Recently active
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: highKB internal ID: AI 1044789KB is asking for the possibility to select the copy fields during the branch of a document like it is available on the copy item. E.g. sometimes they want to branch the doc with the comment attribute and sometimes without comments.
Attributes:Current Software Version: 10.7Technical Area: Usability, Dokument ViewBusiness Impact: mediumPTC Case: C12956110
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: mediumKB inter ID: C12956114
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: mediumKB internal ID: AI 1137156PTC Case: C12955126Conditional formatting in Document View, e.g. category "heading", font automatically set
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: highKB Comment: An external report is not sufficient
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: highKB internal ID: AI 1137126PTC Case: C11066639Enhancements to the Integrity document history view, e.g. possibility to identify changes on text fields, changes from user on the whole document
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: lowKB internal ID: AI 1137216
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: lowRFC: 229376SPR/RFC: 1022549
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: lowKB internal ID: AI 1137145
Better handling of bookmarks, e.g. creation of lists of bookmarks in Word Export, show available bookmarks when creating new crossreferenceAttributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: lowKB intgernal ID: AI 1137364Case ID: 11762521
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: HighCase ID: C12979921SPR/RCF: 101910KB internal ID: AI 1137363KB Comment: Edit in Word not accepted
VUFORIA is now available to use with IOS, Android, and UWP (Universal Windows Platform)Can download the app from Google Play Store, and Apple Store.Read the complete article here.
Not sure, is PTC going to rebrand again? Noticed a change in logo
Hole feature notes are still easily broken if a dimension or parameter is created that happens to match the ones used internally by the hole feature. The hole feature note should only be referring to parameters within it's own feature for note generation.Example:1.) Create standard hole feature:2.) Create something else with either a dimension or parameter that matches one used internally by the hole feature: (ex. Plane)3.) Create another hole feature. Notice how the thread depth callout is wrong (should be 0.480 is this particular case):4.) Edit definition on the first hole, but don't actually change anything. Notice how it's note is now wrong as well.5.) Now delete the plane (with the THREAD_DEPTH dimension). Both hole note annotations are broken:Solution - The hole notes should be looking at their own feature parameters and nowhere else!There is already an open SPR for this issue. It's been open now for 3 years.
Ptc Recently named “clear market leader”PTC Recently named as the IOT Technology leader
I was just reviewing CS146957 where it discusses the Dx45 chamfer callout and how it doesn't meet ASME Y14.5 standards.The article goes on to say that this will be enhanced in Creo 4.0Just for fun, I tried this in Creo 4.0. I don't see any change. The "x" is still lower case and there aren't any spaces.Does anyone know if the ASME standard changed to allow no spaces and a lower case "x"? If not, then it looks like this enhancement didn't make the cut.Edit: Resubmitting due to Jive notification issue on August 5th.
I hate to say it but the options Creo has always has regarding surface finish symbols are dismal at best. There are really only 3 options available currently and these only offer roughness height as a value to enter. There are at least 4 other variables that can be displayed with the ASME Y14.36M standard including a symbol for the lay. Also there are no options for the older style triangle notations. It would be nice if there was an option box similar to the GD&T toolbar where you can build the symbol by selecting what you want in each portion of the symbol. Instead of it basically being a symbol with variable text. I would think this would not be a difficult improvement to implement. And I know I am not the only one who would like to see this option enhanced.
When using sketcher there is edge/geometry snaping for auto generating references. But this does not work if sketcher plane goes trough model, when "clip model" is on.Is there a plan to implement this? its basicly snaping to take Xsec references.
In a blog post originally published in April of 2013 but recently re-released, Christa Prokos examined the need for simplicity within complexity for technical information in a global environment:Although “it’s not uncommon for a product to be designed in one country, assembled in another, and then sold and serviced around the globe,” getting the information you need shouldn’t be.“In a perfect world, product documentation would be concurrently authored, delivered, and referred to in multiple languages” so that you can focus on the most pressing demands of each product roll out.In reality, simplicity can be difficult to attain. Christa goes on to explain that a product-centric approach can help manufacturers meet the global challenges specific to technical information. She also explains how PTC can help make technical information:Easier to Find Easier to Understand  
Gentlemen,I will be out of the office 8/31 - 9/7; returning to the office Thursday the 8th.Carrie Muller will be watching the community.I will be checking in while away, but please get with Carrie for any questions or issues.Please be on your best behavior 🙂 and may I ask you dish out a bit more of your attention and greatness while I am away?Best,Toby
I am 99% sure I saw somewhere that coordinate systems would zoom in Creo 4. just like planes. I just tested this in the beta and they don't zoom, they stay the same size on the screen. Is this behavior coming in F000 or am I getting mixed up with something else? P.S. It would be nice if the text would also scale down once the plane/csys reaches some sufficiently small size on screen. (Yes, I know the text can be turned off..)Edit: Resubmitting due to Jive notification issue on August 5th.
Hello Everyone,i've a problem with thingworx 7.2.I'm trying to install it but there are connection problem with the Database.Log says:[L: ERROR] [O: c.t.s.ThingWorxServer] [I: ] [U: SuperUser] [S: ] [T: localhost-startStop-3] [message: Connections could not be acquired from the underlying database!]2016-09-02 17:45:29.426+0200 [L: INFO] [O: c.t.p.p.PersistenceProvider] [I: ] [U: SuperUser] [S: ] [T: localhost-startStop-3] Connection ThingworxPersistenceProvider, type PostgresPersistenceProviderPackage stopped2016-09-02 17:45:29.426+0200 [L: WARN] [O: c.t.p.p.PersistenceProvider] [I: ] [U: SuperUser] [S: ] [T: localhost-startStop-3] Could not find persistenceProviderPackage PostgresPersistenceProviderPackage and thus could not stop data processing2016-09-02 17:45:29.426+0200 [L: ERROR] [O: c.t.s.ThingWorxBootstrapper] [I: ] [U: SuperUser] [S: ] [T: localhost-startStop-3] [message: Unable to initialize and start system: Connections could not be acquired from the underlying database!]2016
I can see why you were having problems filling this in. I haven't finished yet, but here's an image of the blend on one side, other side is similar. You have geometry that really isn't suited to a boundary blend then thicken. So another approached would be to fill all the boundaries with surfaces, merge them, then solidify. But that's just one way. You could also, I think, fill this in with a sweep with trajectories.
If you have the Advanced Fastener Tool, you can calculate the shear, axial, and bending stresses in the bolt through two components.
Do you have the Advanced Fastener Tool in Simulate?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.