Recently active
Best practices for fasteners:http://support.ptc.com/help/creo/creo_sim/usascii/#page/sim%2Fsimulate%2Fbestpractice%2Fbest_practice_fasteners.html%23
There is a discussion on the Creo community about the new selection method in Creo Parametric 4.0. (Creo 4.0 - component selection) Taking to tech support is fine but it would be really helpful to get the product manager's input on this discussion. In the past it was frowned upon to directly tag the different product managers (and often times they wouldn't reply anyway), but it seems like they would understand the thinking behind the change much better than tech support would. What is the "right way" to pull a product manager into a discussion like this? On a similar note, is there a list somewhere of each of the product managers and their specific areas of responsibility? Thanks.
I know that. But it's not in Creo 3 and previous releases.
Federico,I have attached an old document that depicts why springs are added, and this may be viewed on Pages 9 and 10. Creo has made a lot of improvements since this documents was released, but the concept about the springs has not changed. If you're interested in the tensile load of the fastener, you will want to stay way from this method. Creo now how "Account for Stiffness", and you don't have to make the dual runs as shown in this document.
IBM announces end of support for IBM i 7.1 April 30, 2018Software withdrawal and support discontinuance: IBM i 7.1 selected programs and services - Replacements available
ThingWorx Product Management created a series of technical recordings on the new ThingWorx 7.4 capabilities. This document is a list of questions from others who previewed the recordings. If you have additional questions, please submit them to TWXPartnerSuccessTeam@ptc.com and we will get them directed to the right Product Manager.
The OS is up-to-date. Our internet security department sent me an email this past week stating the fix was in. Great. So I tried to install Creo 4 M010, and I still get the intrusion block in McAfee (blocking creosvcs_64.exe). But wait. There's more. Now McAfee is blocking the setup.exe for the Help Files (below image), but is doesn't block setup.exe for Parametric/Simulate. Now figure that one out. But wait. There's still more. DoD policy has blocked the permissions to disable McAfee, and I am the administrator on this PC.
ThingWorx is please to announce the release of ThingWorx 7.4! Highlights of the release includes: Source Integration: Improved integration framework making it easy to connect with external systems, including a standard Windchill connector, to retrieve data on demand. Industrial Connectivity: New Industrial Gateway and Discover navigation tool simplifying the mapping of tags to properties, including performance enhancements for data updates. Edge/CSDK: Build process improvements, Subscribed Property Manager (SPM) enhancements, asynchronous service requests and TLS updates to increase developer productivity, improve application performance and strengthen security. AWS IoT Connector: The latest version 1.2 of the Connector allows customers to more fully leverage their investment in AWS IoT. It features improved deployment automation via CloudFormation and automatic extension installation, ThingWorx Edge JavaScript SDK for use with the Connector with support for properties, services and e
ThingWorx 7.4 Release - Engage video describes the new capabilities including widgets like Advanced Grid or the Tree Grid. Use the following link to download the entireThingWorx 7.4 Technical Training for Partners presentation.
ThingWorx 7.4 Release - Synthesize video describes the new capabilities including updates on Analytics. Use the following link to download the entireThingWorx 7.4 Technical Training for Partners presentation.
ThingWorx 7.4 Release - Administer and Manage video describes the new capabilities including updates on Security, Licensing and Integral Installer. Use the following link to download the entireThingWorx 7.4 Technical Training for Partners presentation.
ThingWorx 7.4 Release - Source video describes the new capabilities including updates on Integration, MS SQL Server, Industrial Connectivity, Edge SDK and C SDK. Use the following link to download the entireThingWorx 7.4 Technical Training for Partners presentation.
ThingWorx 7.4 Release - Contextualize video describes the new capabilities of the new Composer (NextGen Composer). Use the following link to download the entire ThingWorx 7.4 Technical Training for Partners presentation.
This technical presentation provides an overview on the new capabilities in the ThingWorx 7.4 Release.This includes new features for: Contextualize (NextGen Composer) Source Administer and Manage Synthesize Engage
Take a screenshot of the image you want to sketch over, then insert it, as shown below. After inserting, us the Fit function to scale the image, providing there are dimensions on the image. But I guess you may already figured this out.
Based on Case https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13395000Topic 6Problem:The MS Project Integration can provide an HTML URL to MS Project for Integrity items.Idea:Instead of an HTML link this should be a Integrity client link to open a window in the Integrity client:url:integrity://server...
Are you trying to insert or import an image into sketch mode for drawing purposes?
Hi,Can I download/extract a table with the current forecasting method per material for a selected location?Thx!
Based on case https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13639304(Issue 277701)See also article https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS260520Problem:When viewing the History of a file with an extensive tree you can only move along the branches by moving the sliders, or the mouse scroll but only for the vertical axisIdea:We would like to have a good way to show history more efficient. The idea is to have a kind of hand tool available (like it is implemented inside PDF) where you can move the needed section very easily up and down, from one side to the other.
I have questions about ThingWorx Analytics Builder. I don't know what the red circles mean in Signal View below. Can anyone explain what it means?I don't particularly understand the meaning of the gray vertical bar in the green horizontal bar.Thank you.
Based on Case https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13639079(Issue 253177)Add possibility to see where a Query is referenced.Reason: When trying to delete a referenced query, this is not possible. Also it is not possible to find out where the query is being referenced in order to delete the corresponding object (Chart etc.)Workarounds mentioned in https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS83599do not work as this needs the help of e.g. an admin or do not deliver the needed data (where is my Query used / referenced)
Bases on Case http://www.ptc.com/appserver/cs/view/case.jsp?lang=de&n=13639414(Issue 277220)Problem:With ILM 11.0 a new option "Label Unchanged Subprojects" was introduced inside the checkpoint dialog.By testing we found the following behavior, when enabling "Label Unchange Subprojects"./Alpha/project.pj/Alpha/subA/project.pj (not changed since last checkpoint 1.3)/Alpha/subB/project.pj (configured to checkpoint 1.5)subA was not checkpointed, instead the existing checkpoint 1.3 was usedThe label was added to both sub-projects checkpoints subA (1.3) and subB (1.5)We expected the behavior and wish the following behavior:The label is added only to subA (1.3) as this is the only unchanged sub-project.The label is not added to subB, because this sub-projects is configured to build.Remark: We interpret sub-projects configured to build not as Unchanged Subprojects, but as Reused Subprojects.Reason:Many projects at Conti have their individual development and also do reuse generic software
HI .. Looking tor learn forecasting process of xelus parts planning.. Can anyone help?
Based on Case https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13637931(Issue 256181)In the views Manage Queries, Reports, Dashboards, Charts when selecting a Q,R,D or C the selection shall be stored in an Environment Variable.See also article:https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS85618
You don't get this for solid fasteners.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.