Recently active
Hello to one and all,It has been a while I know, but I couldn´t let the opportunity of the Royal Wedding tomorrow go by without comment. As many of you may know, I am an Irish lass living in Germany and even though quite a bit away from the UK we are still flooded, in the best possible way, with reports, updates, comments, concerns and what have you, about Kate and William tieing the knot.You are probably thinking, what the heck has that got to do with anything. But thinking around a few corners I believe that this royal wedding is a super analogy for the royal link we have been working with for even longer. I am referring to the magical relationship between PLM and ERP.How many articles, papers, discussions and blog posts have been released on the topic. Probably there has been as much attention to PLM and ERP throughout the globe as there will be people watching Kate walk up the aisle.From the sea of information available, I have chosen two new papers to share with you today that I b
10. AV ENGINEERING AWARDSNEZAPOMNĚLI JSTE SE PŘIHLÁSIT?NEVÁHEJTE A ZAPOJTE SE I VY. DEJTE VĚDĚT SVĚTU O SOBĚ A SVÝCH PROJEKTECH.Tradiční soutěž uživatelů konstrukčního systému Creo (dříve Pro/ENGINEER), PLM systému Windchill, technického kalkulátoru Mathcad a systému pro tvorbu technických publikací Arbortext.NEVÁHEJTE A ZAPOJTE SE I VY. DEJTE VĚDĚT SVĚTU O SOBĚ A VAŠICH PROJEKTECH.Kdo se může soutěže zúčastnit?Soutěže se může zúčastnit každý, kdo legálně používá ke své práci/studiu/výuce/vědecké činnosti některý ze software od výrobce PTC.Kde se nachází detailní informace k soutěži?Detailní informace k soutěži jsou uveřejňovány a průběžně aktualizovány na www.aveng.czJak se do soutěže přihlásit?Tradičně přes přihlašovací formulář uveřejněném na http://www.aveng.cz/awards/formular-1-krok.aspxO co letos hrajeme?Vaše osobní propagace a propagace vašich výrobků a firem.Každý účastník soutěže obdrží unikátní tričko AV AWARDS 2011.Ceny pro vítěze:1. Místo: Notebook HP2. Místo: GPS navigace
It’s obvious the first time you open it that Windchill 10.0 looks a lot different. This article will go behind the scenes to help understand why the interface has been changed and what the major differences are.I spoke to Michael Hayek, product management director at PTC, to get a better understanding of how the new Windchill user interface was developed. PTC spent a considerable amount of time gathering input from Windchill users about what they like and do not like about the existing Windchill interface.A few themes stood out. Users said that they used the homepage—and especially the search feature—frequently and would like it be quicker and easier to use. On the other hand, they said they used only a small subset of the navigation portion of the interface and the rest sometimes got in their way. Some of the more experienced users mentioned that they repeated the same tasks often and would love to have a way to do this more efficiently.Some users compared previous Windchill interface
Do you need create a custom 3D text offeset from the surface...... and do not know how to do it?See this short video:Regards,Vladimir
4 Planets. Description (3 planets) see please here Unable to play video. Please try again later.(view in My Videos)
Hello everyone,It’s about time I come up with a new article – it’s been a while since my last post.Today, I would like to talk about creating CAD tutorials - again. See it as a follow-up post to my interview with Steve Meyers, one of the contributors to the LearningExchange. Actually, the inspiration for today’s post came even before we launched LearningExchange and hit me when checking my Twitter feed a few months ago...I noticed a Tweet by Aaron Dietz who asked a question about Creo Elements/Direct Modeling PE. We talked a bit and I asked him if he would be up for a quick interview for this blog. Aaron writes CAD (and other technical) tutorials for high school students – definitely an interesting topic, I thought. If you agree, please read on and hear what Aaron had to say!BG: I understand you create tutorials for schools, i.e. very young learners?Aaron Dietz: I write and design instructional materials for Giant Campus, an online high school and course provider. Currently, I'm workin
Proč si vybrali Creo Elements/Pro (dříve Pro/ENGINEER) oproti NX nebo Catii, když používají AutoCAD, Kompas a SolidWorks.http://isicad.net/articles.php?article_num=14348
photo © 2010 Quinn Dombrowski | more info (via: Wylio)The written word can be tricky sometimes. Interpreting it can be even more tricky. We lose tone, nuance, pause, stress, and of course sarcasm and subtlety. I’m just as guilty as the next person is of misinterpreting something that someone sent to me. Sometimes I’m left scratching my head, thinking “Why did they say that?” This is potentially dangerous if it puts someone on the defensive, or if they construe it as an attack.We all like to think that our tone and true meaning come across exactly as planned. But that’s not always true. Below is a favorite example of mine that illustrates this point very well. I can’t claim credit for this – I don’t even know who the original author is, but I Googled the phrase and got it here. In any event, thanks to whoever wrote this – a tip o’ the hat to you.Keep this in mind when interacting with fellow Planet PTC Community members. Often
Do you need a 3D Center Line (3D Datum Axis) on a Circular Shape or a General shape? Here are a few steps - my tips tricks Circular Shape Video Link : 1879 General Shape Video Link : 1883
My 7-year-old son is always talking about what he wants to be when he grows up. “I want to build spaceships,” he tells me. So when I returned recently from a trip to the National Space Symposium in Colorado Springs with piles of space related swag and a suitcase full of booklets and brochures, he was overjoyed. “I’m taking these to school to show my class what I’m going to do when I grow up,” he said. I hope he keeps up the momentum.This year’s National Space Symposium focused heavily on how the US needs to step up its game in science, technology, engineering and math (STEM) education to ensure a competitive edge in space innovation. I sat in on a panel discussion lead by well-known industry players—including Raytheon and Booz Allen Hamilton—to hear how they are investing in future engineers.“We take a multipronged approach to reaching kids,” said Lynn Mortensen, VP of Engineering at Raytheon Intelligence and Information Systems. “We are broadly involved in a variety of programs like M
I recently attended the 27th National Space Symposium in Colorado Springs. As I sat through a recording of the Rice Stadium moon speech given by JFK back in 1962 and watched children clamber for astronaut Joe Engle’s autograph, I reflected on those glory days when Americans had the momentum and the luxury to “do things not because they are easy, but because they are hard.”Last Tuesday marked the 50th anniversary of Yuri Gagarin's flight as the first man in space, and the 30th anniversary of the first Space Shuttle mission—a feat that put the United States back on the map in human spaceflight. But the retiring of the Space Shuttle in mid-2011 and the outsourcing of crew transportation to and from the International Space Station has left many questioning where the US goes (or does not go) from here.Back in the 1960s, beating the Soviets to the moon was a winning mantra. But now, with a floundering US economy, it’s harder to sell a vastly over-budget space program to the public, that, by
This video animates the motions of three mutually-gravitating Newtonian particles with mass units as follows: m1=20 (black), m2=2 (red), and m3=0.1 (blue). See the PlanetPTC Mathcad discussion, "Nonlinear Dynamics Using Mathcad Prime 1.0" at http://communities.ptc.com/message/162082#162082 Unable to play video. Please try again later.(view in My Videos)
See too http://communities.ptc.com/videos/1867 and http://communities.ptc.com/videos/1356 DownLoad Mathcad-file Unable to play video. Please try again later.(view in My Videos)
Short video where you can see a few simple steps how you can create 3D Driving Dimension: Video Link : 1741
photo © 2008 Steve | more info (via: Wylio)Recently, The Boy Scouts of America introduced a new merit badge: robotics. How cool!“To earn the badge, scouts must, among other robot-related requirements (PDF): design, build, program, and test a robot; demonstrate the bot and share their engineering notes; attend a robotics competition or do research on robotics contests; and explain how robots are used today. For many young scouts, that probably won't be hard, given that they're growing up in a world where bots are being used to do everything from perform surgery and assist in disaster rescue to clean floors, mow lawns, and massage aching backs.”*I started in Cub Scouts, but never finished into Boy Scouts. I liked what the program and organization offered. I think offering a robotics badge is a clear sign of the times. The organization is reacting to what young men will be facing in this 2011-and-beyond era My favorite part about the requirements for the badg
Happy Monday!I had a rough start into the week – I accidentally slept in and didn't hear the alarm clock.Reason: jetlag.I spent the past week to meet with my team at the PTC Corporate Headquarters in Needham. As you know, I am based in Germany, while the rest of my team and my manager are in the US. Communication is not a problem – often it even helps that I am located in Europe. Being in-between time zones, I can easily catch our folks in Asia before they leave their offices after work, and reserve my own afternoons for calls with the US.Still, being so far away sometimes requires some patience on my end as well as on the rest of the team. Discussing some things over the phone is certainly harder than sitting in a meeting room face-to-face. Also, I cannot just swing by someone’s cube to ask a quick question. This puts more emphasis on email, which again can be challenging – you don’t want to send too many emails and be inefficient - you need to make sure to hit the right tone, y
A look at the newly added feeature in Arbortext Publishing Engine 6.0, publishing rules, with PTC product manager Susan Fort Unable to play video. Please try again later.(view in My Videos)
A walk through what's new in Arbortext Editor 6.0 with PTC's product manager, Pushpinder Toor. (view in My Videos)
Mike Lockwood has started a thread on PTCUser about this. For those presenters who have been working hard on their presentations and were planning on doing a live demostration, it is a bit late to be changing the rules on them. He just learned that there will be no internet connection provided for presenters at the 2011 user group meeting (Las Vegas). Just amazing. This is a failure of the event coordinator. It should be corrected right away or a notice should go out as to why they were not able to provide this. There is only so much you can do with PowerPoint slides.Here is the link to Mike's thread (PTCUser login required): http://portal.ptcuser.org/p/fo/st/post=96904&anc=p96904#p96904
Two parts of a few simple steps how you can create an illustrations from 2D CAD data.(Vector illustration of baffle in Arbortext IsoDraw Foundation from 2D drawing and reference pictures) Part 1 Part 2
It’s no secret that I like lists… checklists to be more precise.So here’s the story.We marketers are tasked with organizing events a lot – seminars, roadshows, workshops, launch events, webcasts, demos – there are a ton of different formats and occasions. What they all have in common, though, is that they are expected to resonate with the target audience – and provide enough value for people to make them want to attend.Everyone has different requirements, and having dealt with the subject for many years in my marketing career, I have heard many different opinions from people. Usually, marketers in all kinds of companies like to run a quick survey with the users after an event and ask for their rating. While one person may have liked the information provided, the other one may be disappointed because he had different expectations – the answers can vary with every user.Also, very often people do not fill out those surveys as they have no time for this. And I must admit – I am not willing
Ok, I have to admit. This has nothing to do with Creo or PDMLink. Maybe there are a few automotive guys(gals) who can help explain this to me. So, my Honda Odyssey radio stops working. The dealer wanted $500 to remove and repair it. $1000 for a brand new one. A local car stereo place will remove it for $75. Sure, enough as we thought, someone dropped some change in it. It sounded like my boy's piggie bank. They seemed a bit old for shoving coins in the tape player (ok, its a 2004), but as my father would say, "They didn't grow legs and walk in there by themselves." My six year old protested, "I don't put change in, I only take it from the coin tray." Either way, this is not the point, I digress...So, as I drive home in silence, staring at the gaping hole in my dash, it hits me. Does it really cost $1000 for a 7 year old car stereo? Are there significant challenges in designing and building a radio with a CD player. And look at the size? My other car is brand new and I have
Or: Creating the perfect CAD tutorial – Interview with Steve Meyers, PTCHi everyone,You already know that I am a big fan of our latest PTC University offering, the LearningExchange – at least if you have read my recent post about it...Over the past few weeks, I have been sharing many of these tutorials with users outside the PTC ecosystem, but I also browse through LearningExchange a lot to educate myself. I am already familiar with the names of our main contributors and one name has been burned into my memory right away: Steve Meyers.His tutorials are simply fun to watch and especially for someone like me, with less technical background, this is important. If I get overwhelmed with tech terminology in the first minute, this can be a real barrier and prevent me from learning.As PTC is a pretty big organization and we are living on different continents, I have never met Steve in person. However, I wanted to at least ‘e-meet’ him and thus asked him a couple of questions...Here’s my inter
Nová verze Creo Elements/Pro EFX 7.0 F000 je k dispozici uživatelům s aktivní službou maintenance.Vylepšení se dotkly:Uživatelem definované prvky (UDF) v EFXVkládání uživatelskýchprojektů a spojek ze souboruKnihovny s template pro vlastní modelyRozšířená knihovna deseknové typy napojení profilůVylepšená automatizace tvorby výkresů (pohledy a kóty)Vylepšený import SDNF
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.