Recently active
When designing using a multibody approach, sometimes we are designing bodies that get visually obstructed by larger bodies. We could hide the obstructing body, to visualize the "internal bodies", but sometimes we need to quickly switch between hiding and showing the larger body, or we might need to visualize it, but nevertheless do not consider that larger body for any modeling operarions, but its geometry gets always in the way, having to constantly query select to select the smaller internal bodies. Since each project can have any number of bodies, and with any name, it's not easy to create a mapkey to achieve this goal. So, I suggest that at least the construction bodies (and eventally all of them) should have an attribute or an assigned parameter that classifies them as "Visualization only" to avoid letting them to be selected, even though that are displayed. This would tipically be displayed in a light transparent shaded mode, or even only in wireframe mode. In the 2D drawings, th
Hello, In Simulate, can we display multiple graph lines into a same result graphic? Example: I have a model with 10 measurement points. In dynamic study, each measurement point calculates an RMS constraint at a point of the model as a function of a frequency (over a 0-20Hz range for example). I get the following graphs. It is quickly unreadable ... If we could put the 4 on the same chart it would be better (and again, there are 4, imagine with 10 ...) Thank you for your help or for enhancement if possible,
What settings in CREO would allow me to fast navigate a BIG assembly? Any secrets any tips will help. EXISTING is frame by frame slow movement of the assembly. Thanks in advance for your reply.
When copying the default simple_drilled.hol file into hole file location which is set by the config option HOLE_PARAMETER_FILE_PATH, I get a format error once I use the hole command to create a hole. The error is:Format error in fastener input file : N:\AMG File\AMG CAD ROOM\Creo Library\Hole Files\simple_drilled.hol at line no: 8 The only thing I changed on the default file is PRO-VERSION to 24 from 25 because I would get a fatal crash and remove the ! to un-comment the DEFAULT_CALLOUT_FORMAT_DATA section as shown here: HOLE_TABLE_DATAPRO_VERSION 24TABLE_TYPE SIMPLE_DRILLEDCALLOUT_FORMAT DEFAULT_CALLOUT_FORMAT_DATAHOLE_TYPE DRILLED_DEPTH CSINK CBORE EXIT_CSINK CALLOUT_FORMATSIMPLE_DRILLED VAR YES NO NO DRILLED HOLE &DIAMETER &VAR_DEPTH &DRILL_DEPTH I have tried all kinds of combinations to try to figure out the format error. PLEASE HELP!!
1. Describe the ProblemHi,the tool path of volume roughing sometimes works from the outside to inside (correct) and other time as opposed to or alternate.in these two videos I use the same volume roughing sequence, the only difference is the size of the volume extrusion.First video the tool path is correct. (function() { var wrapper = document.getElementById('lia-vid-6363736141112w658h540r271'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos) (function() { var wrapper = document.getElementById('lia-vid-6363738470112w660h540r728'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs
1. Describe the Problem The dimension for the increment of a pattern is entered with 6 decimal places.The dimension is displayed with 3 decimal places. (option default_dec_places 3)When editing, the dimension is displayed with 6 decimal places.So far, everything is correct. The pattern is redefined into a table pattern.All dimensions are rounded to 3 decimal places, meaning that values are unintentionally changed ☹️2. Are you using a workaround?No3. What is the use case for your organization?Decimal places that were originally entered should be preserved in pattern tables. No automatic modification of dimension values by Creo.4. What impact does this problem currently have on your organization?Wrong values in pattern tables.
1. Describe the Problem Attempted to select more than 40 reference surface then selected the measure tool to calculate the surface area. The resulting error suggests references are limited to 40 selections. 2. Are you using a workaround?No. Attempted workaround by copying the selected surfaces but this is also for some reason not allowed. The model is an assembly and for no good reason you can not select and copy surfaces from multiple parts in an assembly in a single feature. I am attempting to calculate the surface area in 40 reference groups but this is a terrible way of doing it and very time consuming.3. What is the use case for your organization?We need to select surfaces to find the surface area.4. What impact does this problem currently have on your organization?This issue is preventing me from completing area calculation for critical testing. At this point I have wasted about 3 hours trying to find a workaround.
I'm working in an assembly in Creo 7.0.2.0, and I am trying to determine the interference between two objects. I want to determine the distance between the two furthest points of each object to determine how much they are interfering with each other. I found the "Pairs Clearance" feature that lets you select two objects, and it will show you the clearance between the two closest points of each object. I was wondering if there was a feature that did the same thing for interference parts, so I can determine the extent of how far the two parts are interfering. I have tried the "Global Interference", but it just outputs a volume and not a distance. Does anyone have any more experience with this? I am somewhat new to the "Analysis" tab and have only used it for measurements and mass properties.
Looking for some helpful tips on when to use bodies and not to use bodies. We moved to Creo 10 recently(from 7 i believe?). Creo 7 had bodies but it wasn't something i was really interested in learning then. Seems that Bodies have come along way in the 3 generations(and even more in 11). Looking to get feedback on how you use bodies in your daily part modeling/assembly work? Things i've started to do now at the part level instead of the assembly level:Dowel PinsI'll model the pin at the part level now and assign it as a body(can xhatch it differnetly at the drawing level). I no longer need to have an assembly created for these. This also makes GDT much easier at the part level instead of the assembly levelThreaded InsertsI'll either model a helicoil myself or do Get Data -> Import and import a threaded insert as a body into my model(assembly via csys). Much easier to handle the drawing this wayI think i might do some plug welds for cross
1. Describe the ProblemEnhance Import Validation Properties for the CREO CATIA V5 translator to read in source mass property values for detailed comparison to the Creo imported mass property values.2. Are you using a workaround?We do the comparison manually using CATIA and Creo3. What is the use case for your organization?We need this to help us Identify volume discrepancies with our imported CAD data4. What impact does this problem currently have on your organization?Its hard to do the comparison and sometimes users are unaware of the discrepancy
Current Status:The dimension for the increment of a pattern is entered with 6 decimal places.The dimension is displayed with 3 decimal places. (option default_dec_places 3)When editing, the dimension is displayed with 6 decimal places.So far, everything is correct. The pattern is redefined into a table pattern.All dimensions are rounded to 3 decimal places, meaning that values are unintentionally changed ☹️ Enhancement request:Decimal places that were originally entered should be preserved in pattern tables. No automatic modification of dimension values by Creo.
While converting the drawing to PDF, I have multiple sheet sizes (A0, A1, A2, A3, and A4), and for all these sheets, I can only assign one pentable.pnt file in configuration, but the line thickness is not the same for all sheet sizes; the lines are not visible if I use the pentable setting used or an A4 sheet for A3 to A0. Need suggestion...
Hi everyone,I am new to Creo Web.Link and currently working on automating the process of adding dimensions to a drawing view. My goal is to:Check if the current model is a drawing.Allow the user to select a view in the drawing.Retrieve model annotations (dimensions) from the selected view and display them.I am trying to use the Web.Link API, but I am facing issues with retrieving and displaying the dimensions. Here’s the function I have so far:function addDimension() {if (pfcIsMozilla())netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");try {var session = pfcGetProESession();var drawing = session.CurrentModel;if (drawing.Type !== pfcCreate("pfcModelType").MDL_DRAWING) {alert("Current model is not a drawing.");return;}alert("Drawing detected. Please select a view.");// Allow user to select a viewvar selectedView = drawing.SelectView("Select a view to retrieve dimensions:");if (!selectedView) {alert("No view selected.");return;}alert("View selected: " + selectedView
I am using Creo Simulate Release N/A and DatecodeN/AHello,We currently have a Creo Design Essentials license installed on the host ID WIFI A8-64-F1-1A-D7-13, which is set to expire soon. Therefore, we would like to remove this license and replace it with the one currently assigned to host ID F8-75-A4-F4-DA-89.Could you please proceed with transferring the license from F8-75-A4-F4-DA-89 to A8-64-F1-1A-D7-13? Additionally, could you confirm that the user currently using A8-64-F1-1A-D7-13 will not encounter any issues when reinstalling the license after the transfer?
Currently, the Undo/Redo stack in the Creo Parametric session seems to be cleared when calling any Creo Parametric TOOLKIT functions and this specification causes inconvenience or even barrier for users of a Creo Parametric TOOLKIT application depending on the usage of TOOLKIT APIs. There is a note in a Creo Parametric TOOLKIT User's Guide as below: --- All Creo Parametric TOOLKIT calls running in either synchronous (DLL or multiprocess) mode or asynchronous mode always clear the Undo/Redo stack in the Creo Parametric session. The Creo Parametric user interface reflects this by making the Undo and Redo menu options unavailable. --- In one of Creo Parametric applications using TOOLKIT APIs, we are creating a thread to capture model view matrix using ProViewMatixGet() at regular time intervals in order to synchronize model view with other CAD application. In such usage, users can not use undo/redo for any operations done in Creo Parametric due to this specification.
I am not able to drag up the green line at the bottom of an assembly tree or part features. Nor am I able to drag independent features or parts up or down a tree. I can see the "hand" when I put the pointer on the line, when I left-click the mouse the hand closes, but if I want to drag it, a red stop sign (red circle with line across) appears.Anyone an idea why this is happening? I can use the "Insert Here" option, but dragging the line is much simpler.thank you!Norman
Here are 3 basic examples of Mechanism Dynamics
Hello:in the drawing view display style set to hidden line style,we want use toolkit API get the part edge display status,hidden line or solid line,how to get the solid edge status in the drawing view? thank you.
Hi, I opened creo parametric M110 this morning and can't seem to get the embedded browser and Windchill to work. I can connect to Windchill and open parts, just not through the browser. In fact, the browser window is there but stays on on a blank white page. So "workspace" and "windchill cabinets" buttons don't work and neither does manually typing in any web url. I have tried switching between ie and chrome in config, nothing seems to work though. Thanks
Check out this video on PTC Creo Tips & Techniques: "Simplifying Models For Downstream Use" by Mark DeCraene, Principle Solution Consultant from PTC. Also, a quick word from our partner Sigmaxim and their tool Proxy Builder for Simplification. (view in My Videos)
I have a drawing with 3 sheets. somewhere along the way the second sheet has become corrupted and the drawing will no longer publish. i can activate/modify sheet 1 and 3 but if click on sheet 2 the program stalls and i'll have to close it out. I'd like to just delete sheet 2 and re-create it but i don't know how to do it other than right clicking and selecting delete. but right clicking it will navigate it to that sheet and then it'll freeze on me. Help?
I would like to be able to design tubes in Creo Parametric that will be 3d lasercut (to an angle of max 45 degrees).When I convert a body to sheetmetal, sidewalls are made perpendicular to eachother automatically.There are some workarounds to have angled sidewalls in sheetmetal but is it possible to have sheetmetal not do this automatically? I still need the unbend/bend back function in sheetmetal or I wouldnt use it at all for tube design.
Hello, does anybody have UDL files for editing Pro/Program and Relations with Notepad++? I've already set the config option "pro_editor_command" to my Notepad++ installation path (to use N++ instead of Notepad.exe) and I was wondering if anybody has already uploaded UDL files somewhere. Thank you in advance. Old Topic for reference - https://community.ptc.com/t5/System-Administration/Notepad-User-Defined-Language-files-for-Creo-Parametric-and-Pro/m-p/451745#M6999 And thanks to @DomenicLaritz for sharing the UDL files for config and .dtl files!
I followed the PTC tutorial to assemble the piston and seal ring, and after completing the three assembly constraints required for the piston ring assembly according to the steps, it prompted "incomplete constraint"?I said I followed the official tutorial, why is the result different from what is displayed in the tutorial?Can someone try assembling it according to the tutorial to see if the results are the same as what I got?Thank you!The tutorial can be found at the following link:活塞装配 (ptc.com)
With the search tool I would like to select all the components which have for designation_1 = "CAISSON" But I can't find the category ...
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.