Recently active
James,Look at the attached post and scroll down towards the bottom and see my solution with three figures and the attached file. See if this will help you.http://communities.ptc.com/message/237605#237605
If you're on maintenance with PTC, upgrade to Creo Simulate 3.0. It will be worth it.
Mit der PTC Creo Design Exploration Extension (DEX) können Benutzer schnell und effektiv Konstruktionsalternativen evaluieren und den effektivsten Modellierungsansatz ermitteln.Agenda: Präsentation mit Live-VideosErstellen von Checkpoints im BaugruppenmodusAktivieren und Ändern von CheckpointsVerwalten von Konstruktionsideen im Dateisystem und in WindchillAnwendungsfälle und Nutzen Melden Sie sich noch heute zur Teilnahme an den Live-Produktvorführungen und Q&A mit unseren PTC Creo Experten anTermin: 04. November 2014, 11:00 - 11:30 Uhr.
You have to map to where the tree.cfg is located after the mdl_tree_cfg_file option has been added. If you don't, the settings won't work. See attached image.
Can we see the reflection analysis on the Solidworks fill?
Was your question answered?
Andreas,This is the second post you have on the same subject. The link below is for the same problem:http://communities.ptc.com/message/259957#259957
Without the model, it's difficult to determine the problem. Can you upload the model? I'm sure there will be several people that will assist you, including me. I will be back in my office on Monday, and there are a lot of Simulate users in this Community that will see your post.
In my previous post “Why bother replacing 2D Drawings with 3D Models?” I outlined the need to replace 2D Drawings. In this post, I’d like to discuss the challenges and considerations for adopting a Model Based Enterprise approach. Continue reading on creo.ptc.com
Good morning Gents,Hope you are all having good weeks. Not sure if you saw this thread: if you are attending PTC Live Global and would like to present.Here is a link to the announcement.Best,Toby
Antonius,Do you think it will work using this method from the Learning Exchange?http://learningexchange.ptc.com/tutorial/3465/creating-a-parting-surface-using-fill-loopsI don't have the Mold extension.
Hlasuj prosím pro toto vylepšení v Creo ParametricPro zobrazení obsahu odkazu musíš být přihlášen. (pokud link nefunguje, edituj jej v internetovém prohlížeči)http://communities.ptc.com/ideas/4845Díky
Good to know...thanks.
When I import the STEP file and launch the Style function, I can't create anything (maybe because of STEP). All functions are grayed out. Interesting. Yes, I have ISDX, so I know it's not a license problem.
Are you refering to Freeform Surfacing (as shown below)?
Are you refering to the Fill command as shown below? If so, that's to create a flat surface.
You have to have the Mold Module in order to use this. Correct?
If you have upgraded to Creo 3.0, you won’t be able to use the installed Help Center unless you have at least Internet Explorer 9 or later (and Mozilla Firefox 10.0.1 or later). If you work for a company which has only IE 8, the installed Help Center will be useless, and there is no work-around for it (PTC Case #12210658). Creo 3.0 Help Center defaults to using your internet browser as the GUI. I like the Creo 2.0 Help Center, as it won’t default to using a browser. So if you have Creo 2.0 Help installed, and you want to upgrade to 3.0, and your company browser is prior to the ones mentioned above, keep the Creo 2.0 Help Center installed, as you can still use it for a lot of things in Creo 3.0. I’m posting this because we use IE 8, and I can’t use the Creo 3.0 Help files. Thanks PTC.
Is this the solution in NX?
The analysis in the attached pdf that you're interested in uses roller bearings, whereas your model has ball bearings and a cage around those bearings. A very complicated model to run in contact. The attached analysis uses a shaft through the inner race, and the outer race is in contact with a plate, and runs a 2D analysis.Your original post was how to calculate a bearing load, and I will show you how to do this. I'm going to show you how to apply a bearing load to a component and then check the applied load. Follow the below figures.Figure 1: Select Bearing LoadFigure 2: Select the Inner Race SurfaceFigure 3: Select Preview to see the direction of the load, then select OKFigure 4: Bearing load appliedFigure 5: Review Total LoadFigure 6: Compute the Resultant Load (or Bearing Load). Always check your load after is has been applied.
What is supposed to be?
Old animation - see please http://communities.ptc.com/videos/1480 PS I think that rnd function in Mathcad is not so petfect Or? Do you have other example for the rnd checking? Werner: Yes - see http://communities.ptc.com/videos/4527 Unable to play video. Please try again later.(view in My Videos)
Delete all the rounds you have posted in the images and make just one continious round on the edge of the cylinder from the first image. It looks like 3 mm? Does it continue all the way around the cylinder? Post an image of it. Are you allowed to upload the model?Welcome to the forum.
Are you trying to measure the angle of twist for a shaft?
Well...that depends. If you create a model in Creo 3.0, save it as an STEP file, open in Creo 2.0, you could view it. And you could modify it some if you have the Flexible Modeling Extension.But if you want Creo 3.0 (.prt file) to be opened by Creo 2.0, no, this cannot be done directly.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.