Recently active
Please restore text bold weight/thickness control to the Creo/ProE font.ndx for individual text lines or headings. Currently font.ndx cannot be made bold in any visible/appreciable way. If we bold any font.ndx text (using CTRL+B) the level of line thickness is so close to the default that it cannot even be visually differentiated on a B-size pdf of that dwg. This bold feature is basically useless for the .ndx font! In addition the format painter no longer works for individual text lines, regardless of the font type you are using. Please fix the format painter to work with individual lines of text, and between separators (e.g. @@ , {0:} ). I actually very much like the new on-screen WYSIWYG text editing but some of the previous functionality which has been broken really needs fixing. (As a side note, we would really like to switch to a TTF or OTF font, but that is not something we can do without serious testing, plannin
The material properties from the material library should be parametrically linked to the parts they are assigned to. If a material is revised to have some properties change, all parts that have that material assigned should reflect the updated properties in the revised material. We have a material library corresponding to the raw materials we buy. We noticed a mistake in the Y-factor for a lot of steel parts, and we revised the material properties to change the Y-factor. None of our parts that had those materials assigned automatically updated to reflect the new Y-factor. We have to manually go into each part and delete the material assignment and re-assign from scratch to get the new properties. There should be a parametric link which would avoid a lot of this manual labor.
Model Tree allow the display of model units in Column drop down. I have an .asm but the models come in various units. I was to see the models with incorrect units and quickly fix. Do a quick recalculate and regen once or twice to update PRO_MP_MASS and my weight parameter. I can add parameter columns: PTC_MATERIAL_NAME, PRO_MP_DENSITY...but not Units
Logged as PTC Case: C14731712 I have a Notebook with 1200+ parameters. I create a new part (or assembly), and I declare the notebook to that part. Currently, when I declare, all 1200+ parameters are now accessible in that part. I only want to declare a few parameters. This is not possible. Another way is to declare a notebook to another notebook, but I would like to create one "master notebook" with all parameters, and then create "sub notebooks" which will only "import" a few parameters from that "master notebook". Sadly, this is also not possible. So I would like to propose an idea where the user can select which parameters he would like to declare into a part (or assembly).
Currently the Creo assembly BOM report file does not have delimiters or a way to deal with blank parameters. The text file will just show a blank space here which causes issues for scripts reading in this text file. Can Creo add a BOM formatting option for the assembly BOM report to have delimiters or use a special character or string if a blank parameter exists? See this link for the original question I asked that is related to this. https://community.ptc.com/t5/Assembly-Design/Assembly-BOM-Report-dealing-with-blank-parameters/m-p/590090
When you startup Creo you get the Resource Browser (PTC - Creo Parametric - Start) page by default. This page may be helpful for new users or those wanting to keep up to date on information from PTC and it provides links to tutorials and other information such as Liveworx. (https://www.ptc.com/community/creo4/parametric/) However, we are on still on Creo Parametric 4.0. When you click the Getting started link (which even in text says "Tutorials for new users of Creo 4.0". The link goes to the latest help center. Which is now Creo 5.0. This is confusing for our users and already got a support request from one asking that we fix it. If you go to the Creo 3 page: https://www.ptc.com/community/creo3/parametric/ it says tutorials for Creo 4.0 and links to the Creo 5.0 help center. All I'm asking is that the older versions of the page be updated to point to the correct help center (https://support.ptc.com/help/archive/creo40/creo_pma/usascii/). This is a site h
Hey guys! Please add the function "Clean Dimensions" - which is already available in the 2D - for the 3D. When working with annotations on a 3D model, it is often a pain to manually center the value of every single dimension. Spacing out the dimensions with an increment and offset is, for now, not possible either. This would save our constructors a lot of time. Thanks. Regards, Konrad
CREO4.0 When saving a copy of an assembly the window ASSEMBLY SAVE A COPY displays all components to select reuse or save a copy. It is possible to add additioanl columns to see e.g. parameters of the components to be reused or copied. It is not possible to save these settings, with the next Creo start you need to add the wished columns again. Bettr add a finction to save these settibgs just like save settimngs in the model tree.
Currently when toggling back and forth between combination states and modeling tabs the annotations from the last combination state stay on the screen. I am proposing that the annotations automatically toggle to off when switching back to modeling mode. The annotations are a distraction from the modeling environment. Thanks!
We have been using freeform a lot recently to design toys. As we move into the production tooling phase we need to split the bodies into two or more parts. There are a few issues with this process: These toys are character sculpts that have to go through different approval phases. As we get to production approval we need to tighten up the final surfaces. No body wants a wild parting line so we try to tweak the surfaces in freestyle to smooth out the partling line - it would be VERY useful to have a live draft analaysis happening while we do these tweaks so we can see the effects of the edit on the parting line.
We use Freestyle extensively for part design. We tend to have multiple Freestyle features in the tree rather than one big feature. It makes it easier to move bodies around. tweak individual elements etc. For example, if we are developing a toy character, we might have the head, body, arms, legs as different Freestyle features. If we are editing (say) the arms, we want to see the effect this change has on body and legs etc. but of the arms are created before the body in the tree, we can't see the body for legs feature during the edit. So what we do is just move the feature we are editing to the end of the tree so we can see the effect. It would be a great feature if we could see the other downstream features during these Freestyle edits. I appreciate the issues with Chile/parent relationships, but if the freestyle features are unconnected (allowing us to slide the order around) then it should be feasible to enable this.
Tools like Freestyle and Style let you create very sculptural forms but when these forms have to be turned to production tooling it can create issues. Our current workflow is as follows: Sculpt the part for concepts through development approvals phases For tooling development we run draft analysis and use this to tweak the surfaces to try to smooth out the parting line. Then split the parts and add B surface details. That phase of tweaking the surfaces can take a long time - nobody wants a wild parting line. What would be perfect would be the ability to draw a 3D curve set (on existing surfaces would be fine) then force the adjacent surfaces to change so that the parting line is now the drawn 3D curve set. This can be done. Think Design has had this capability since 2001. In that system you can additionaly define the minimum draft angle from the parting line, and the ThinkDesign Global Shape Modelling system alters the selected surfaces to the criteria set.
It would be very useful to bake the draft analysis results onto a part as an appearance, so this could be shared via drawings/viewers etc. Currently we have to screenshot the part in different views and markup for PDFs to discuss with toolmakers and stakeholders.
Please add a function where it is possible to create a new combination state with copied annotations that are dependend to the source combination state. This is often required when trying to display detail views in big assemblies. For now only sub-states (i.e. Orientation, Simplified representation, Cross Section, Appearance and Layers) of the source combination state can be referenced or copied. Best regards, Konrad
Hello, please add a function which allows to simultaneously delete several annotations in an annotation feature. For now it is only possible to do this one by one... Best regards, Konrad
Just switched to Creo 5 and the default selection filters are so annoying. Now I have to add two more clicks every time I open a file or switch windows because I have to change the filter selection from Geometry to something logical like Parts for Assembly mode of Features for Part mode. The My Filters option doesn't help either because you can't set that as the default. PTC please update the filter selection interface so users can see which filter is selected in My Filters and so that the filters can be defined in a convenient table interface. Reference: Is there a config.pro option to set a default selection filter value in Pro/ENGINEER Wildfire 5.0 and Creo Parametric https://www.ptc.com/en/support/article?n=CS19200 After digging into it a little more, I found you can actually set the My Filters setting as the default by selecting the "Set my Filter as the default selection filter" box. (File > Options > Selection). However, all that sho
Currently it is not possible to show sketcher based ordinate dimension on 3D level using Show Model Annoations (it can only be shown in drawing level) - See example attached. PTC is not planning to fix this as it is regarded as standard/intended functionality (PTC CS152204 / SPR 2856507/2203317)This is also a frustrating limitation when trying to apply other annotations to the 3D model, for example a GTOL on an ordinate dimension.You have to re-create the dimension (driving) and then only you can apply the GTOL on an ordinate dimension in 3D OR use linear dimensions, which are not always practical.
Currently there is no way to map user defined colors to different pens in the pen table. This forces all user defined colors to plot using Pen #1. It would be nice to set the user defined colors to a new pen (in our case so that we can set no color and have the PDF inherit the user defined color of the symbol). Currently there is no way to do that. The ASME standards now allow for colors to be used in drawings and our engineers would like to use custom symbols with custom colors on drawings and create the PDF properly, where geometry lines (Pen #1) are all black and the custom symbols retain their original color.
As in article CS97061 described, the redo and undo functionality is not available for mfg Features. Please add this in future
It would be very nice to have the possibility to supress single Features in the tool Motion tab of mfg Features. Similar functionality to model tree.
The actuall behavour of pattern in the mfg mode is not good. When I make a pattern of a part witch is classified for example as a fixture, all pattern parts should be fixtures to. Actual i have to do this manually
Actually, the automatic material removal cut works only for 3-axis trajectory milling Features. This functionality should be improved also for 4 and maybe for 5 axis
Wouldn't it be easier to access layer tree as a tab, like "Folders" or "Favourites" which are just next to model tree in the browser? It would save us one useless click. More generaly, a ergonomic study based on "useless click removal" would be a good thing for CREO.
At present we are unable to Save a backup of an assembly containing Many sub assemblies and child parts into a new folder along with the drawing files without altering the Model / Drawing names. This improvement will be helpful to many of the Creo Lovers.
In the measures window of an assembly, in the mechanism environment, you see all measures regard all sub-assemblies.What I suggest is a way to "filter" the measures in a better way, and a manner could be a "tree".
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.