Recently active
I'm a longtime Creo user (from Pro / Engineer 16) and a former PTC employee. I would like PTC to invest in the renewal of the Cabling interface and workflow that I think are definitely dated. It is not possible that in 2020 this module still has a strong presence of the old hierarchical menus it had in the old Pro / Engineer (especially with regard to the harness part). While up to the Mid 90's was understandable the massive use of these hierarchical menus (due to the lack of power of the graphical cards), now it makes no sense. As PTC is pushing towards the augmented reality that needs a Digital Twin, this Digital Twin should be easily built by designers even for the Cabling / Piping point of view. If PTC wants to continue to be a market leader in the MCAD sector, must not only develop new "Wow" technologies (such as topological optimization, for example ...) but also invest a part of the new subscription model revenues to update and improve its fundamentals without which ev
1. What version of the software are you running?Creo 9.0.5.0GD&T Advisor 6.2.2.30 2. What is the problem?This is an improvement proposal for GD&T Advisor.To improve user experience, and to better select annotations (after tolerance features are created) the selection should automatically switch to "Annotations" and not to "Geometry" or "Surface".• Already existing behavior: Starting creating tolerance feature, it switches to “Surface” (this is correct).• Missing behavior: After creating a tolerance feature, it should be switched to “Annotation”.This is currently not the case. Annotations that are placed in front of the model cannot be selected. It is necessary to set the selection filter to "Annotations" manually each time. 3. Are you using a workaround? If yes, please describe it.No workaround available. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Standard designe
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.0 2. What is the problem?Reference: Ticket: 16990778 Creo View ECAD allows cross-probing between the 3d model, schematic, 2d pcb drawings, etc. See https://youtu.be/ocWmVC4RnuY?si=ScnAWhVHPOhWyHh7 as a reference. This is great. However, the tool is under the assumption that every 3d component is modeled as a part. This is just not the case. In fact, over 90% of our components are modeled as assemblies, so we can manage different AML/AVL sourcing geometry within the component. Now, if a user selects a part from this assembly in the graphics window, cross-probing won't work. It needs to be selected from the model tree instead. However, the average user doesn't realize this limitation and believes there is an issue and the tool doesn't work. Some believe we shouldn't even use the tool if it can't do what it advertises with the cross-probing. Please all
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.8 and creo 9.0.52. What is the problem?user friendly during working in part mode with simplified representationinsert bar and delete feature is not permittedIs working to spec but this request will modify user experience: More friendly3. Are you using a workaround? If yes, please describe it.Activate master representation if you want use insert bar or delete feature4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.During their works users would like to use delete and insert here to save time5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)lost productivity - 20-> 30s per userRegarding the number of user the time saved is 1.5 hour per day
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 8.0.8.0 2. What is the problem?Reference: Case: 16812905 SPR: 14566231 Most of our products we design include PCBs. Therefore, ECAD MCAD Collaboration standards are critical for us to work efficiently and quickly. When the PCB team revises a design (like removing or swapping a component), the mechanical engineer needs to evaluate it and make sure there are no interferences with the mechanical design. Since the assembly is getting revised in our ERP, the assembly in Windchill is getting revised. However, there are many times when the raw board itself is not getting modified. Therefore, in Windchill, it is still released. If we update the assembly with the new EMN file from the PCB team, Creo will flag the raw board part file as modified. It shouldn't! There is no feature or functionality that requires the part to be modified. For custom
This should have never been archived why has this not been implemented in the last 11 years?Status: Archived Submitted by JonathanHodgson 11-Garnet on Jun 20, 2012 12:01 PM 3 Comments (0 New) Mechanica (sorry, Creo Simulate) is becoming increasingly capable of handling large, complex models. However, its use is limited by the ability to simply, quickly and clearly enter and manage large numbers of loads and loadcases. It would be useful to have the facility to enter loads in a tabulated form, ideally with seamless editing via Excel or similar. This would make it easier to enter review a large number of different loadcases, and thus reduce the likelihood of mistakes as well as saving time setting up the model (as only one load would be needed for each interface feature). At present, applying different values for each of a set of loads for multiple loadcases results in a very crowded screen, where it is nearly impossible to see the value of each load and difficult to select the correct
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Machine automation. Admin for Creo and Windchill. All Windchill users within our organization. 2. What version of Creo Parametric are you currently running?8.0.4.0 and Windchill 12.0.2.0 3. Describe the problem you are trying to solve. Due to the HUGE system/performance benefits of Inseparable Assemblies in a Windchill environment, we would like to have the ability to default to Inseparable Assemblies when importing STEP files. This would require 2 changes: Add Import as Inseparable assembly to STEP file import menu Add a config.pro setting to allow choosing Inseparable Assembly as the default. 4. What is the use case for your organization?We get STEP files of customer data that can contain 100's or 1000's of parts, and since we reference their data in our machine design we often want to check this data into Windchill. TWICE in the last month we had
I can't believe this isn't part of modelcheck. There is a check that looks for missing references for Annotation Elements, but NOT for missing references within normal features that are internal to the part itself. I have a case where a user created a hole in a sheetmetal part that went to a depth that referenced a surface. Something happened and that surface no longer exists.ModelCheck doesn't flag it.There are no regeneration warnings or errorsFull regeneration works fine.YET...If you redefine the feature, you can't press the green check to complete the feature without fixing the missing reference. Also, if your design intent changes, the feature will not update properly...And this isn't in ModelCheck (or a warning in the message window).Any chance we can get this added sooner than later? Users are releasing models with missing internal references!
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 82. What is the problem?Because managing the proper sorting of BOM on drawing is not intuitive most user do it differently. Which is prone to error when a different user updates a drawing. It also cause issues if an item number was referenced to in the notes and the BOM is automatically reordered after an update in the assembly.3. Are you using a workaround? If yes, please describe it.The workarounds are highlighted in the following post from the community:https://community.ptc.com/t5/3D-Part-Assembly-Design/Changing-BOM-to-be-in-order-of-assembly/m-p/765222/highlight/true#M1222004. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Here is the dream:By default (or less ideal via a config option) the BOM on drawings is sorted following the order the components are showi
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.General machine-building - Manufacturing Engineering / Production Preparation2. What product and version are you currently running?Creo Illustrate 9.0.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In Creo Illustrate, it is possible to search for a component only by its name or its part, or by the content of a parameter. It would be useful to improve the search similar to what is done in Creo View - i.e. add the ability to search by the value of a specific parameter or be able to create more complex queries.4. What is the use case for your organization?Faster search for components by parameters, for example a spare part.5. What business value would your suggestion represent for your organization?Better use of existing information in 3D models, reducing the risk of human error, improvi
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.The organization where I work is in the manufacturing industry.In the organization I am responsible for the CAD and PDM system administration.I support about 800 Creo View users (and 300 Creo Parametric users). 2. What product and version are you currently running?We are currently working with Creo View 8.1.0.0 (and Creo Parametric 7.0.9.0).3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.In Creo Paramteric it is very easy to dimension the distance from a line tangential to an arc: (function() { var wrapper = document.getElementById('lia-vid-6316147879112w1006h540r268'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-prog
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.12. What is the problem?Creo View does not have a query selection as Creo Parametric. It is only possible to select geometry (faces, edges,...) or components that are in the line of sight.3. Are you using a workaround? If yes, please describe it.Only workaround is to hide components, rotate and zoom models and select the required reference. This takes a lot more time than it should.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It should be possible to select geometry (faces, edges,...) or components other than the ones in the line of sight.It should work like in Creo Parametric: Put your mouse cursor on the top of the geometry > Click right-mouse-button > Geometry beneath the mouse cursor should be preselected and available for selection.This would make m
Please include detailed documentation such as screenshots, images or video.Additional View is a very useful improvement when positioning models quickly.But when you want to position a model that includes a coordinate system, you always have to switch on CoordSys in the view settings of the additional view. Modeling should remember this setting and it should also be possible to set this setting in the sd_customize file.1. What product and version are you running?20.3 to 20.52. What is the problem?Modeling does not remember the view settings for additional views and it is also not possible to set view settings in the sd_customize file for the additional view.3. Are you using a workaround? If yes, please describe it.Modifiy view settings every multiple times.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Positioning roboters or other models containing coordinate systems.5. What impact does this pro
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo+ Portal and PTC Admin Center2. What is the problem?When creating descriptions and titles/names, only the following characters are allowed:A-Z a-z 0-9 . _ - " ( ) and spaces.Other symbols such as:& (ampersand-symbol). (point-symbol), (comma-symbol)... are not allowed.Example: 3. Are you using a workaround? If yes, please describe it.Replacing the symbols with their equivalent words, making sentences unnecessarily longer.For example this description for a Profile or a Group is invalid:Requires the Design Advanced, AAX & TOOLKIT licenseand has to be changed to:Requires the Design Advanced together with the AAX and TOOLKIT license4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This is a minor thing that, if fixed, would improve the user experience of the portals
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry = mechanical productsRole = 3d technical Illustrator/ animator2. What product and version are you currently running?Creo Illustrate 8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Products are now universally full of electronics. Many illustrations require exploding out or moving components that are attached with cables. Cables created in creo parametrics are rigid and cannot be stretched out in illustrate to keep them connected at both ends to their respective parts during exploding.I have to create cables for these illustrations in Blender and import them into illustrate. This process is the fastest I have found but involves extra work, exporting the parts needing cables from illustrate, importing into Blender, creating the cables in Blender then reimporting them into illustrate
1. We are using Creo Illustrate 8.1 linked to Windchill 12.0.2.12 2. We want to be able to create an automatic numbering with an increment ten by ten.But all the buttons aren't accessible when Illustrate is linked to Windchill MPMLink.3. There is no workaround for it, we are completly blocked.4. Our main usecase is concerning the Customer Service for all the brands of the group, The numbering ten by ten corresponds to the line number in the Bill of materials. The goal is to generate a SVG file from Illustrate with the callouts and reuse this file in the Customer Service Portal. By this way we will be able to maintain the digital chain from the design to the CS. 5. For the moment it's an improvement that we imagine but it can give benefits for all the people who are working in the CS departments in all our brands of Richemont.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?We are using Creo 8.0.8 with Windchill.2. What is the problem?Every time we want to export PDF the default viewer opens and it bothers.3. Are you using a workaround? If yes, please describe it.Not a workaround. I simply open the PDF setting and I flag out the setting.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It's a very simple improvement, a kind of thing that you expect from a program where practically "all" is configurable from config.pro5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Small
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.12. What is the problem?Unable to control the font type and settings in callouts3. Are you using a workaround? If yes, please describe it.no workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In version 10, the ability to choose a different font other than Aerial was added but this is for the illustration. I would like this to be expanded to allow different fonts in callouts and to have the ability to make fonts bold, etc. Similar functionality is availably in Creo Parametric.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Since we use Illustrate for shop drawings, it would be nice to have more flexibility with the fonts when creating notes, etc. We currently have about
Please include detailed documentation such as screenshots, images or video. 1. What product and version are you running?Creo Parametric 7.0.102. What is the problem?Colour appearances can be cleared by several ways, but they are limited. E.g., a certain colour appearance can be given to multiple geom. entities and of course removed by selection. As I know, it is not possible, to unset a selected appearance, yet.Of course, remove all and reassign may work but it can be very time consuming. 3. Are you using a workaround? If yes, please describe it.Remove all and "repaint" selected entities.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Please refer to picture above.It would be great to have some enhancements similar to variant 1 or 2 or both.Variant 1 starts from right mouse action on existing appearancesVariant 2 would be a new command in CLEAR APPEARANCE-dropdownThe goal is to remove
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Running a macro with OTK J-link for Creo Parametric 9.0.42. What is the problem?The code I am running needs to activate a simplified representation that contains a flat pattern of the sheet metal part. However I am not able to activate the simplified representation that is owned by the part in an assembly, This is to be able to get certain properties from the sheet metal part, like bend quantity and the size of the sheet metal when it is flat.3. Are you using a workaround? If yes, please describe it.The workaround I have can only do the bend quantity by looking at the detail note items and cannot get other features that will be very helpful for the sheet metal department.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The Idea would help give more details and properties of the sh
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?An OTK Free TOOLKIT JAVA J-link macro for Creo Parametric 9.0.42. What is the problem?With a 3D note attached to a surface, It would be good the then get the text of that note and then the surface or edge properties of what it is attached to, like the surface area or length of those features. 3. Are you using a workaround? If yes, please describe it.We have discovered no work around4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This would be really helpful for getting certain features like bend edge length or certain surfaces that are external or surfaces that need linishing. These features will be then used for costing the part as if bend lengths are above a certain length it will need two people to support the part which increases cost and other features that can be evalu
When model display changes to shade, we can not see the thread surface. So, it is difficult to understand the hole has a thread or not. It is good to set a special color automatically to the hole cylinder surface when it has a thread. This is implemented in Solid Edge.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I'm working in the metal mechanic sector in the North of Italy in a company that counts 60 people and 20 coworkers in Italy.I'm the office manager of a 8 people in the Mechanical Departement.We sell automatized wharehouses and transport systems to pharmacies, hospitals and dealers.2. What version of Creo Parametric are you currently running?We are using Creo 8.0.4 with Windchill.3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We changed tha CAD last year. Before we used Solidworks 2020.I want to suggest a little improvement: the possibility to open a part from an assembly with the same orientation that this part has in the assembly.It is simply very useful in each kind of situation. 4. What is the use case for your organization?There isn't "a use case" because it would be useful everyday
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?We are currently using Creo View 9.0 (and Creo Parametric 7.0.8.0) while connected to Windchill 11.2. What is the problem?When opening a native Creo Parametric file (PRT or ASM) in Creo View, there is only few parameters of the model that are retrieved.All Windchill and Creo Parametric parameters are missing meaning that we can't retrieve the material nor the surface treatment (along many other parameters) which is crucial information.3. Are you using a workaround? If yes, please describe it.The only workaround possible is, prior to sending the file, converting it in PVZ. But only someone with Creo Parmatric is capable to do so.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Users open native .PRT files in Creo View and expect to have a complete model including all the parameters
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0 and Windchill 12.0.22. What is the problem?Our parts and documents are numbered using autonumbering. In Windchill it is no problem finding the right components. In Creo there are multiple situations where engineers miss the descriptive information to be able to easily select the right component directly from Creo. - modeltree- layertree- file open (the search field only searches in the name)- assemble- define simplified rep (column definition can not be stored)- save as (to STEP, dxf, etc.) In Creo View it is possible to configure alternate part names. If this function is also possible in Creo, this would greatly enhance the user experience. 3. Are you using a workaround? If yes, please describe it.We have various configurations and workarounds to help the users- defining extra modeltree columns by default- first find the component in Windc
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.