Recently active
I know there are other ideas open about Creo in general including non-geometry elements for size information. I would like to particularly address the ModelCheck OVERALL_SIZE values, which we use to generate a parameter which goes to WindChill. If we can get that limited to just the geometry and not sketches, surfaces, etc that would be great!
Please add the follow options to ModelCheck PARAMCHECK: Ability to specify whether a specific parameter gives a warning or error. A company may have some required and some parameters may be optional. Currently PARAMCHECK gives all warnings or all errors for all parameters. Ability to require ALL CAPS.
When assigning a material, the description is displayed as highlighted below. Material has description When choosing a library there is no description present to describe the library. Library (Generic) has no description When selecting an instance, there is no description of the instance shown. Instance has no description My suggestion is when choosing a library and an instance, the Description parameter be displayed to indicate what the name of the respective library and instance is highlighted. Something similar to the Material placement dialog would be very helpful. Thanks, Phil
What if we were able to convert imported STL data and surfaces, whether imported or created, a single patch or a merged quilt, into a Freestyle sub-D mesh directly in Creo? Here's a scenario where I would benefit from this functionality: =================================================================================== I'm working with an Automotive Clay Sculptor to convert a highly-stylized piece of bodywork into digital data that can be quickly modified and iterated. I scan the clay, convert to STL, them import into Creo. I convert the STL into a Freestyle sub-D mesh feature. I then work with the Stylist to iterate and refine the form. This happens very quickly due to the pushing and pulling of the mesh. =================================================================================== Right now, I have to do this in a secondary software called Zbrush then import back into Creo as an .OBJ. This ability to import .OBJ files into Freestyle is a hug benefit. It's i
Currently there is no Placement option for "Normal to Entity" when placing symbols in 3D. For example, this would be handy when placing surface finishes directly onto dimension witness lines or the applicable surfaces in 3D.
I think a lot of people, myself included need a BOM table which will display user defined balloon numbers. I don't want the index numbers in the balloons. Ideally, I need a table that I can have the BOM plus a column in which I can define the balloon number required. This would save a lot of time from having to manually create balloon notes with my desired number. Many of us have ancient MRP systems that we must bend to.
When explaining ideas to customers it would be very helpful if a cross-section view in a drawing could be displayed as "shaded with edges", at the moment this is not possible.
When an assembly model is saved, if the children are opened and edited in the session. If there is a dialogue box asking for what all the components to be saved in the session appears it would help in reducing errors due to forgetting to save few components while working with large assemblies.
Need line numbering, easy symbol insertion.
Currently, when a feature is part of a pattern it can no longer be copied and pasted (see the following fig.). It would be nice if the Copy - Paste/Paste Special operation was also present for the features belonging to a pattern. Copy Command is available Copy Command is no more available The same happens in assembly mode if you try to Copy - Paste/Paste Special one component belonging to a pattern (see the following fig.) Copy Command is available Copy Command is no more available
If inserting two identically parts with different orientation in an assembly it is not possible to modify the displayed part-level-annotation without changing the part. This behaviour differs from the proceeding in drawings. In drawings it is possible to modify size, position or text style of annotations without changing the part. The picture below shows an assembly with 2 parts, the second one is inserted rotated. 12345 is an part-level-annotation. It is not possible to change the orientation of the two displayed annotations independly.
I would like to copy the content of a cell of a drawing table and past it in another cell that is not empty. Currently (Creo 6) I have to delete the content of the second cell before pasting because this operation works only on empty cells.
We need to create ordinate dimension with +ve and -ve sign in creo detailing for the mold base plate . If we able to provide with sign, it will be more easy to cross check with drawing and nc programing coordinates. I have attached the sample picture for the negativesig.
Allow to create or modify materials in Creo Flow Analysis with a modern and friendly user interface.
Random vibration simulation is performed in Creo Simulate and its output response of acceleration vs frequency is unable to extract. This feature is useful in order to measure the output vibration levels when we are comparing the simulation with the test result. Also this will help in identifying the acceleration levels with respect to frequency at a particular location.
It is usual to show the CAD program and its version on the drawing title block - for example in a field named "CAD System and version". It would be useful to have a Parameter (e.g. named as "PTC") which value is the actually used CAD (e.g. "Creo 2"). This parameter could be taken into the drawing template and is refreshed automatically (also when a new index is created which is drawn with a newer Creo version)
Now, Merge/Inheritance feature for Part mode can only be replace by family instance only. It will be good if it can be Replace by any other standalone model. (similar to part Replace by Unrelated Component in Assembly mode). Else I will need to re-create an overall similiar part if only the Merge/Inheritance feature varies.
Propagate Creo's Make Flexible variad Items (Parameter's value) to Windchill PLM. In Windchill, components parameter's value within an assembly should reflect as a component's value instead of the part's original value. Please refer to the slides for furtherexplanation.
In the drw if you "show" a feature's dimension and make it "ordinate", this behaviour is reflected also in the 3D model related; so if you are in 3D and goes to edit the same dimension, it will appear as ordinate as in the drw.What I ask for is the scission of this behaviour between the two environments.Bye
Or give us a decent workgroup level file management systems like we had with Intralink. Windchill is dreadful.
While working in Creo4 drawings, add right click commands when a dimension or text is selected. These commands should be the most used and popular ones in the drawing ribbon. Same concept when .prt and .asm are selected, alot of options when right click used.
Drawing templates can only be used during the creation of a new drawing. It would be very useful to be able to apply a template to a sheet within an existing drawing. For multi-sheet drawings this would save a lot of work. On an existing blank sheet, the applied drawing template would use the currently active drawing model and place the views on the sheet. This would eliminate having to create a new drawing, and then importing it into an existing drawing. Same as https://community.ptc.com/t5/Creo-Parametric-Ideas/Drawing-template-to-place-views-for-the-parts-models-in/idc-p/627750#M12713
Drawings with multiple sheets need a Table of Contents (TOC) - just like any other multi-page document. Report repeat region parameters would need to be established for just this purpose. A Table of Contents should be just as easy to implement as a Bill of Materials. A parametric Table of Contents would update any time a sheet is added, or is re-named or moved in sequence.
Drawing view scales are not parametric (and do not respond conveniently) to changes in model geometry. Use of the "drawing_scale_factor" parameter requires additional 'relations' in part and assembly models, when it should be handled entirely by the drawing. A 'drawing template view window', that always fits the geometry of the view model (part or assembly), regardless of its orientation, would be a practical tool. Additionally, an option to specifiy a scale denominator by which the scale is adjusted and still fits inside the view window.
As You type part number in Windchill search box , parts are interactively show on side of right side of screen as thumbnails to see either drawings or part in window This allow to easier chose of the part the way they look not just a number * mark is a pain witch makes search
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.