Recently active
Hi Robin,It's not uncommon to see "elements not converged" in the run summary because of the way the model was setup. To eliminate this, one needs to include predefined measures in the regions of interest. Plot convergence on the regions of interest, not the whole model. When you exclude elements, this only excludes from measure in the run summary and not the fringe plot legend. I have not look at your model, but if I get time today, I will, and show you an example of stress convergence plotting for the hole and the bend. I think you stated these are the regions of interest. Also, what is the mating geometry that assists in lifting the lug? For example, is it a large pin? Or a hook, etc.?
I have a PDF file that I have created and is located in the Filerepository. Now I'm looking for a way to download it to the clients download folder on his local system.
Hi All, I have updated from Thingworx 7.1 to 7.2 and imported all new extension versions including utilities package. After the successful importing, "PTC.ConvergeConsole" mashup does not work. Please see the attached screen shots. Errors are: - exception in handling a trigger in datamanager.controller.js for def... - Runtime exception handling data update for binding.. - Error in invoking service Things_PTC_ConvergeConsoleHelper, GetConsoleTilesLocalized, Things, PTC.ConvergeConsoleHelper, Services, GetConsoleTilesLocalized. Error from the server: "Invalid service name: GetConsoleTilesLocalized" It seems like the problem is related with "GetConsoleTilesLocalized" service, which is not present in "PTC_ConvergeConsoleHelper" thing. Any ideas about this issue? Thanks in advance.
Aberdeen's Aly Pinder recently posted a blog that covered the impact of service parts management on organization revenue growth. His blog also highlighted two important ways in which service parts management can improve the customer experience. Given that customer experience has become a cornerstone of the modern business strategy, there are two points that deserved a little more attention.When you're considering ways to optimize your service parts management strategy, consider these two customer experience boosting concepts:Meeting Customer Needs Through Better Parts Pricing -- Advanced parts pricing models that align value to customer needs and the resell of refurbished parts provide your customers with more options and your organization with more revenue opportunities.Providing Better Field Service -- Customers expect technicians to resolve an issue on the first visit. Better service parts management ensures that techs have the right parts when they arrive to resolve customer issues
You could also make this with the Warp tool.
The default print quality setting - 3 (Complex overlap check) is still broken in Creo 4 B000.What actually exists in the drawing:What gets printed (notice the loss of some lines and the addition of others):This has been happening since the later releases of Wildfire 5.0 and it still hasn't been fixed. https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS70635(P.S. This is not just for exploded views. The views shown above are not exploded.)
Administrative User Interface Is Updated
Design Tracking Is Improved
Classify Surfaces by Pull DirectionShape Volume Tool is AvailableAutomatic Volume Tool is AvailableFlexible Modeling in Mold and CastSilhouette Curve EnhancementsVolume Split Enhancements
Link attached. This thread was not posted as a question, but just for discussion.https://www.ptcusercommunity.com/thread/105980
A cope should not affect the overall length of the tube in the BOM. I did a lot of pipe coping to manufacture hand railing, and the template for the cope was right up to the edge of the tube. Perhaps it affects in what you're trying to do.
Can someone tell me how to create reports in PTC Windchill 10.2?
Then I would recommend moving this discussion to the Visualize Community.
Why not make the cope a feature of the part? Since you have various lengths of pipe, some with a cope, some without, you can always adjust the geometry of the tube and suppress/resume the cope when needed.
I submitted a Product Idea to enhance this.https://www.ptcusercommunity.com/ideas/7855
PTC has responded and stated that after making the text flat to screen the text size cannot be changed. While zooming the assembly in/out the size of the font is constant.
There are two basic questions:1) Why doesn't this function?, aka, this is basically broken. Example: Creo crashes on start or video is slow or defective.2) How can I get this to do what I want?, aka, it should be possible to do what I imagine but think it is hidden.In the first case it is important to capture if the failure is following some obvious change and, if so, what that change might be. Examples include trying to run Creo on a laptop with a gaming video card or someone has made a change to the config options or license server. There is a clear path that the user is following, but it leads to failure. To solve these the first step is to get answers to a limited set of questions, such as:Did this setup work yesterday?Is the OS supported? (Which OS is it?)Is the graphics card supported? (Which card and driver is it?)Are the config options the same as yesterday?Is the user solely responsible for altering the machine software/license server?Has any hardware been replaced?Do you have
Improvements to Play-Path FunctionalityImprovements to Play-Path FunctionalityResolution Limit Is RemovedMaterial Removal Is Improved
You have probably figured this out by now, since this post is over a year old. But the way you move the text is illustrated below. Open up the dimension properties by double clicking on the dimension with the LMB, and you can Move or Move Text.
Hello everyoneI am planning an upgrade from Implementer 2009 to Implementer 12.0In Implementer 2009 the default product libraries were MKSIM and MKSIRIn Implementer 12.0 it would appear the default product libraries PTCIM and PTCSIRI have read the Implementer 12.0 Installation and Administration Guide but it doesn't refer or mention how to deal with the old MKSIM and MKSIR names, does the upgrade process take care of this and rename them to PTCIM and PTCSIR ?Many thanks in advance.
On behalf of the PTC team I would like to extend my gratitude to everyone who took part in the Creo 4.0 Sneak Peek trial. The comments and feedback have been wonderful and will really help to shape Creo 4.0 and beyond.For PTC this has been a very valuable experience, which would be impossible without such an active dedicated community. I hope you all enjoyed using the new features in Creo 4.0 Sneak Peek, and obtained a great insight as to what is coming later in the year. If you have any feedback on how PTC can improve the beta testing in the future, then please do let me know. Best Regards, Jim
To PTC representatives,I am just curious on the overall take of Creo 4.0 from those who tested this out was.I know I saw several comments from people who could not get it installed, but wondered how the majority of comments went. Were they favorable, okay, not much better than 3.0, or OMG this much better.I, myself, liked some of the small things that will make life easier when going to Creo 4.0.GD&T advisorOn screen toolboxFull screenDennis
Boolean OperationsMore Flexible Handling of Assembly StructureNew Mirror Component and Datum Creation Tools in AssembliesUsing Move in an Assembly EnvironmentCross-Section Tools in an Assembly EnvironmentAdditional Sketching ToolsImproved Usability and Interaction WorkflowEnhanced AppearanceQuilt Attachment ToolQuilt Surface Extension ToolsNew Mirror ToolImprovements to Move and Rotate, Substitute Faces, and RemoveImprovements to Extrude and RevolveNew Geometry Search ToolImproved Mini Toolbar, Shortcut Menus, and Shape SelectionRicher Set of PTC Creo Direct OptionsImprovements to Color and AppearanceUser Experience ChangesImprovements in Data Exchange
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.