Skip to main content
Jan 12, 2021 2:41 PM UTC
Archived

Issues with current implementation of assembly level features

Related products:Creo Parametric

The current method of cuts as assembly level features drives a lot of issues when dealing with complex bill of materials. When an assembly cut is made, a feature is added to the piece part level after regeneration. This causes the actual change of the geometry (whether it is adding a hole, etc.) to occur, in the model tree, way before the actual assembly feature is located. This causes changes to feature id's, etc. that impact the assembly features higher in the model tree. For example, if you create a Creo Solid Weld in an assembly, then create a machining cut after the weld, which might reflect the real life order of operations, that cuts through an edge or surface that the weld references, your weld will either fail or have a portion of the weld disappear. The work around is to create a copy of the surface or edge at the piece part level that the weld can reference. This copy exists before the assembly level feature is added to the piece part, so it is not impacted.

 

I do not know enough of the programming behind the geometry manipulation to have a good suggestion on a solution. My thought is that assembly features need to move away from being added at the piece part level, and somehow need to be able to manipulate the geometry at the assembly level itself. Something like "negative material" that is able to remove material that might exist in the same location, but exists in the assembly rather than at the part level.

4 replies

Feb 24, 2021 9:38 PM UTC

Please further explain issue.

As far as I know regular cuts, holes, sweep cuts, revolve cuts at the assembly level add no new features to the component level or change size at the component level.

If you are using the weld application with weld prep while creating welds, this will add the features to the lower level components. As far as I know framework does the same thing by adding features to the lower level components.  These are intended to be use at the concept stage to add the features in the beginning of the parts design life cycle.

If you don't want the feature at the part level example: rough stock (with weld prep the parts will have the cuts before welding) you might want to look at making the part "flexible" on the fly at the assembly level when it's placed, resuming the feature at the assembly level and changing its size at the assembly level and have the feature suppressed at the part level to maintain a blank stock state.
Hope this Helps,

Don A
Pro/E user since rev 10

Mar 5, 2021 8:18 PM UTC

The picture blow shows the additional features that show up after assembly level cuts are made. I am struggling to reproduce some of the feature failures that were caused by the assembly cuts later in the model. I was able to get a circular reference to show up because of this issue. 

 

test129847_0-1614974191959.png

 

Community Manager
Feb 21, 2025 11:31 AM UTC
Status changed to: Acknowledged

Hello,

Thank you for your idea. Based on the details you provided, we are acknowledging it as the Community management team. This is not a commitment from the Product team.

olivierlp
Community Manager
Apr 1, 2025 4:00 PM UTC
Status changed to: Archived

Hello,

We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.

You can always post a new idea with all the details required in the form.

Thank you for your participation.

Olivier