Recently active
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am a Creo Support engineer for a PTC reseller where I handle many PTC related issues. 2. What version of Creo Parametric are you currently running?I am running Creo 10 and all versions below (to 4) 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. I really would like to have the User Defined in the SimRep columns in my Modeltree. Where is says, No Explicit State, I can check Exclude, Master Rep, Automatic Rep etc, but not User Defined. This should be a fly-out menu. Now I need to select the component in the Modeltree, RMB, User Defined.Adding it to the dropdown list should work faster.It would really speed up some time when working with large assemblies. 4. What is the use case for your organization?Share the knowledge with our Creo customers 5. What busines
1. What version of the software are you running?9.0.5.0 2. What is the problem?Horizontal navigation of the combined views in the modelling window is very cumbersome, when more than 12 combined views exist on a model.It should be possible to place this list in the Model Tree window, to allow user to have easy access to vertically scrolled list, or dock that window on the right side of the screen. I am aware that View Manager can remain displayed, but this is not an optimal solution.3. Are you using a workaround? If yes, please describe it.No workaround available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Standard designer's work, so switching between combined views , must be easily accessible for users. Especially important for MBD. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Switching between com
1. What version of the software are you running?Creo Parametric 8.0.5.02. What is the problem?In the 2022 ISO 129-1 standard, there is an alternate way of creating ordinate/running dimensions. This allows you to create an origin and have short arrows that point only to the feature being dimensioned - see attached jpg. This would be very helpful for us when we have a part with many small features we want to dimension so that the dimensions do not all have to be inline.3. Are you using a workaround? If yes, please describe it.Since we recently switched from ANSI to ISO standards we have switched the ordinate dimensions back to ANSI which allows us to have dimensions referencing the same zero on both sides of the part so there is more space for dimensioning. I don't like using mixed standards...4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If Creo supported the alternate m
Creo Simulation Live starts to solve a model even if this is not fully constrained; it would be useful to have a warning for this situation
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo Parametric 9.0.2.02. What is the problem?Currently Weld Symbols are identified under User Defined symbol. There should be a way to identify them separately.3. Are you using a workaround? If yes, please describe it.No workaround available in toolkit API.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our application, we are providing User to control the types of PMIs/Annotations getting written in JT file. E.g. we have a option to control Dimension, Note, GTols, User-defined Symbols etc.But same User-defined Symbol is controlling Weld Symbols Annotations too.That's why we need an API to separate weld symbols from User defined symbols.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It's af
Can we have a fluid element? A sealed container filled with a fluid is then subjected to an external load. The fluid pressure rises uniformaly (ignoring gravity for the moment) and the structure as to respond accordingly There is NO fluid motion, this is not fluid dynamics, this is a static solution. This should work with assemblies.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?CREO 9.02. What is the problem?CREO generates a lot of xml files (please see attached screenshot: *_log.xml).- currently, all files are getting saved at C:\Users\Public\Public Documents. (to the working directory)- user wants to save all these files under a new folder C:\Users\Public\Public Documents\Log-files.3. Are you using a workaround? If yes, please describe it.no workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.it would help to save all *_log.xml files in 1 particular directory.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)little impact
It is currently not possible to graph measures against time steps, for example in a large deformation analysis. The results are all available in the .res file, but the formatting is clunky and requires either programming or a lengthy manual formatting exercise to use in Excel. If multiple time step results exist, there should be an option in the results window to plot measures against time step (or equally against a load value or the time fraction, to give a linear graph axis even if the time steps are not equally spaced).
I guess the title says all I've wanted to say... At the moment the program can solve only small deformation with its non-linear analysis. We can't run, for example, the fishing rod's analysis. Thanks Bye
When performing linearized stress analysis when viewing Creo simulate results, it would be nice to export the data points from the graph to a CSV or Excel.
In Both Creo Simulation live Plus and Creo Flow analysis, we can't easily create the fluid domain if one of the openings is surrounded by multiple surfaces. It forces the users to create the fluid volume manually with surfaces copies, merges, ... which is long and might be unstable in case of modifications. It can happen quite often as Creo divides all cylindrical surfaces in 2 separates surfaces. In the attached screenshot, I've recreated a simplified representation of the limitation. A simple fluid vein represented by the radial hole made in the tube cannot be created because the hole crosses the 2 half cylinders.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 9.0.4.0 / Windchill 122. What is the problem?Would like to stop users from replacing parameters in a format with a manual text entry.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Example: The PTC_WM_REVISION is called out in the rev block on the drawing. User can go to 'Properties' and remove the '&PTC_WM_REVISION' and replace it with text of any revision they wish. Revision is controlled by Windchill and should only read from Windchill.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Will impact all parts of the company if a user manually enters a revision. When a new revision is created, the revision will not upd
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo View 9.02. What is the problem? Currently Creo View can be configured to use 'use native viewer for pdf viewer' or the supported versions of Adobe Reader, Adobe Acrobat installed on the local machine for opening pdf files. If you are not using 'use native viewer for pdf viewer' this means Adobe Reader, Adobe Acrobat has to be pre installed on the device before Creo View is installed, and then for enhancements, performance security and performance to Adobe Reader updated on a regular basis. With the newest partnership between Microsoft and Adobe Adobe Reader, Microsoft Edge and Adobe partner to improve the PDF experience Would it be beneficial to have Creo View support opening pdfs, if Microsoft Edge and Adobe Enhancement Viewer is enabled on the device? This means, Adobe Reader standalone would not have to b
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo Parametric 9.0.4.02. What is the problem?Feature name should be hidden when using "Edit dimensions". At "Edit Definition" the feature name is hidden.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Should make the model clearer.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)300 users
It would be great to have a smarter line generator when creating Explode State.In this simple exemple, we can see that it's hard to have a correct result at the first time .Not easy and really powerfull.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 9.0.2.02. What is the problem?Use_direction Api not implemented3. Are you using a workaround? If yes, please describe it.No.4. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Morethan 100+
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 8.0.8.02. What is the problem?When adding a Table (BOM, Revision etc.) onto a Creo Drawing, there is not simple way to lock the Table into a consistent position.3. Are you using a workaround? If yes, please describe it.Currently when a new Table or a new Row within a Table is added, we must Insert using the X/Y coordinate system. This offers a solution, but also assumes that new users know how to use it and that experienced users remember the X/Y values at all times. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.There should be anchor points that can be added to the Drawings templates. When a Table is added to the Drawing, the Table should lock to the anchor point so that it is constantly placed and located. This keeps all Drawings looking clean and organized.&nbs
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Windchill 12.0.2.9 2. What is the problem?There is no preference to make the radio buttons default to "change" when using the Set New Name UI while Renaming. The optional radio buttons for New Number are Unchanged, Autogenerate, Generate document number based on related Part and Change. The optional radio buttons for New Name are Unchanged, Same as number and Change. However, the only options in the preferences menu for New Name and New Number are "Unchanged" and "Autogenerate". We want the option of "Change" so the user doesn't have to select these two radio buttons everytime they enter this UI. 3. Are you using a workaround? If yes, please describe it.The workaround is to train the users(and maybe they will listen) and have the user's manually select the radio button for change on New Number and New Name when they ent
">>>> error <<<< Internal Error (001) occurred..." seems to be a default that is attached to too many problems. Recent issue was that you cannot use cross sheet graphics if the Def_sheet_format is protected, even though the graphics do not appear to have any connection with that layer and were not being placed onto it. The admonition to run the check database routine almost never reports any issues (in this case it was NOT a database issue) and it requires the work to package up enough information for diagnostics and a file a support request for something that a reasonable error message should take care of.The ">>>> error <<<< Internal Error (001) occurred..." message should be reserved for actual corruption of the database or a program error. Anything significant enough to create it, should be considered a programming issue.
Whenever you open a group shape in Schematics, it assumes that you have modified it when you close it and forces you to make a decision on it the next time that the catalog is verified. If you don't verify it right away, you may have forgotten why it was opened and choose the wrong disposition. Quite often a person opens a group shape to check on details or to copy something. It would be good if the software could check for changes and ask the user if they want to keep the changes (sometimes something is inadvertently changed or changed back) when the sheet is closed. This would be similar to what happens in most programs when they are closed.
Frequently, an item that the cursor is over is not highlighted for selection until the cursor is move some distance off the item. This makes it difficult to pick items that are near each other since some other item may be slected instead of the one you are over.
In Creo View, there is currently no way to invert the mouse wheel zoom functionality in a similar way to that of Creo Parametric's config.pro option use_inverted_mousewheel_zoom. In both Creo View and Creo Parametric, by default, scrolling up on the mouse wheel zooms out, and scrolling down zooms in. With the functionality inverted, scrolling up zooms in, and scrolling down zooms out; similar to the way zooming works on Google Maps. It would be great if this inversion option was available in Creo View; especially when going back and forth between Creo View and Creo Parametric. Below is a link to a PTC support article about this topic. https://www.ptc.com/en/support/article?n=CS272407
Hello @ all, Please think of the following scenario. You have a really large assembly opened in Creo View, containing some explode states (approx. 20). Now you select one of these and something happens, but you can not see it on the screen because it is either very small compared to the entire assembly or inside. Now you need to find the geometry which this explode state is vonnected to and controling, to isolate it and make this visable. Thsi needs to be done manually. What about a commant in the explode fly out or on the RMB mnue to find the referenced geometry in the obejct tree? About your opinion? Any feedback is welcome. Regards Thomas
As we continue to expand our usage of Creo View across the company, more and more groups are consuming and editing the viewable data. As more groups use it, Annotation Sets are being created and stored in Windchill. If you are familiar with the software you may know to check the Annotation Sets tab from time to time. However, if you are a new user, you may not be aware of this. We would like to see a way to either change the default behavior of Creo View to, on open, choose which tab is selected by default (Annotation Sets over Structure, Viewables over Annotation Sets, …) depending on certain administrative or user preferences. It would also be helpful to have visibility to Annotation Sets, perhaps via a mini viewport, no matter which tab is selected.
When creating an exploded figure in Creo Illustrate, and you move a component, you should be able to select another component after moving and placing the first one and allow it to copy the offset/distance/rotation that the first component was moved. Creo parametric allows this, and its is a huge time saving feature.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.