Recently active
Stephen,Selecting "Yes" to unalign all external references for Extrude 2 and Extrude 3 resolved the problem. When I first opened the model last Friday, I didn't see any missing references, as you posted. The warning was "outdated components/references". Anyway, that was the fix and thanks for looking at the model.
Good day Gentlemen,While I prepare for our FY16 recap, I am going over many sets of numbers. The chart below shows question volume and you can see the difference between discussions and questions. When people start a discussion, there is a default that marks the discussion as a question; once it is marked as a question, answers within can be marked as correct. As discussed before, marking answers correct makes those solutions easy to find. Over the last year the difference between discussions and questions is 552 and I am concerned there is knowledge that is not found.My question for you:Just like ensuring content is placed within the correct product community, is it important to toggle discussions to questions?Do you search discussions for important content or do you stay focused on questions?I have spot-checked a few within discussions and there are questions within.Thank you very much for your time and suggestions.Best,Toby
Good day Gents,I do not see my streams or things within the inbox and have opened a case with Jive.Last time they said is was our EAE server.Please let me know if you see the same.Best,Toby
Perhaps you could sketch a point, pattern it on a curve, then pattern the pattern around the sphere. You would have to leave a space for the point on top of the sphere, but I think this would work. Do you have an image of what you would like to do?
I’m not sure if I understand comment #4, but you can certainly control which view you would like to sketch from. If you have a datum plane or even a surface highlighted before you select the extrude command, for example, Creo will automatically orientate the model for you, perhaps to an undesired view. Make sure nothing in the model is highlighted, and you can control it with the placement tab then define the view. I find myself often overlooking this, as I will have something highlighted and the model will flip to a view that I didn’t want when performing certain operations. As much experience you have from the Pro|Engineer days, I think you are probably aware of how to define a sketch placement, but Creo has the automatic function.
I don't know how to solve this issue. The picture on the left is what I see in Pro/E and the one on the right is what I'm suppose to see.I'm using the decal feature to put an image of a sticker on the surface of a part. I works well until I do a save of after a couple of rotations. The image of my sticker become white triangles. Is anybody can help me with that issue.Thanks
Davor,Who invented the first splash screen?
If you want to warp one half, then the other half, you will have to make two separate part halves and place them in an assembly. If you extrude one half, then extrude the other half all as one part, you encounter the problem you just described.
The bottom line is, it currently does not exist.
Good day Gents,This is a pretty popular idea within the community See your vote when viewing someone else's "stuff"I have posted in on Jive's community https://community.jivesoftware.com/ideas/6746 and it has only been voted on 25 times.If this is a feature you want, I encourage you to go there and vote as well as share this with others who would find it helpful.Best,Toby
Before I submit a product idea, I was wondering if there was an existing way to notify users of the Community if the attached files are student or commercial. I would like to see a way to notify users if they are going to upload a student file or a commercial file to let the readers know in advance of what kind of file it is. So many times I have downloaded a file to work on and found out it was a student version of Creo, a file that cannot be opened in a commercial version.
Here's why you would not want to make this with Warp. Notice how the washer twists, and I had to make two halves and place them in an assembly. And it doesn't mate very well on the opposite end.
I rather have them do one more step than for me to ask them if it is a student version file and they have already posted it in the commercial forum. Now, they will have to post it again in the academic forum, another step.
Whoever programs the Community web site would know the best approach.
I never stated Jive notifies automatically. I stated that there would have to be a pop-up window when attaching files, and that pop-up window would have functionality to notify readers if the file is student or commercial.
Pushing the thought leadership envelope to actually executing on it....kudos to Elekta!“The relationship with ServiceMax and PTC has allowed Elekta to be at the forefront of the new breed of manufacturers becoming more and more service oriented. With the field engineers using Connected Field Service, the convenient access to useful service information results in a more trained, educated, and valuable workforce.” Thurman Keene, Director, Strategic Alliance, ServiceMax.
Did this post answer your question?
I just don't see "user education" preventing the uploading of commercial files in the Creo forums. If all of the student files would be uploaded in the Academic Program, then yes, that would work fine. But everyone who post questions with student files don't always go to the Academic Program. So if Jive would tell the users that are about to attached students files (or academic files) to move the discussion to the Academic Program, that would be great. But there is no warning in place for that. So what I try to remember before I respond to an attached file, I ask the author if it is a student version file, and if it is, then that author has to start another post in the Academic Program to receive assistance. And I'm not talking about just a few files, there have been a lot of student files posted outside of the academic forum.
Hi Senna, See if the attached discussion will help you, as I had raised the same question. Solved: Re: Creo Simulation 2.0 M050 - Inertia Relief - PTC Community
Hi all, and Good.Weeks ago the company GIA (Switzerland - Partner PTC) we show as novelty a software of optimization named CAESS.In the new version Creo Parametric 4.0 there are integrated new functionalities about structures for 3D Printer.CAESS is a real time optimization software integrated in Creo, similar to BMX module of Creo Parametric, but not we provide Parameter and Calculation variables.In the next Link video, will we show the tools of Simulate & CAESS & Creo 4.0GIA Topologieoptimierung mit ProTOpCI von CAESS - YouTubeI hope enjoy... 😉Br,Gorka GarciaIntegral Innovations Solutions
Even though you have asked the user to identify the file type before uploading, it just doesn't work very well. When attaching a file, there needs to be a pop-up for the user to mark the file type, and as David pointed out, even the software version. A lot of questions are posted under Creo, and not in the academic forum, which are still student versions of Creo.
Good day gentlemen,We listened to feedback from LiveWorx and would like our next event to have content that covers industry themes and ideas that are important to you. I have asked for input from the Creo Champions; now I would like to open up the discussion to all of you. Happy to hear from the Creo gents again too 🙂Certainly there will be product-specific discussions, but we are interested in learning about specific topics and industries - what would you like to discuss?Are these topics and industries relevant? What are your business interests and challenges?By TopicAnalytics & Big DataAR/VRAugmented RealityChange ManagementCloudConnected Field ServiceConnectiityData ManagementDigital FactoryEnterprise ReadyGlobal TrendsIoT & Smart ProductsIT InfrastructurePredictive ServiceProduct DesignRequirements ManagementRoboticsSecuritySMB Business3D PrintingSystems EngineeringBy IndustryAerospace & DefenseFinancial ServicesHealthcareManufacturingMedical DevicesR
ThingWorx Network FX Partner Newsletter: October
Hi everyone,Is there any alternative ports I could use to configure a development instance of Thingworx? This is because I'm sharing my VM with other processes that already publishing through the ports 80 and 8080.Thanks on advance.
Refer to Product Calendar Creo 4.0 ship date is changed to December 15, 2016.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.