Recently active
here is a link to the PTC support site and an online version of the SPM version 11.3 release notesSPM version 11.3 Release Notes
I have installed Thingworx and Thingworx Analytics Server, and ready to create a prediction model with Analytics Builder in ThingWorx.I want to configure a ThingPredictor for real-time prediction, but I do not know how.Please give me a detailed guide on how to configure ThingPredictor.Regards.
Hello, this might be a special german issue and I would like to now how you handle this. When using the german keyboard on the numeric block there is the comma instead of the point. Right now we have a special software that turns the comma into a point inside of Creo. With Creo 4.0 this tool does not work anymore. To switch the keyboard from german/Germany to german/Swiss was not a solution because some other keys will also change. Do you have the same issue or maybe a solution for Creo 4.0?
I have been working on this since last week and almost completed my work and then tried to save file at the end of day and seems didn't save properly and the contents of the file were missing. There's no recovery file. I just dont know what to do. I would really appreciate if anyone can help me with this. Thanks
@Jaime_Lee, please resolve annoying "thing" shown on picture. https://community.ptc.com/t5/Creo-Modeling-Questions/Creo-3-0-not-starting-after-adding-custom-starttools/m-p/485868#M112644 My picture belongs to IE11. I guess that the problem is reproducible in FF and Chrome, too.
Key Functional Highlights ThingWorx 8.1 covers the following areas of the product portfolio: ThingWorx Analytics, ThingWorx Utilities and ThingWorx Foundation which includes Core, Connection Server and Edge capabilities. Highlights of the release include: ThingWorx Foundation Next Generation Composer: Embedded Mashup Builder enables codeless development of web visualization. New ability to manage and push configurations for KEPServerEX Notifications: Create SMS and Email notifications natively in Next Generation Composer Support for localized and dynamic content with tokens Protocol Adapter Toolkit: Encrypted communication between edge devices and the Connector over HTTPS or WSS. Encrypted communication between the Connector and ThingWorx Core (WSS). Ability to define a mapping of outbound messages from ThingWorx Core using a Codec to an edge-bound message. Authentication of edge devices 3rd Party Platform Connectivity: Azure IoT Connector v2
This forecast method creates the ability to create a time phased forecast of child parts based on the forecast of parent parts.This forecasting method has many applications such as multi-indenture forecasting and optimization, kit forecasting or maintenance forecasting.This feature is available with SPM 11.3 release
Functional Overview:SPM Forecasting feature which will allow review of forecast prior to promoting to production.Ability of use the recommended forecast in Inventory Optimization.Planners can approve/disapprove a recommended forecast and based on final approval, the approved forecast can move to production. ApplicationAll Industries where multiple groups collaborate on forecast approval process.Expensive parts where planners need to review before approving the plan for production.Review reasons can be created for forecasting exceptions based on recommended forecast. Benefits:Less chance of erroneous data to get promoted to production.Strategic analysis of forecast before getting promoted.Order plan can keep running on Production forecast while the recommended forecast is being reviewed.Work Queue filtered by review reasons based on recommended forecast.This feature is available with SPM 11.3 release.
These features were release in SPM 11.3 April 2017Functional Overview: This ppt previews SPM 11.3 iPWS, Work Queue planner workflow improvements.Application: All customers using iPWS and WorkQueue.Benefits: Improves usability and planner workflow.
Functional Overview: This ppt previews 11.3 improved and newly added Order Plan Review Reasons.Application: All customers using Order Plan functionality.Benefits: Improves planner workflow.
This feature was release in SPM 11.3 April 2017Functional Overview: Recall excess material from the allowed source locations to the destination location regardless of need at the destination. Move excess parts time to time from various locations and consolidate at a designated location.Application All industries, where excess parts' consumption is not expected at particular location(s) and need to be recalled at designated location.Benefits: Reduce procurement recommendations at central location in Time Phased-Trigger Point or Time Phased-Time Phased-Trigger Point models (when time phased balancing is not used). This may not necessarily reduce today’s procurement, but will reduce procurement over the horizon. Reduce the load on balancing and reduce the need to do time phased balancing at forward locations and use excess recall for inventory that cannot be used at field locations in reasonable
Carriage returns do not work in rich text mode, and when the user tries to switch to HTML to create breaks, all content that has been typed is deleted. Please add carriage return functionality and save content when switching modes.
I have form login's form that is customized with some background.Upon successful login, is it possible to pass a value to a session variable?Is there any such parameter that can be used in the form while trying to login?
We currently have two global distribution lists which can only be owned by one person TS-NA-AdvisoryBoard = Board Members Owner: Glenn Williams TS-NA-AdvisoryMembers = Members Owner: Jennifer Sledz Distribution List - How to manager members
See this Discussion on instruction on How to Register on PTC Community 1) Employee goes to PTC Community and submits their normal PTC credentials (laptop login) 2) Complete screen name 3) Review the Terms and Conditions of being on the Community THAT'S ALL FOLKS!!...you are now a general user! If you need special group or further access, contact community@ptc.com mailbox with group name/group leader
Hi,before the reorganisation here there was a very helpfull windchill reporting resource page located here.Resource for reporting - PTC CommunityThis seems now to be located here:https://community.ptc.com/t5/Reporting/Resource-for-reporting/gpm-p/448738but with restricted access.How can I get access again?
Be sure to follow us in our new LiveWorx 2018 Space in the Community. We already have information on SUPER early bird rates that will expire soon as well as significantly discounted hotel prices. More information will be posted as it becomes available. Stay in the know and follow us today to stay on top of important information leading up to the conference! Want to learn more about LiveWorx 2018? Here are some quick links: Registration Packages Call for Papers LiveWorx Blog General Conference Information
With the change over to Module Works and the loss of Vericut, no longer does the material removal simulation open in a second window allowing the simulation to run while still working in a ProE/Creo session. Our output has been drastically reduced as some of our simulations take several hours to complete. A support case was opened to determine if this was somehow even possible. Support stated this is not possible and to submit a product idea to see if the community thought it was valuable enough. The idea is to allow a simultaneous or concurrent session of Creo so design can continue while Moduleworks is running the simulation in a seperate process. Hopefully this is something that others could benefit from as well so vote early and often.
General concern about the forums In my opinion, things are going south with the forums. People are not posting in the correct forums People are using the blog as a forum If I report these issues, no response from PTC The level of PTC involvement is at an all time low The way the forums/blogs/etc. are arranged is still a mess It's time to step up our game!
Disaggregation/Aggregation (Forecasting) Product BOM Modelling Enhancements
Hi to everyone,I've these problems witjh Thingwatcher - Data Anomaly Detection TW 8.0.: "2Anomaly Alert [Tractor_1-speed-speedAnomaly] Failed when in [CALIBRATING] State. Thingwatcher Error Code :: [WAT1003E] Message :: Data collection exception. {Throwable=[ThingWatcherDataCollectionException: The data collection limit of 3 has been exceeded. There are too many long gaps in the data.}]"and"Returning a FAILED state for TimedValue [timestamp=1504780070919, value=50.17158690012162]. ThingWatcherMessage [timestamp=2017-09-07T12:27:50.934, severity=ERROR, state=ThingWatcherInternalState [internal=COLLECTING_RAW_DATA, external=CALIBRATING], messageCode=WAT1003E, messageText=Data collection exception. {Throwable=[ThingWatcherDataCollectionException: The data collection limit of 3 has been exceeded. There are too many long gaps in the data.}]]"I'm using a Tractor test to simulate RemoteThing but on Alert page:Can someone help me?Thank's a lot,Luigi
Today we cannot save private messages from the forum to clean out our inbox and sent messages.This needs to be fixed so that we can save out our correspondense.I do not know if this is an option in the current forum, but should be possible in any forum upgrades.I am at 80% of 100 messages. Any suggestions for the meantime?
@Tmetcalf, is it possible to merge two current Creo areas (Creo Modeling Questions, Additional Creo Questions) into one named Creo Questions ? It does not make any sense to have two areas.
Hi, when i'm creating a model in ThingWorx Analytics builder mashup uploading json and csv files i see this on the mashup:but meanwhile this error on the application manager:THingWorx 8.0 - Error creating a model: Internal error failed to delete existing file before write (current json path)I attached the application log.Thank youMarco
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.