Recently active
There are countless reasons to attend PTC Live Global, June 7-10, 2015, in Nashville, TN, because of that it was a challenge to pick the "one reason" that will have the greatest direct impact on your product design and development –now and for years to come.BUT, after taking a look at past-attendee feedback it became clear how important the breakout sessions are:Here are a few examples:"The various tips and tricks sprinkled throughout were great for showing you things you might not have known about” Cady Morel, Crenlo"…the ability to see the roadmap of things to come in the future first-hand,” Jamie A. Gratzer, COOK Incorporated "The sessions are indispensable for learning new techniques as well as verifying that your own techniques are on par with industry best practices” Brian Haug, Acumed So with 180+ breakout sessions to choose from this year, you’ll have similar opportunities to gain tips, tricks, best practices and new product information – and save time, streamline processes and
Can you post an image and mark your post as correct?
Sure, you can always get an answer from Google. But what about follow-up questions, challenges with customized installations, or ideas for addressing your problem in a different way? This in-depth, in-person problem solving is another reason why PTC Live Global, June 7-10 is unique. You will be surrounded by the most experienced people with many years of experience on PTC products. You may find that you will get answers to questions you didn't even know you had. During the four-day event, you can chat with 2,000+ peers, presenters, product managers, PTC University instructors and partners to hear their perspectives on how to address your challenges. You can then decide which approach works best for you.There are plenty of opportunities throughout the event to find the expertise you are looking for; the eLearning Lab, the Solutions Expo Pavilion, customer breakout sessions, product training, networking receptions, table topic discussions and more.After attending you will leave the
There is some confusion for people about the Mathcad communities, such as Mechanical Engineering, so that they ask about Creo in them. Would changing the names to be prefixed: Mathcad - Mechanical Engineering be of help?
I just noticed that the champion badges have suddenly appeared.Yay!
Patrick,It's called Creo Simulate (formerly Pro|Mechanica, and before that, Mechanica). The original Mechanica, created by a company called RASNA, Inc., was aquired by PTC, and PTC integrated it with Pro|Engineer.
.
Did you know that this year’s agenda includes more than 115 PTC Windchill sessions? Many of the best practices, tips and tricks you’ll find at these breakouts are the result of hours and hours of trial and error by our customers. And they’re bringing them to you so you won’t make the same mistakes they did. You’ll also have exclusive access to PTC Windchill experts who will show you the latest PTC Windchill updates and will answer your questions. Some of these sessions include: Maintaining and Monitoring PTC Windchill 10.2 - Tips, Tricks, and Quiet Nights - Raytheon Ask the Experts: PTC Windchill - PTC Connecting PTC Windchill to Active Directory: Learn from My Mistakes - JBT Leveraging PTC Creo Unite in a Data Managed Environment - PTC Ruck, Maul and Scrum: Material Compliance Doesn’t Have to be as Dirty as Rugby - Boston Scientific And this is just the start. In addition to hearing from PTC Windchill experts and PTC customers, you’ll have the opportunity to sharpen your PTC Windchill
You're right, but the functions are the same.
Go back to Creo Parametric, open the component with the volume regions and go back into Creo Simulate with just that component, then try to delete them.
Anders,Go to the Simulation Feature in the model tree where the volume region was created, RMB, then delete. See the below image for clarification.Welcom to the forum.
Hi,I would like to have more Quik-Information on the Mouse.For example I need information about the color (RGB) of a hole,because it's used for CAM.We have defined a colour-table, that generates the NC-Sets.Once I have colourd my model, later I do not get the information about the color.Regards,Jürgen
Hi Team,There will be a virtual meeting on Feb. 26th hosted by Anark covering their solution to convert annotated Creo files into 3D PDF.Please refer to the attached invitation and contact Chris Garcia from Anark directly in case you are interested in attending the session.Stephan
I would like the ability to remove what shows up in My Learning. Alternatively, allow me to customize what shows up where on the My Learning portal.
First product idea! As an instructor, I frequently want to send students directly to a specific topic. The way that I have done this so far is to email the link to myself, copy it, and paste it on our course website. It would be really helpful if I could just copy the link and not have to email it to myself.
Huruj, We're these links helpful?
After doing research for a number of weeks. I have finally created a tutorial on how to create involute gears in Creo Parametric.Part 1 - Creo Tutorial - How to Draw Involute Gearhttp://youtu.be/aaliyx4QLH8 Part 2 - Creo Tutorial - How to Draw Involute Gear http://youtu.be/qknxEZEPVzEPart 3 - Creo Tutorial - How to Draw Involute Gearhttp://youtu.be/Fghiei09uOY Part 1 - Longer Versionhttp://youtu.be/gl9_nhD1xX4
Does someone at PTC or in the community have the ability to move discussions (or anything else) that was created in the wrong place?Example: http://communities.ptc.com/message/271372#271372We don't want to have the same information repeated in two different places. Someone should be able to move things....It seems like every couple of days someone is creating a document instead of a discussion, or simply posting in the wrong space.
PTC Creo Design Exporation Extension je unikátní nástroj pro snadné provádění a vyhodnocování nových nápadů a změn v CAD modelech.Oproti klasickým způsobům založených na vytváření kopií nebo zálohování souborů do nových adresářů, zavírání oken a čištění operační paměti, nabízí Creo nástroje, které usnadňují a urychlují vývoj různých variant a nalezení nejlepšího řešení. Design Exporation Extension umožňuje rychlé vytvoření změn designu a zachycení jednotlivých vývojových verzí. Uživatel tak má možnost lépe zvládat a řídit složité konstrukční změny, objevovat nové nápady, provádět okamžité interaktivní prezentace jednotlivých verzí.V každém okamžiku během návrhu může uživatel iniciovat relaci Design Exploration a celý obsah bude zachycen v bezpečném 3D režimu. V tomto režimu může uživatel svobodně provádět úpravy na více modelech a tyto úpravy zachytit v kontrolních bodech. Každý kontrolní bod bude ukládat přírůstkové změny na modelech v rámci času. Mezi jednotlivými kontrolními body se
Maybe the attached spreadsheet will help.
Glad to help. I saw in your original model the discrepancies that you described, but I'm glad you got it figured out.
If you can save this as a STEP file with the points and curves, I can import it.
This group is not the only way to learn about highlights and latest updates from the Nashville event. Every day, through our social media channels, we feature different aspects of PTC Live Global, as well as useful information that will help you on your decision to attend. This is just an example of what you’ll find if you follow us: What’s new for 2015Interviews with presentersMost frequently asked questionsFeatured session of the week A preview of tips & tricks sessionsOther event highlights So, if you don’t want to miss anything about this year’s event, make sure you follow us on one (or more) of these channels too: LinkedIn, Facebook, Twitter, YouTube and Slideshare.Ready to tune your dial to #PTCLive?
HiI've been working with Teamcenter 9.1 for about a year now, and I'm really astonished.I thought Windchill was not the best UI and I had some talks with PTC User Experience about it. Most of my points came through to an SPR and it eventually looked good.Now I'm working with Teamcenter 9.1 (eventually 10.1) and the UI is horrific!!It looks like a huge Windows Explorer with some added functionality.And the functionality is well hidden.Windchill's menus with Products, Libraries, Projects and so on, is lightyears ahead of TC's folder structure and dull menus and colours.Also the interface with CAD applications are a bit cumbersome and takes a lot of learning to handle.Well, just some thoughts.....
Got it and voted up!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.