Recently active
Today, we are able to insert colors to parts, using intent selection, paint individual faces, complete part, quilts... But if the number of surfaces in the model changes, the color applied to the new surfaces, is the color of the part. It should be possible to maintain the parametrization of selection intent to maintain the color of the selected intend faces, features, quilts... Today many CAM softwares needs the information of colors in parts, to automate the milling process.
Every day I need to flat complex sheet metal parts, and always need 3rd party software to make this. I saw that Autodesk inventor is doing well in this. Creo should have a similar thing. See inventor's video: https://www.youtube.com/watch?v=fhleh8ZRU7M Another possibility is to having inbuilt software like Fastform.
I mean what you can see in the attached pic.
Allow custom naming convention for auto-generated sheet metal flat instances. Currently, the behavior is to suggest the naming convention <filename>_flat1. The prompt does allow you to change the name before creation, which at least lets the user correct it, but it would reduce user error if the auto-naming suggestion conformed to our business logic. Current Version: Creo 4 M060
Need a way to toggle the attachment of the leader elbow to the different lines of the stacked dimension text. This is possible on an annotation feature note like the one shown in the attachment by right clicking on the small red dot and selecting the right two options on the pop up menu.
At the moment, there is no way to arrange the parameters that appear when you click on new -> part or assembly. We need the users to fill in a variety of parameters against the part, that are synchronised with Windchill and the current order (alphabetical), makes no sense to the users. Please make a mechanism whereby the parameter order can be set, ideally make it follow the order in which the parameters are set in the tools -> parameters window.
We have a section of our business that now run Creo as a standalone, using legacy data that was originally created in Intralink/Windchill. These legacy models when opened will display their REV and RELEASE LEVEL at the top of the screen. I've concluded they are driven by the parameters PDMDB, PDMREV and PDMRL. When creating new parts outside of Windchill, these parameters are obviously not automatically created. If you try to create them, Creo will deny and tell you that they are reserved. To get round this I added config option 'allow_create_pdm_param=yes'. Now I can create the PDMRL and PDMREV parameters manually and add some values - Creo then populates those values at the top of the screen Inquiries with support suggest this is hard-coded to PDMRL/REV. It would be good if we could change this and select which parameter(s) appear.
I have played with Inventor for some project, and I really appreciate the possibility to set a component visible for the Bom directly in the model tree. If the component /assembly is set as Default Normal(1) - the Bom will normally recognize it If the component /assembly is set as Reference (2) - it will be excluded automatically from the Bom Derivation, Mass Calculus and In the Drawing Environment is shown with a dotted line style. In the attached file an example: the red component comes from another Purchasing Assembly and needs to be used just as "Reference" for other components, It should not be part of the bom of the Asm006.asm, etc.etc. Actually we have to fight with ( Skeleton, Publish/Copy Geom, Exclude in report bom in drawing, etc.etc. I suppose this would be a much easier way. thanks D.
I am sure that the topic concerning partial circle representation in drawing has been discussed here several times. Unfortunately, I have not found in this regard here in the forum. Is it possible or not interesting that is the circle in the model is shown why not in drawing? See Attachement
It is possible to duplicate an annotation (select > right click > duplicate). This can be useful when you need a similar annotation with similar references as one that already exists. Generally when duplicating an annotation you will want the new annotation to be visible in the active combined view. However it does not currently work that way, after duplicating you then have to select the new annotation and click "Add to State" so it will be visible. It would be nice if the new annotation is automatically added to the active combined view.
Currently in Creo 4.0 M100 you can not remove the locked PTC parameter which were created during an import with ATB on. Per CS48983 you must delete the import and reimport. This is a waste of time, there may already be references to the geometry. If you make the ATB "Make Independent" then there should be no need for the locked PTC parameters. Please remove the restriction of removing unwanted parameters.
We would like to add the GTOL Indicator directly do the dimension – without a GTOL itself (the same as on the screenshot from the DIN/ISO norm I have attached to the Case).
This is needed.
In the old style menu of classic NC steps it´s possible to add cl-command’s without accepting the text. Therefore, a click on the "OK" button is enough. In all NC features implemented in the "new" GUI there is an additional click on "accept" necessary. Many users forget to click on this accept button and it´s an additional click for every CL command. So please implement the same functionality in the new GUI as in the old one (safe CL command without clicking on accept). classic NC featurenew style GUI with additional click necassary
Please add the "compute CL" command to the list of configurations options, which was implemented with the config.pro option "mfg_misc_user_options" which is available since Creo 3 M170 for regenerationfor CL-Data output
Please consider the following workflow: You design a part You run an simulation on it You run a topology optimization on it ( based on the constrains defined in simulation env ) You get the resulting part ( optimized ) Now you would like to run the same simulations you run on the original model ( to verify performance ). In order to do so you need to define the constrains from the beginning ( which may lead to mistakes ). Should you had the ability to "carryover" the constrain from the original model ( as the constrain area haven't changed ) to the resulting ( optimized ) model – It would save considerable amount of time and reduce risk of mistakes. this shouldn't be hard to implement as the constrained geometry remains "as is" and doesn't changed due to geometry Reconstruction.
Hello, Wouldn't it be the right time to update ( or sustain ) our beloved Spin Center with something more modern and useful? I think the title is self explicative. But I add a picture to let you understand how other 3d software helps the user in the view management ( spin, zoom, set view/rotate/pan/constrain view movement, etc. ).
In Creo 4 PTC changed the functionality with the new Notification Center. Prior to Creo 4 if a model was imported and it was not solidified then it was not immediately apparent to the user. Now with Creo 4 it defaults to failure to solidify as being an "error". Being an error means that those references can not be used for next higher assembly references and that error propagates to all next higher assemblies. This becomes a big problem when opening large vendor import assemblies. PTC's solution for this is the config.val file which can be placed in the start-in/working directory. If a larger organization wants to change the failure to solidify to be "ignore" then the file needs to be copied to every users start up location potentially over riding the users local config.val file depending on how it is implemented. This idea is to create a config option that allows a file path for the config.val file similar to the way that the mdl_t
When setting an assembly on Shading with edges, some edges in background of the surface are displayed/hidden based on Zoom Level. This behavior especially affects Sheetmetal models and is described in Article - CS295580
Intf3d_out_configure_export yes checks the "configure export" box by default for stl files. The same settings are applicable to 3mf and amf files but Intf3d_out_configure_export yes doesn't cover those. This idea is to extend Intf3d_out_configure_export yes to apply to 3mf and amf file formats.
Currently Inventor parts can be opened in Creo Parametric and all the standard properties are converted in parameters (and saved in the .creo file). Inventor doesn't use the same naming as Creo , this leads to some missing parameters. When creating a drawing with an assembly consisting out of Creo and inventor parts, and creating a BOM , you'll notice that some of the parts don't show up in the BOM-table. This occurs due to the parameters missing that creo uses to create the BOM. all imported inventor properties
Flexible hoses for pneumatics are often bundled using for instance tywraps. It would be very convenient to be able to bring multiple routes for flexible pipes to one route, similar as is possible in routing wires with Cabling.
When using the “Overlapping geometry” inspection tool in sketch, it would be very useful to have an automatic zoom that center the screen on the highlighted entities.
When the config option "regenerate_read_only_objects" is set to "no" flexible models are not modified on open. We saw significant improvement in performance when we had the option set to "no", but since we have flexible models, we need to set it to "yes" instead. I would like to see an option added, maybe called "changed" or some other value, that would ONLY regenerate models that have a variation applied to them within the context (assembly level features, flexible model, …). If a model has no changes at that level, I would want the model to not be regenerated.
At the moment the ECAD assembly does not support Simplified Representation for the management of the flat state of the PCB (components do not follow the board part keeping their position). It would be very helpful to add to the Flat Pattern tool of the ECAD assembly the same improvement of the sheetmetal part, in which is now possible to create Flat Pattern state via Simplified Representation. Flat Pattern of ECAD assembly supports only the Family Table Flat Pattern of Sheetmetal part supports also the Simplified Representation
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.