pouze 1 soubor. Toto ocení nejen uživatelé Windchill.Funkci naleznete v záložce Aplikace / PTC Mathcad a máte možnost vytvořit, nebo otevřít Mathcad soubor.Mathcad Vám přináší především Výpočty psané v přehledném formátu včetně obrázků, grafů a dalších speciálních funkcí. Podrobnější informace naleznete v datasheetech.Mathcad počítá s jednotkami, takže pokud používáte ještě k výpočtům MS Excell, je nejvyšší čas uvažovat o změně.Samozřejmě, že můžete propojit kóty, či parametry s vstupními a výstupními políčky Mathcadu.Zde je krátká ukázka návrhu pružiny.
I want to offer a new feature for all forums. Along with all the familiar option of showing number of views "# Views", I propose to introduce an new feature "Downloaded # times" (or "# Downloads") for attached (or created as a separate files/documents uploaded by members) content that shows to us a number of downloads for this content.On many forums and communities such option exists and allows everyone to see the relevance and popularity of content, and member, upload it file for discussions, be able to assess how the other members are actively analyzing his problem. Here's how it can be like:Is it possible to implement this part by using Jive?So what do you think?
You can open your results without having to open the model, as shown below.
PTC's Hiren Kumbhojkar shows how Windchill Service Information Manager integrates with Arbortext Editor Unable to play video. Please try again later.(view in My Videos)
Das Verwalten von Dateien sollte nicht mehr Zeit in Anspruch nehmen als das Erstellen. Deshalb haben wir Mathcad in Creo integriert. So werden Sie vom aufwendigen Synchronisieren Ihrer Konstruktionsberechnungen und CAD-Modelle entlastet.Mit dem Entwicklungsnotizbuch mit der Power von PTC Mathcad können Sie Ihr Mathcad Arbeitsblatt in das CAD-Modell einbetten und Daten bidirektional austauschen. Mit anderen Worten: Wird eines geändert, werden die Änderungen automatisch im anderen nachvollzogen. Das Ergebnis? Geistiges Eigentum, das aktuell und leicht auffindbar ist und zentral verwaltet wirdIn diesem Webinar zeigen wir Ihnen: Effektive Möglichkeiten zur Dokumentation der KonstruktionsabsichtWie Sie mit Ihren Mathcad Berechnungen direkt das 3D-Modell ändern könnenWie Sie Mathcad zur Validierung oder Verifikation Ihres 3D-Modells nutzen können Seien Sie dabei, wenn unsere PTC Mathcad Experten René Büttner und Detlev Mohr am 16. Juni 2016 um 14 Uhr Ihnen die neue Integration live demonstr
In Creo 4 B000 Lattice Tool is not active! Why?
PTC Creo Intelligent Fastener Extension (IFX) = rozebiratelné spoje, které automatizovaně vytvářejí otvory při vložení do sestavy. Šroubové spoje se vyskytují ve většině konstrukcí. K tomu, abychom je vložili do sestavy musíme vyvrtat správné otvory. Když je to závrtný šroub tak do jedné desky vyvrtáme průchozí díru s vůlí a do druhé díru se závitem. Vyhledáme příslušný šroub (jeho normu, průměr, změříme potřebnou délku) a vložíme jej do sestavy. Pokud potřebujeme přidat podložku, je třeba ji vložit před šroub, nebo změnit výšku dosednutí šroubu. Podobně postupujeme u matice a případně její podložky.Pokud budu dělat více stejných spojů, budu využívat násobení ať už otvorů, tak i spojovacího materiálu. Zkrátka je zde celá řada variant a činností, které mohou být časově náročné a zdrojem chyb.Při úpravách geometrie mne bude zajímat zdali:Plní šroub svou funkci? (je správně dlouhý, aby byl patřičně zašroubovaný?)Mám správné průměry děr včetně tolerancí? A to na všech vrtaných dílech a výk
You don't have to open the model in order to see the results once you've made the runs. You can go directly to the results from the Creo GUI. I can show you a screenshot of this on Tuesday.
I'll check these next Tuesday. Thanks for posting.
Trying to use the LiveWorx 2016 Agenda Builder. Does anyone know if there is a way to sort the presentations by type of presenter (customer, PTC, and vendor) as in previous years?(Jen McManus ??)
Good day Gentlemen,I know it has taken some time, but PTC Live Global 2015 Presentations & Videos has been updated with some great content - give it a look.I have been working with the folks in marketing to have a steady roll-out of content for LiveWorx so there is not one large "content dump."Have an excellent weekend.Best,Toby
Installation is through a web install only. PTC login credentials are required with a valid e-mail address. There is no downloadable CD image.
Dear ThingWorx Partner, You are cordially invited to the ThingWorx Partner Summit, our annual event that gathers leading partners from around the world to celebrate our success and chart our future together. Dive into strategic discussions, executive meetings, technology portfolio updates and endless networking opportunities. Co-located at LiveWorx 2016, you’ll join our ecosystem of IoT partners that are driving the future of IoT. ThingWorx Partner Summit: June 6, 2016 in Boston, MA Westin Boston Waterfront Luncheon and Formal Program 11:30am – 5:00pm Partner Reception and Partner Awards – Legal Seafood’s 7:30pm RSVP Today, This Invitation-only Event Will Sell Out Get the latest PTC and ThingWorx GTM strategies from our executive team including PTC President and CEO Jim Heppelmann and ThingWorx Group President Rob GremleyLearn directly from Product Portfolio leads how ThingWorx, ThingWorx Analytics, Kepware and Vuforia complement and differentiate our IoT Platform He
Hello,Is Neo4j available for ThingWorx 7.1 (as referred in 7.1 vers. Installation guide) ?IF yes, where can we find the related distribution (under Downloads section, ONLY ThingWorx PostgreSQL available - for any 7.* vers.) ?Many thanks in advanceRegardsJames.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.