Recently active
When replacing a non flexible component by a new flexible component, the flexibility of the new component is automatically deactivated. It would be fine if Creo ask during the replace process to use or not the flexibility for the new component as already implemented during the standard assembling process. Today, after a replace, the user must afterward reactivate the flexibility using the feature "Make Flexible" to reactivate the flexibility of the new component. Other problem, with the actual replace process, the user is even not informed that the new component contains flexibility and that there is maybe some values to change.
One of the improvements that should be made in sketch, is the symmetric constraint. Now it's only possible to create symmetrie by having an axis system, and applying the constraint only to vertices. it should be possible to do it to lines, arcs and circles.
While using fillet and chanfer option, in skecth environment, it should be possible to have the selected corners, with the same dimension. Now it's one of each dimension, after we need to constraint the dimensions to have the same value.
With regard to article CS282769 is suggest the following product idea: Add possibilities to created thread turning features on kinked profiles. This is possible with SiemensCycle98, but not in Creo NC. The turn profile in the example is colored in red
If a user creates a datum target area as a circle or square in a drawing, it does not adjust the size of the circle/rectangle area to match the scale of the drawing or view. Support says that this is the current functionality as these are symbols, which can't adjust the size based on scale. To me, this seems like an obvious oversight that should be addressed.
Article CS108304 address how to change the "origin" of the table so that as rows/columns are added or column widths are changed, the table will grow in the proper direction without having to re-arrange the table. Currently changing the "direction" in the Table Properties dialog box reconfigures (re-arranges) the table. The name of the command, "Set Rotation Origin" is not very intuitive. Suggestions: 1. Consider renaming command to something like "Set Rotation & Growth Origin" 2. If the rotation origin is set to the upper-right corner of the table, then when the table properties dialog box is brought up, then the "Direction" should be "Leftward and Descending". Currently, it work like this: a. Default growth direction of a table is rightward & descending, so the origin is the upper left corner. b. Origin is set to upper right corner. c. Columns added and/or Column widths adjusted to confirm growth is as intended (leftward) d. Table properties dialog b
The title says all, I think.The question's point is that not always you are interested in the regeneration of the constraints.For example you may want to maintain a certain position of the mechanism/assembly while you change a dimension of a single component and you want to regenerate only that without losing the entire position.ThanksBye
When adding a new symbol into a drawing checks for existing symbols and paths seem to be done. If the path or file name is not valid, Creo can exit. There should be a warning or error about the inconsistent data, but no exit. Related to SPR 9526144.
Please provide either an overall assembly/model or, better yet, a feature based regeneration/rebuild estimation. This would allow users to have better time management (e.g. this assembly will take approximately 10 minutes to regenerate, I should work on something else). It would also allow users to more accurately pinpoint problem geometry and features which are roadblocks to quicker regeneration.My current build is Creo 4.0 M060.
By introducing Unite technology, it is possible to handle and use foreign CAD data like native Catia V5, NX or Solidworks files as well as exchange formats like STEP and JT in creo parametric. To keep track and maintain foreign data, it is mandatory that the original files are stored in Windchill. So, it is possible to enrich creo copies with additional features/datums and - thanks to ATB - to update these, when the originals get updated by new versions. Unlike all the other formats, JT files can only by opened or imported into creo from local disk but not from Commonspace or Workspace. So, unfortunately there is no use of JT files stored in Windchill. So, please enable import of JT-Files from Workspace. Additionally it would be great, if creo would create "Source & Image - Links" when exchange formats were imported in creo files, in order to support the "ATB/Update" use case for them as well.
The idea is to create an edit external sktech button above the "unlink" button. This way, when you forget that geometry is driven by external sketches rather than internal sketches, you can jump into editing the sketch directly from the feature editing dialog rather then having to find it in the tree yourself.
Non regenerated elements, should appear in diferent color or texture. With this, user will easily identify, what geometrie, will need to be regenereted.
When we replace assemblies, it should be possible to replace sub assemblies by copy, with the replace command. After this option, it should appear the traditional assembly save a copy interface.
It would be nice if there was a way to undeclare parts/assemblies from specific Layouts/Notebooks within Windchill or from within the layout, and say "Remove All Declarations from Layout/Notebook". Right now, doing this on a part by part basis takes up way too much time, seems like a great opportunity for improvement.
Custom icons in CREO (the ones defined by user), should have higher definition image. Actually the icon's image, don't have many detail, and sometimes is hard to see the diferance between the custom icons.
The functionality "make default" for combined states was only specified for the Creo View adapter usage but not for the view manager (see article: CS187463 ). A part or assembly file in Creo Parametric always opens in "default all" combined state. That means, that this will be the combined state that is active, when a worker is processing the file. Currently there is no chance to define a combined state that will be directly active when the file will be opened. If you have defined different combined states that uses different appearance states, it is not possible to export all of them to STEP for example because the STEP interface currently can only handle one color set. Therefore the active appearance state will be exported. For MBD/MBE purposes it would be very helpful to be able to define a combined state as the "user"-default which will be active when opening the file. In that case it would be possible to automatically generate the correct appearance when a Windchill wo
The system colors, for example system_geometry_color, can be set via specifications in a file. For example, I use "syscol.scl". To the best of my knowledge, there is no documentation of what parameter names are available for these settings. Equally important, it is not clear what effect setting any of these parameters will have. Therefore, I am requesting that there be thorough documentation provided, in the Help files, of the following: (1) Parameter names (2) Screen elements affected by a given parameter (3) Syntax for the settings file, i.e. what alias_sec_dim_strong_color_to means, the color value ranges, etc.
Add a search box to the View Manager Explode tab. If you explode dozens of components, it might be hard to search one that you would want to remove.
We use Creo and SolidWorks (both latest versions) alongside other systems. A huge frustration for us is when marking up files for data release or visualisation for design reviews. Many times we need to decorate a part to show colour/finish/surface finish etc and our workflow in SolidWorks is quite simple. 1. Create a new configuration (to isoltae the markup) and split the relevant faces with the split line tool - split lines are generally taken from projected sketches or surface intersections (so we can also import specific decorations onto parts for toys etc) 3. Apply topology level colours to the split entities (SolidWorks allows you to "paint" a part by topological levels - assembly part level, part level, imported body, body, face etc). 4. Export to Keyshot and render. 5. Export to parasolid or STEP and the split faces and face colours come through. Creo has no equivalent functionality like this (in the base packages). So we are often left with the daft sc
Hello,I'm a Chinese engineer. Since Creo3.0,Model's filename can be Chinese.But when I export an assembly as STEP,it's filename and all the components' filename become to numbers,like 100_1_1.prt. So can Creo remain the Chinese filename? Thank you very much! 从Creo3.0开始,模型的文件名支持中文。但是当我把一个装配导出为STEP时,他的文件名和所有子件的文件名都变成数字,比如100_1_1.prt。所以在导出为STEP时,Creo能否保留中文的文件名?谢谢!
Cosmetic Threads in drawings are always plotted in hidden line (except for cross sections).According to standard DIN ISO 6410-1 they should be displayed as a narrow solid line even in views with display style "nohidden" for external threadsPlease provide also this option in drawings.
When drawing: Create manual dimensions without Ctrl + key, as it was possible in Pro-E WF4.0, should be possible again by a config.pro setting. Beim Zeichnungserstellen: Manuelle Maße ohne strg+ Taste erstellen, wie es in Pro-E WF4.0 möglich war, sollte durch eine config.pro Einstellung wieder möglich sein.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.1Windchill 12.xxx2. What is the problem?the worker is not able to provide indivuals file of multipage CAD drawings. We need to transfer multiple dxf files to Windchill and the ERP-system which are a part of the vailadtion prozess - a zip file cannot be verified. 3. Are you using a workaround? If yes, please describe it.using a solution from a competetor who provide the needed functionality4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.see point 2.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)company globaly - > 1500 users
We're using Tapes as Spot Tapes with different charater, controlled by Tape Spools.For instance SPOT_ Tape_white or Marker Tape etc..But PTC Creo does not give us the ability to use that method, because TOOLKIT API do not support this.If we want export the Tapes there is no chance to match the reflected Tape Spools.Means we have only the Name of the Cosmetic Tapes to identify, but not which KIND of Tape is it. So for us useless !Please implent to the Creo4 Parametric Cabling Toolkit API the function to get also further Tape Feature Parameter.- GET() User defined Parameter- GET()TAPE_SPOOL ParameterExample
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Cummins-- power generation, engines, transfer switches, engineers, technicians. Manual imagery.2. What product and version are you currently running?Creo Illustraet 93. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Current cutting planes: 4. What is the use case for your organization?Desired cutting planes (examples made using solidworks composer)—angle and thickness of the hatching lines are adjustable: 5. What business value would your suggestion represent for your organization?The cutting plane having hatch lines would make the image much more clear when a cutting plane is used. This could improve clarity and reduce the errors done when using the manuals.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.