Recently active
Mark,You stated concerning contact:For multi-body contact with mis-matched surfaces, Split Surface can be enabled (shown below) to split the surfaces in the region of interest. I think this discussion is about Creo's fastener tool, which does not create a solid fastener. I've used the surface region creation technique for solid bolts, with solid heads and nuts. But you could still split the surfaces with the interface tool. PTC developed the Split Surface function in the interface tool to save time in creating matching surface regions.
Guilherme,Here's an explanation on what happens when you enable fix seperation. Notice the deformation plot.
Did it work?
Hier ein kleiner Hinweis zu aktuellen Schulungen, die in den nächsten Wochen (Mai/Juni) stattfinden werden. Alle Schulungen finden in PTC University-Trainingscentern statt und sind bereits bestätigt, d.h. sie finden in jedem Fall statt. Wir haben jedoch für alle Termine noch ein paar Plätze frei. Dies ist insofern interessant, da auch einige Themen dabei sind, die weniger häufig angeboten werden.19. - 21.Mai: Zeichnungserstellung mit mit PTC Pro/ENGINEER Wildfire 5.019. - 22.Mai: PTC Arbortext IsoDraw 7.2 Foundation mit CADprocess in Sindelfingen (SLM)03.+ 04.Juni: PTC Integrity 10 SCM Basic und Advanced User Training in Sindelfingen (ALM)02. - 06.Juni: Einführung in PTC Creo Parametric 2.0 in Sindelfingen (CAD)17. - 18.Juni: Blechkonstruktion mit PTC Creo Elements/Direct 18.1 in Sindelfingen (CAD)23. - 27.Juni: Einführung in PTC Creo Parametric 2.0 in Ratingen (CAD)Bei Interesse an einer dieser Schulungen (oder jeder anderen), können Sie uns unverbindlich anrufen (+49 89 32106 458) od
Podívejte se na vzhled nového závodního vozu týmu TU Brno Racing pro sezonu 2013/2014.Více informací na www.tubrnoracing.cz
It’s easy to focus on all the benefits of PTC Live Global 2014 training and education sessions and forget all about what you can learn in keynote presentations – and how that can help you back at work.This year’s exciting lineup promises to bring you up to speed on advances in smart, connected products; show you how to take advantage of the Internet of Things to improve the way customers interact with your products; and reveal how PTC’s technologies can help you develop “smarter” products. By sharing what you learn on Monday and Tuesday morning with your manager, you can help keep him or her informed about a topic that’s essential for retaining your organization’s competitive advantage, and share insights from the presenting organizations who are preparing for this shift. You can also become your team’s go-to resource on not just PTC Creo 3.0 and PTC Windchill 10.2 capabilities, but the ThingWorx platform as well.If that’s not enough to convince you, here’s the list of each day’s keyno
Define "low budget".
I think you will want to solve this with the Beam Tool as shown below:
No, not any more for capturing the Publish Monitor Details. Starting with Windchill 9.1 M060, it is possible to capture Publish Monitor details without restarting the Windchill Method Server. Continue reading...
Pirelli FIA Formula 1 Supersoft Tire modeled by Ram GaneshThere are only two weeks left to submit your design into Modeling Boston – The 2014 PTC Live Global Design Contest. Check out the full contest details and submit your entry before May 22nd.Here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:Simulating a Thread with a constraintBy Andrew RyanIrregular polygon-areaBy Gabriel SasModeling an Elbow in Creo Parametric 2.0 (Video tutorial included)By Nisheeth SrivastavaHow to create a model of a wire ropeBy Wasim Sheikh Video Link : 4934 (Worksheets attached)By Valery OchkovCosmetic threads? Hiding threads in hidden line removed view (Updated)By Dale RosemaMost Popular Training Classes at PTC Live Global 2014By Bettina GiemsaOdd even numbersBy Sameer Fares Controlling pipe orientationBy Michael SchubertFeel free to click on any of the links above to discuss, like, rate or reply to any of this weeks' p
Here's the article:
If the model is constructed correctly in Creo Parametric, it will mesh in Creo Simulate. A lot of users don't know how to model for the finite element method. I disagree with your conclusion that Creo Simulate is 10% efficient. I've always been able to mesh my models in Creo Simulate that were created in Creo Parametric.
Here's a good article from an engineer who has to work with both products:https://www.google.com/#q=advantages+of+creo+over+solidworks
Tom gave some good advice on how to do this.You can also create your own csys in the STEP import, save a new STEP with the new csys. When you import the new STEP, you can then save it as a .prt file (Creo native). Then you can add it to an assembly file (.asm), and then you can move it anywhere you want. You can add it csys to csys or make it offset distances.
Can you upload the model?
PTC has recently made a pair of Windchill 10.1 M040 temp patches publicly available that address the following issues:Poor performance using Creo Parametric or Windchill Workgroup Manager when the user has access to hundreds or more Products, Libraries or ProjectsFunctional issues with the Windchill Workgroup Manager communicating with WindchillTake a look at CS141139 - Windchill Workgroup Manager Performance and Functional PatchNote: The 10.1-M040_WWGM_PS_2 patch has been superceeded by the 10.1-M040_WWGM_PS_8 and later 10.1-M040_WWGM_PS_## cummulative patches. See CS133804 or this blog post for additional detail.
Time has flown by while we at PTC have been busy preparing for the event. We’re already heading into May – which means PTC Live Global is only a couple of weeks away!That also means it’s time to take a look at the registrations stats for our PTC University training sessions. At this point, some of the classes and two-hour sessions are already filled up. So I figured it might be good to give you a heads up to help you select sessions if you’re still undecided and then build your personal event agenda.Why are we asking you to pre-register?Of the different types of training we offer, there are three that we highly recommend you register for in advance: The full-day classes on the Sunday and Thursday These are available at a highly discounted rate and you need to register for these and make your payment. These sell out very fast, and if you want to leverage this unique discount on a specific topic, it is advised to book early. These classes only have a few seats left:System Monitorin
Finished spotting the 12 differences between the pictures? OK...That will make it easier for you to spot the only one difference with PTC Creo View Adapters 3.0 M010 and the previous versions as it pertains to the PDF Adapter. To know more, continue reading this post…
Atlas machine render by reberweinAs we head into the final days of April you can't help but feel that spring (and more importantly summer) is right around the corner. And with that I wanted to make sure everyone had a chance to check out the awesome contest our team is running from now until the end of May - Modeling Boston – The 2014 PTC Live Global Design Contest. Check out the full contest details and submit your entry before May 22nd.Here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:Help modeling a rasp with offset teethBy Jeff WickhamSimple Riemann sumBy Larry OrthDid You Know? Creating a Helical Pattern in PTC Creo ParametricBy Thomas McKeownMapped Mesh on FilletBy Paul Hammerstrom Video Link : 4919By 鹏飞 褚 (Pengfei Chu)Sketch to drawingBy Claes JohanssonDid You Know? Integrating Multiple Models into a Single DesignBy Jessica ShaheenSymbolic partial derivative operator in Mathcad Prime 3 - where is
Thanks. That's it.
I'm missing something in this option, as I'm not able to locate radial_pattern_axis_circle. Please look at the image below and see if this is the correct way to add to the detail.dtl file.
Bertil,Glad this worked for you, and welcome to the forum. I had forgotten you were using WF3, so the file is not backwards compatible. At least there was enough information in this discussion so you could replicate the solution.
Here’s an excellent representation from Intel on What happens in an Internet Minute?So, why am I talking about Visual Representations-Internet Minute? That’s because a lot can “visualized” in Windchill in one minute… For example, here’s how to View Representations in Windchill. Continue reading →
Hi Bertil,I made the surface based upon the datum points and trimmed it with the green projection curve using another surface, as you stated. The surface is shown below, and it's bit rough. Also, I attached the model. Were you looking for something more smooth?
In general:Import the points with .pts file.Connect the points with curves.Make surface with curves, boundary blend.Can you upload the points in notepad in XYZ columns and attach it to this discussion?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.