Recently active
There is a way to link the line numbers or find numbers between WindChill and Creo as documented: https://www.ptc.com/en/support/article?n=CS197902 https://community.ptc.com/t5/Windchill/Find-and-Line-number-support-pdf/m-p/449900 and other places. This is a good starting point. However, this requires manual entry of the values within the model tree for the component level parameters. The issue with this is that Creo will fail checkin of an assembly if, for example,: There are 10 of the same screws and only 9 have the findnumber field entered (you missed one) There are 10 screws and you gave some of them one find number and others a different find number (you forgot some of these screws were higher up in the model tree with an already assigned number) You gave these 10 screws a find number that was already assigned to something else Getting the values entered correctly, effectively and quickly is almost impossible in even "smallish" assemblies when: Components are embedded
Please find attached images & the model, to demonstrate dimensions display when the annotations are activated. Attached part is with mulitiple features& when we activate the annontation dimensions display, for some of the dimensions, the witness lines are not touching the object line.This is due to the sketcher dimensions created for the first feauture.But the requirement is, when ever the new features are created with specific dimensions, proper display of dimensions to be made automatic & ther should not be any manual drafting work. This will reduce the drafting time & will be very much useful, incase we want to automate the 2D drawing process.
When using imported geometry, a surface or quilt may be present that represents a thread. However it will not behave as a cosmetic thread does in relation to hidden/no hidden in drawing view. Would like ability to select surfaces/quilts, RMB Convert to Cosmetic Thread. Does NOT have to be featured just need to behave as a cosmetic thread.
In Part & Assembly Mode make Cosmetic Threads disappear in No Hidden mode.
For the creation of a revolve (over 360°) we used the option to select twice up to the sketch plane as an option. This generation method has the advantage for us that no angle dimension 360° is displayed when showing the dimensions. Now the product specification has been changed and this generation method is no longer supported. It is not even possible to select two different planes that represent different angles. This can be read in the CS296387. This is especially unpleasant because the generation method must still be supported for existing models. Only a new generation is no longer possible. Please vote for the fact that the creation of revolve with the option "to selected" supports two datum planes!
The "insert-mode" mode allows it to better understand the structure of assemblies and parts. In Sketches there is no such possibility. For more complicated sketches an "insert-mode" might be useful, so one can better understand the structure and dependencies.
Creo 4 can insert images (png, and jpg). Toolkit lacks this feature. It would be beneficial for automation if toolkit could insert images on drawings. Thanks
The reason this is important. When items are placed on either of these layers the display of these items can only be changed by removing them from these layers. This defeats the display status of the other layers as intended. If models are checked into common-space with items on these layers(hidden/shown), then the display of these items is no longer as intended by the layering schema. This will negatively impact other users as they are no longer able to predictably control the display status of model items.
The main outcome of this result is that it shows the volume contribution from injected plastic melt of each gate, and the result values are shown in percentage. Normally, a balanced gate contribution is needed for obtaining optimized results. Since the main focus is percentage and balance, location of the gates is not currently shown. These may be noted in the PPTX file after generating the report if desired. I think this would be a nice feature to have since we do not display sprues or runners as Moldex3D does.
Dans le menu d’édition du plan de référence, je souhaiterais pouvoir modifier les valeurs de 508.660 (Largeur et Hauteur) tout en conservant l’adaptabilité des plans de référence en fonction des dimensions de la pièce modélisée. Si je coche l’option Ajuster le contour en modifiant la taille de la largeur et hauteur, je perds l’adaptabilité. La valeur de 508.66 n'est pas modifiable dans une option de configuration. Peut-on trouver une amélioration pour configurer cette valeur ? Merci
When creating a break in a drawing, and you specify the leader line on one side of a intersected dimension and the intersected dimension (not the other side), you can't control the default break width. It seems to auto-create a large break. It takes whatever value is in witness_line_offset detail option and has some hard-coded proportional increase from there.
I simply suggest to add the possibility of selecting the time/frame directly, without the need of scrolling the cursor. If I want to see the frame 36 (as in the pic) I "digit" 36 somewhere.Bye
Please create a more robust library of standard symbols for ASME (ISO, etc) including the parting line symbol and other symbols found here (that are already not in Creo): https://www.tec-ease.com/gdt-terms.php Thank you!
When using solid welds in the preferences of the welding tool (see fig. preferences.png) it is often not possible to create solid welds, because the material side of the weld is interpreted wrong by Creo (see fig. material_side.png). Please add the (grey) material arrow for solid welds, too (compare material arrow from surface welds). When creating solid welds, it is not intuitive at all to use the button "Flip material side" without any feedback from the program. Regards, Konrad
the need to simulate the deformation of the product when it is printed, like simulate but calculating on the basis of shrinkage and temperatures of the mould. model deformed.
Problem: We use in Creo 2 following Toolkit function “ProDimensionJogCreate”. So we can sort some dimensions manually on 2D drawing with Jogs. In Creo 4 this function was moved to another licence package called “TOOLKIT for 3D Drawings”. So we have a missing feature on customer site. Solution 1: Move function back to standard licence package “TOOLKIT”. This is our preferred solution. So we have no need to change our code. Solutions 2: Provide a new function with similar functionality in standard licence package “TOOLKIT”.
Creo Parametric: 5.0.3.0 Module: Assembly Config Option: open_simplified_rep_by_default Automatic Rep REFERENCE: SPR 8112265 CURRENT ISSUES: Automatic Representations are showing us incorrect geometry for family table models, old files and for models with assembly cuts. The message log shows that it knows there are issues with the graphical representation. RECOMMENDED SOLUTION: Option 1: When Creo has an issue with the Graphical representation, the software should automatically use master representation for that component. Option 2: Fix Automatic Representations so that is shows correct geometry See photos for specific issues and justification JUSTIFICATION
For MBD a part can have a lot of combined states... If I create an inheritance part I would like to have the possibility to copy automatically the combined states in the new target part. The combined states should have the same orientation plane (if exist in target part of course) If a X-Section does not exist in the target part, no X-section in the target states. No shown annotations in the target combined states, they are not the same (ID different) and not sure the user want them. Actually we copy the part, delete all features & create the inheritance feature. Not very nice. Thanks.
It is not possible to assign supplemental geometry (sketch curves, axes...) to combined states for inheritance parts. For exemple, on image below, what is possible in a classic source part but not in the inheritance model....
there is NO Toolkit API yet available that could write the ProMechModel object/handle that was generated by API ProMechmodelGet() to a file If we can open this file in Creo then it will help to check how ProMechModel is created (for example which faces, edges are merged from Native model). This will help a lot before setting and meshing analysis.
Ability for pro/program to swap out instances of a merge/inheritance model in a .prt similar manner to how components are changed out in a .asm. Compatibility with interchange assemblies would be nice as well.
When exporting in U3D PDF, there is no option available to chose the units or use the CREO model units. All U3D PDF are created in meters regardless the model units in CREO. This can give some scalling issue using U3D PDF in other software. An option in UI or and the config.pro to use the model units or to select a given units will be very help full. Why use meter when the CREO model is in millimeters.
Testing Ideas
When importing in a part DXF, STEP... files from different suppliers, a huge number of useless layers are created. Sometimes more than 300 layers: 0,1,2,3,4,5,6,7......299,300...please see image below. These layers will be present in all assemblies, sub-assemblies, drawings...not good ! We try to delete most of them with Modelcheck but it should be great to have some config.pro parameters like : DXF_IN_LAYERS_IMPORT YES/NO STEP_IN_LAYERS_IMPORT YES/NO ... Thanks.
Expanded family table repeat region report symbols. Example: Report symbol &fam.inst.param.PART_NUMBER would only list the family table values from the "PART_NUMBER" parameter. This would replace the usage of a filter.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.