Recently active
Based on PTC Case https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13637917(Issue 277237) Feature "View my Locks" in Integrity Manager requested. This function shall show all Documents that have been locked by me.
Based on Case https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13638007(Issue 253192)Allow BU/user specifically and configurably to show selected document attributes (in addition to the Document ID, e.g. Document Title) in requirement.Alternative: Add Query Filter to search for properties of document a content item is located in.Reason: In Integrity, there is no direct link from Content to Document.Therefore it is impossible to create Queries, Charts and Dashboards based on Content Items that are located in documents with certain properties.Example: Query showing all requirements in documents of type SRS2.
Marc,This can be controlled with a config option. Go to your configuration editor and add measure_dec_places and enter a value of 2.
You want to simulate the deflection of the hinge, and not the stress? It appears the hinge consists of two bronze colored components, fasteners (2 or 4), and the two ligaments that are part of the door. I cannot distinguish if the fasteners go through the entire assembly, or if they stop within the bronze plate. It would be nice if you could show a cross-section of the hinge with the fasteners. Is there a particular area of the hinge that would be the region of interest? That would certainly narrow it down. Do you want deflection results display as a fringe plot, or a graph?
Good point. Sounds like a discrepancy in the code.
Based upon your crashes, I'm wondering what kind of hardware you're running, especially the graphics? You should not be having a crash by showing a datum on a drawing.
Are you trying to make letters with the sketching tool or are you trying to make them in drawing mode?
I don't draw schematics, but try different font settings in the PDF Export Settings. The "Stroke Non TrueType Fonts" is activated with a config option.
If your company will issue reprimands for using the mirror feature, and if it's a written internal policy, then I would not use it. It's hard to believe a company would lower itself to such a standard as that. The mirror tool is a great feature to have, especially for manufacturing right-hand (RH) and left-hand (LH) aircraft components. Many times I have received a LH component, the RH needs to be manufactured. You bet I'm going to use the mirror tool, instead of trying to re-create all that geometry.If you're very proficient in mirroring, perhaps you could make a presentation on some of the models and show a cost-savings to management. Maybe they will allow mirroring, after all, they want to see savings ($$$$$). Right?
I do not have a student version of Creo, but Creo Parametric comes with Creo Simulate Lite at no extra charge, and I think this is what comes with the student version. This found under the model setup (commercial version). Once you select OK, the process guide will activate. If you have a student version, there is an academic support group in the community.
We have minimum order by quantity in 11.3 but some vendors have a minimum order value is this something other users have come across?Has anyone developed a custom solution to this?
here are the slides from this webinar - the recording is also available
We have an endpoint we wish to uninstall PTC Implementer from. How do we do so?
CP0058603:Currently if two users edit the same item at the same time then the first change is stored and the second person gets a conflict shown when trying to store this. The conflict resolution currently only offers to accept one of the changes and disregards the other. Often the comments are related to different topics and hence both changes are valid. Therefore a third option allowing to store/ accept both changes would be helpful.
If you have a lot of sandboxes / projects view open the reordering is quite difficult and could be improved.We have users (source coordinators) with 50+ open tabs and it seems that you can move a tab only one up or above.Tab list from one of our users:It seems that it is not possible to move a sandbox tab from e.g. the bottom to the beginning in one go.KB CVS Action Item: 1540462
When using customizable Viewsets, the users can make changes locally to their Viewsets.Administrative changes to Viewsets are pushed out and users need to close their Viewset and re-import from server.There is currently no way of keeping the user settings when re-importing the Viewset from the server.
Allow administrators the ability to publish a default set of view options - preferences along with a viewset in IntegrityViewSet Customization not PreservedView options are not saved by viewsets for clientsView options are saved per client in the .rc file
BOM Table Editor in Excel should support non-english office languages
With PTC Integrity 10.9 the Multi-Row-Edit was introduced which is a highly expected feature for our users.With enabled Multi-Row-Edit we experienced that editing a document in MS Word doesn't refresh your local document View after you have published the document back.Since the new client already has the capability to prevent opening a document twice in Multi-Row-Edit (==> client getting smarter) it would be great if the client notices that the document is already opened by the user and does a refresh of it.
We are proud to announce our main keynote for LiveWorx 2017, May 22 - 25, in Boston.Nicholas Thompson, Editor-In-Chief of "Wired Magazine" will lead a fireside like chat with Aneesh Chopra, Chief Technology Office of the United States (2009 - 2012).As Editor-In-Chief of Wired, Nicholas works at the forefront of digital innovation - championing tech's role in making the world a better place, what better person to engage with Aneesh and learn more about his time assisting President Barack Obama in efforts on the promotion of technological innovation in the country, and the importance of science and technology. A topic both speakers are passionate about. These prestigious guests of LiveWorx are sure to get the transformation and innovation juices flowing and pique the interest of our broad audience.The learning doesn't stop there. There is still time to add trainings to your registrations by logging back in to your registration profile and "Add Registration Items" to learn more abou
Could you mark his response as correct? Thanks.
Have you tried a surface analysis to see if the surface is completely flat around the holes?
Have you tried it in different version and date code?
I have never seen this type of problem while using the advanced fastener tool.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.