Recently active
Hello,I am attempting to scale an item I received from an outside source but whenever I try to use the Scale Model function, the assembly/part does not go under any changes. Is this because the item should have definitions within it, such as sketches to transform? The item I received had no internal sketches or dimensions, so I wonder if that is the cause? For reference I am looking to save the nominal item to a proportionally smaller size and I am on Creo 8.0.11.0
I am having an issue where routed cables are offset from the single connector entry port instead of centered around it. Is there a setting that controls this? I don't recall this ever happening before and after many tests it seems to be most pronounced when using multi stranded cables (twisted pair shown in the attached image). This is producing some unwanted artifacts when moving into drawings and flat manufacturing harness.
How do I recover a Creo Schematics Design? Creo Schematics frequently crashes and when I try to reopen the design I was working on, I receive the error below. In File>Environment I have "Automatic design backup" checked and I set "save design information" to every 20 operation however the autosave folder for each project is always empty. It does show that a recovery file was created called recovery_9-11-2023_15-16-0.rcv but I don't know how to open it in Creo Schematics. I am using Creo Schematics version 8.0.0.0.
I am trying to display wire endpoints in a section view of my cable assembly & only the centerline will display, Even when I exclude the harness.prt from the section view in the model it only appears when it is not behind a sectioned area. Everything I find online suggests: Drawing View → View Display → Cable Display→Thick but that does not resolve my issue. Any help is appreciated! Thanks
Hey all, another what could be just a simple question. I have to insert 45 degree angled lines quite often and the only way I know how to do it is inserting a line close to 45 degrees, adding a dimension, then clicking and dragging the one end of the line to as close to 45 as I can get. 45 degrees doesn't need to be exact in this application but is there any way to do it easier other than adding a symbol or the way I'm doing it currently?
Hello, I want to create Geometry simplified representation by Creo 10 (I have very huge assembly and I do not need info about nested features/geometry from subassemblies). In the past in old Creo, was possible to create Geometry simplified representation. In Creo 10 I have found option: simprep_default_model_status graphicsbut is not working. When I create new rep, system always create only Automatic representationAny ideas how to make Creo faster for huge assemblies?Thanks, Vladimir
1. Describe the ProblemThere is no event before a creo file is loaded. The event should be triggered for each model before it is loaded, including each component installed in an assembly.2. Are you using a workaround?no workaround3. What is the use case for your organization?Check whether the corresponding model is still current/valid. Real-time detection of which models are loaded.4. What impact does this problem currently have on your organization?no solution available
When creating/editing annotations in Creo Illustrate, there is no option for defining the font to be used. You can only specify the Font Size and Font Colour as shown: According to PTC Support document CS116109, the default font of Arial is the only option. It would be much more flexible if users in Creo Illustrate could: Define a default font to use in the Creo Illustrate Options dialog box. Change the font for individual annotations.
I'm trying to apply a thermal load to simulate a bolt preload (a similar technique as it used to be done in Pro/MECHANICA) in a simple two plate model. To model the bolt I made a beam idealization that connects two rigid links at the bolt ends (one for the head and the other for the thread). I created a global material for the plates with 0 [1/°C] thermal coefficient and then another material for the beam with 1.2e-3 [1/°C]. For thermal loads I'm using a temperature load increase to 100C and fixing the rigid links. After that, I run the static analysis but nothing happens. This is the first time I'm attempting this approach for bolt modeling, I'll appreciate any help to understand what I'm doing wrong. Attached is the zip file with the assembly and creo parts for reference as well as an image with some description labels.
HiTrying to establish the correct way to layer mechanisms within assemblies for a driveshaft/uni joint setup.I have found a few ways that make it work, however they all seem a little cumbersome. What i currently have is 3 main assemblies 1. Input containing a yoke with a pin constraint2. Output containing a yoke with a pin constraint3. Driveshaft with sub assemblies - universal joint with pin constraints - driveshaft with a slider constraint When assembling these im assumining that i should be using a rigid constraint to put the driveshaft assembly with 2 sets to attach to the Input/Output shafts, however this does not want to work for me. Should i be assembling the driveshaft into the main assembly as a mechanism also? or nesting this differently? Also within the Uni joint, Should the cross be the default with the caps all allowed to rotate? or one set of caps fixed and the cross & alternate caps be allowed to rotate? Its seeming
In Creo Schematics 11.0, when placing a Block shape on a block diagram sheet first, run a report, select place artifact, and then place the Wiring shape on a wiring diagram sheet, the software does this properly. When you have a wiring shape placed first, and then place the block shape next, the software does not show the block shape of that artifact. Only the label is displayed, but the shape's outlines are not displayed. I can click and drag/select the artifact and the properties can be seen in the parameter panel. I have tried updating all sheets, restarting the program, but still does not display. No Error is displayed.Not sure if this has anything to do with it but when I look at J1(NO GOOD) and J2(GOOD) in the model explorer, J1 does not have the 2 block ports (for this shape the ports are named BLOCK and MATE) but J2 does.
Hi all, I think I discovered a bug in Creo. I am trying to follow this tutorial. Hide the sketch from one drawing view and keep it visible in another drawing view in creo parametric However, this method only works when I hide the sketch in the Model. If it is showing in the model, then the exported PDF shows the lines as well. Also I have tried matching drawing properties as in the video. See in above image, 'PRT_ALL_CURVES' is hidden, but it still shows. for some reason it doesn't matter if it's showing or hidden on the drawing, the model overrides what the drawing exports. If I export the drawing with the model hiding the sketch, then there is no issues (except that the drawing still shows the sketch, it just hides it after exporting which is also extremely confusing/frustrating). Thank you,Jeff Houston
Is it possible to establish an asynchronous connection to another host running Creo? The functions used are ProEngineerConnect & ProEngineerConnectIdExtract & ProEngineerConnectIdGet.The test with the tool nmsq.exe on another host fails:nmsq.exe -host MARVIN -queryERROR: NMS client: could not connect to the Name Server. (host MARVIN, port 31239)on the local host the tool is successful, but only if the hostname is specified, with the ip it does not work locally either
We've been having a problem lately with assembly drawing x-hatching not looking correct after save-as to PDF. This seems to have happened since maybe CREO 9, possibly earlier. But it seems to get worse with each release. It starts out with an assembly drawing with x-hatching. It looks fine. But when we save-as to PDF, the x-hatching looks messed up. I have attached some screen shots of the PDF showing x-hatching not looking correct. This is not the only drawing it happens on. It happens Currently using CREO 10. Thanks in advance.
1. Describe the ProblemWhen we assemble a Creo Elements/Direct Model in a Creo Parametric assembly via unite we do not have points, axis, planes or coordinate systems in the Modeling Object to define placement constraints.2. Are you using a workaround?We have to create Creo Parametric Models as a clone of the Modeling Object with the relevant datum objects. In case of a change we always have to change the Modeling and the Creo Parametric Model.3. What is the use case for your organization?We want to use the existing standard parts (Modeling objects) in Creo Parametric. The placement should be defined using datum objects like coordinate systems planes or axis.4. What impact does this problem currently have on your organization?We have to clone all the Modeling Objects to Creo. In Windchill we have a 3D Modeling model and a 3D Creo Parametric model linked to the WTpart. In case of a change we have to change both model types.
Hi All, We are looking at a possible new opportunity for PTC engagement in CATERPILLAR Solar business. We would like to connect with the PTC team to understand the following: Creo and Windchill IntegrationElectrical Schematic and P&ID linkagePanel Wiring Automation We request if we could connect with the PTC team to discuss these topics. Eagerly awaiting the community's response. Thank you. Regards,Akhil ChallaSimulation Senior Associate EngineerCATERPILLAR
Hi, I encountered an issue when I tried to insert a note to our drawing. When we are using the same drawing for different project, I like to create a "stamp" like note on the drawing to indicate which project this drawing is used for. With the following code, I can set font height but cannot change the font. Although notestyle.getfont confirmed the font was applied, but when it showed, it reverted back to default font "Arial". Did I miss anything? note = drawing.CreateDetailItem(noteInstructions) noteStyle = (New CCpfcAnnotationTextStyle).Create() noteStyle.SetHeight(FontHeight) noteStyle.SetFont("ARIALN.TTF") note.SetNoteTextStyle(noteStyle) Console.WriteLine(noteStyle.GetFont) note.Show()
I try to understand, why, in Creo 9.0, the the sketching, the Project have been changing. The new way to select the line to project is longer to work with it. In the past, we chose Sketch Complete loop, and we chose each line one after the other. Now, we have to chose one line, chose chain, then chose the Rule-Based, then the rule we want, ok, and to finish to tell the command that we want to create the geometry... A work that will normally have taken maybe 30 minutes to extrude in solid a dxf file send by my client, will surely take a few hours.
Hi Everyone, I am new to Creo View and trying to achieve the same in Creo View 10. Does anyone have a documentation link to do the same job viz, embed a Creo View control object to Any office Application? I do see that we have adapters/ Creo View toolkit for Office. But I am not sure where o start. Any links that can point me in the right direction would be helpful. Reference topic: https://community.ptc.com/t5/Addtl-Creo-Products-View-Sketch/Using-Creo-View-models-in-PowerPoint/m-p/450791#M469 Thanks RM
Hello erveryone, I think it will be very usefull to add the possibility to manage the font of the annotations, and for any fields with text. Thanks, BR
Adding transparency to the color, not adding it after when viewing the Cad Part, but to define it in the color itself with a percentage. Fot now it can be made as you click on the cad part itself, but not as an option on the color Palette to choose.
Reference: Case: 15627024 SPR: 11198253 Currently, if you set the config "show_geom_checks_on_creation", it will only popup a warning message when the feature is FIRST created. However, if there is no geometry check when it was created, rather the geometry check got added later during an edit definition, it does NOT inform the user via the option popup. R&D says that all new development work for notifications should really be to the new Notification Center. Therefore, this 'idea' is to have the Notification Center flag geometry checks, regardless of when or how it was created. I would like to add that there should be an option which differentiates between notifying a user in the assembly; whether the geometry error occurred within a part or via an assembly cut. I would prefer if people weren't notified about a geometry check for a small piece of a car, if they are working in the car assembly. However, if they are working in that part, then they SHOULD get th
The current method of cuts as assembly level features drives a lot of issues when dealing with complex bill of materials. When an assembly cut is made, a feature is added to the piece part level after regeneration. This causes the actual change of the geometry (whether it is adding a hole, etc.) to occur, in the model tree, way before the actual assembly feature is located. This causes changes to feature id's, etc. that impact the assembly features higher in the model tree. For example, if you create a Creo Solid Weld in an assembly, then create a machining cut after the weld, which might reflect the real life order of operations, that cuts through an edge or surface that the weld references, your weld will either fail or have a portion of the weld disappear. The work around is to create a copy of the surface or edge at the piece part level that the weld can reference. This copy exists before the assembly level feature is added to the piece part, so it is not impacted. I do not
The symbols located at <loadpoint>\symbols\report\bomballoon do not meet our corporate drafting standards, and there is no method for customizing these beyond overwriting the existing symbols in this loadpoint location. There should perhaps be a config option to allow us to point to our own custom bomballoons for this purpose, without being forced to alter the Creo Parametric loadpoint. See Article - CS23593 - How to set custom reference BOM balloons in Pro/ENGINEER and Creo Elements/Pro (ptc.com)
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY THAT CREO ASK US WHILE COPY THE BODY AND PASTE IN THE SAME Your reply is very valuable for me
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.