Recently active
Since Creo 3.0 the workflow for paste special with advanced reference configuration was chaged. If the reference dialog for the paste action appears it is behind the active window at the beginning. If the user clicks on the reference selection window it comes to the front. When moving the mouse pointer above the reference of original feature area the original window (where the feature was selected) comes on top. The reason for that is to have the original model visible where the feature was copied from. This was changed because of an user request (see Article: CS287471). That behaviour ist not very streamlined and the current workflow is to make the Creo window of the source part smaller to have full access to the dialog. The idea to change that would be a second window that should appear inside the target window showing the source part. The same behaviour as it is when selecting references for copy geometry.
If you add parts from the prt file and become an asm file, the drawing dimensions will not be preserved. Therefore, it is inefficient every time it is rebuilt from scratch. I hope the drawing dimensions are preserved.
It is possible to include a Layer Names column in the model tree. I was initially going to recommend this to our users that are not familiar with layers, but I discovered that this only reflects if the feature itself is in a layer. In the image below, the starting datum elements are in layers as shown. However, Extrude 1 is not shown as in any layer. Extrude 1 however, does contain an axis in the 3_ALL_AXES layer, and feature information reflects this. The "Layer Names" column should be adjusted so it reflects all entities in "Entities and Geometries" in the Layer section of Feature Info. This can help users quickly and accurately track down what layers are controlling items in a feature.
After creating separate drawing sheets for every component we merge all of them in the 1st drawing sheet using insert-import data/drwaing. But we can add just one drawing data at a time i.e we are not able to select multiple drawing files at one time. It will be very helpful if multiple files can be selected at a time.
I have a couple ideas for hiding text within a Repeat Region Cell. Idea 1: You can write a relation to hide individual cells, but you can only hide one cell using the exact value within that cell, and you cannot use wildcards in a repeat region relation to blank all cells containing a certain set of text strings to blank. Is it possible to add wildcard ability to the repeat region relations so that you could blank all of the cells containing a certain string of text. Idea 2: Is it possible to make it so that you can change the text color of individual cells within a repeat region, currently when you change the color of text within a repeat region, all of the text within that column changes. This could be a good way to blank off or hide individual text when creating .pdf of drawings or printing drawings. This was a setting we had with our printers and .pdf files for Creo Direct that a certain user defined color would not print in a print or in
I came from Creo Direct where any view that needed updating would show the icon for the specific view in the drawing tree a color that indicated it needed to be updated. It would be great if Creo Parametric could do the same thing that way with large assemblies I could have the automatic update for drawings set to "no" in case of long drawing view update times for large assemblies
When a proposal from ECAD requires a movement of a component, which is a pattern member, a warning is shown on the screen - Cannot preview/commit changes on pattern members. Different issues occur as well when the proposal involves moving an instance. We use our components to reference panel cutouts with other children references as well. We can't have pattern components failing or patterns deleting. The most obvious/easiest workaround that I can think of is simply to convert the pattern to single components with the same internal IDs that won't fail any children. Please help with this as this is critical to our business and it will be hard to move to ECAD MCAD collaboration without proper support to patterns.
We have been utilizing GD&T for quite some time and just recently moved to Creo 4. With this version, the adoption of some checks for GTols were implemented, which is great new functionality. The Legacy Datum Annotation Conversion utility works well, but should be extended. There needs to be a workflow to convert Annotation Features to the new annotation methodology. The need for this is due to the fact that you should have either a Datum Tag or Datum Targets, not have the both for the same Datum.
Currently it is not possible to search for Balloon Notes (PTC CS254195). Having the ability to search for and select all Balloon Notes placed could be very handy. Details: We make extensive use of Offset type Balloon Notes (offset from dimensions, GTOLs, notes etc) to indicate engineering changes during a revision, among other things. It is therefore interesting to be able to quickly search for and select these Notes: To delete obsolete balloon notes To rapidly select and change the balloon note color (in the case of revision balloon notes scenario mentioned above) Current methods: For the first scenario, users need to make use of selection filters and manually drag select balloon notes to delete them For the second scenario we employ a mapkey that somewhat automates the placement and color change, but it is still error prone. We have tried other solutions: Custom symbols which have no offset placement type available, so user has to use relate to object to link no
We haven't found a way to export drawings into any image format through the C++ Toolkit API. We would like this to be added as an export in the API. Preferable PNG or JPG.
Creo parametric Issue is the Harness family instance that I explained in attached PPT and Video File. Family table - Harness Cabling location does not work/move when the harness instance driven by Family table.
Why not? You can control-click all the surfaces one by one, so why not allow the use of seed and boundary to speed it up? Isn't that the whole point?
You carefully define a STEP export profile to use as the default for your company. A user tries to use it, but is curious and starts clicking around, but wants to reset to the default, so of course they click Reset. Except what they get isn't a reset to the default profile, they get a reset to the factory OOTB settings, which PTC says is intentional. The Reset button needs to reset to the defined default profile. Yes, you can Load Profile, but that takes a user to their workspace, not to a location where you would store profiles. It would be much easier to cancel the whole process and start over.
for using MBD in an existing part or assembly which was created in an old Creo-Version, it is necessary to bring there dtl-Options up to date. I would like to have an config.pro-Option to automatically assign a chosen dtl-file – separately for part and assembly. Beside this it could be necessary to also update the dtl-options of the drawing to use for example the symbol_font=iso instead of symbol_font=legacy or other dtl-options. 3D: symbol_font=legacy / 2D: symbol_font=legacy 3D: symbol_font=iso / 2D: symbol_font=legacy 3D: symbol_font=iso / 2D: symbol_font=iso
I hope that Creo Parametric will have a direct export (in ALL modes; ie: PART, ASSEMBLY & DRAWING) soon that would enable it to produce precise and easily editable VECTOR artwork for use in Adobe Illustrator (hereafter referred to as AI). Currently, to get an output from Creo to where it is useable in AI requires many steps. First, 3D parts/assemblies have to be modelled, even for 2D artwork. Then associated non-shaded DRAWINGS for the parts/assemblies have to be made and individual feature surfaces manually FILLED (Layout>Hatch/Fill) to get a proper VECTOR output (through DWG export) with a semblance of shading; shaded views get exported as raster graphics only. Exporting 3D views directly results into everything turned into a mess of tiny straight line segments in place of splines and tessellated lines instead of shaded surfaces. Shaded/Rendered views (eg: from screen views in part/assembly mode and views in drawing mode) should have the option to be expor
Create API to get the model dependent UDFs from a GPH model. Currently there is no way to determine the dependent model from a GPH model. To my understanding the information is in the GPH model file but has been hidden or not exposed to an API. Older versions of Parametric had information about the dependent model for the GPH model in the header section of the model.
User-defined colors are very important in DRW to change entities colors. We use the map appearance.dmt (pro_colormap_path).With printing mapkeys, all system color entities switch to Black&White except user-defined colors.In the new Creo 3.0 & 4.0 UI text ribbon, it is not possible to access to the user-defined colors map.Pity & dangerous if users select system colors instead of user-defined colors....Thanks.
@ Currently there's no opening when updating a Drafting titleblock using the Windchill Workgroup Manager. Something simple as putting the drawing scale in the titleblock is therefore not possible. In WorkManager/Model Manager, you had a macro updating the titleblock. You had the possibility to edit/overwrite the macro so you could perform actions before or after the titleblock update. This could be used for example to retrieve the Drawing Scale, and put an extra attribute to the "tb" textreference table (now "WTtr"). This attribute would then be automatically filled in the titleblock.
Please implement cut using solid body sweep as it is done in SolidWorks or Catia. See Solidworks video Using Solid Body Sweeps in SolidWorks - YouTube
Creo Simulate displays scientific notation 3.6e+01 MPaI need to show non scientific notation 36 MPaThere is not possible to achieve that display.Note:The opposite procedure is possible as you can see here:https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS124580&source=Case%20ViewerAs a workaround for displaying all results legend as scientific notation in simulateSet the min of legend format less than 10^-4 (e.g. 0.00009) and uncheckScale Between Min/MaxThank you in advance for voting RegardsMartin Stary
With the option default_chamfer_scheme, we can set by default on anglexdCould we have option to specify angular value and dim value (for exemple default_chamfer_angle and default_chamfer_dim)This is the only option for choosen easily dimensioning scheme.
A way to either automatically optimize region order (similar to drilling) in Volume Milling or by pick order (similar to the old style). It is time consuming to order a large amount of regions using the current method of ordering them. It's hard to see but there is an excessive amount of rapiding in the default zig-zag order creation. This amount of regions takes a very long time to order using the current method.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 9.0.42. What is the problem?In Creo Parametric, you need two Mirror features to symmetrize in two "directions".In SolidWorks they let you define a "secondary" plane which allows to reduce the quantity of features.3. Are you using a workaround? If yes, please describe it.Yes, we are defining two features when only one should be sufficient (as it is in SolidWorks).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In watch making, we often define a quarter of definition that we symmetrize in two directions
Please include detailed documentation such as screenshots, images or video.(view in My Videos)1. What version of the software are you running?Creo Parametric 8.0.8.0 and Windchill 12.0.2.122. What is the problem?The Undo Checkout action from a Windchill browser REMOVES object from the Creo Parametric Workspace !3. Are you using a workaround? If yes, please describe it.Explaining to Creo Parametric users to not use the undo checkout action from a Windchill browser …
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo Parametric 9.0.2.02. What is the problem?There is no Toolkit API to Identify the Parameter' Source.3. Are you using a workaround? If yes, please describe it.No workaround is available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.While collecting the Parameters for Annotation Element, I want to collect only User-Defined Parameter.If idea is implemented, then It would help in collecting Only User Defined Parameters and add those information in JT Files5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It has a high impact on our organization as our customers are interested in collecting the Parameter based on it's source, (in my case User-Defined Parameter only).
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.