Recently active
Greetings:I'm really struggling to understand Creo's drawing module and one of the issues is hole callout. I was told that the drawing mod. does have that ability and you have to use 'Show Model Annotation" weird but okay. So I found out a how have hole call out show but the callout is not what I was expecting. Need some help on this been at it for 1/2 cay and still can figure it out.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Is assembly with fix option a solid hold ? meaning it will not move . What does fix relate with in asm. Like what is it constrained to ? I hope its not free floating in space and moves uncontrol. ANDWhat is the difference between fix/default/csys ? THANKS IN ADV
Hello, I want to customize the serial numbers shown in a repeat region table in Creo drawings. Instead of using the default linear numbering (1, 2, 3, ...), I’d like to apply a more structured format like; 1_11_2234_14_24_3567This is especially useful when I need to group sub-items under a main item, or indicate logical associations between parts in an assembly.I've tried using rpt.index and creating relations in the repeat region, but I’m not sure how to dynamically generate such custom values. What’s the best way to set this up in Creo so that the table updates automatically based on the model?
Dear PTC Support Team,I am reaching out for assistance with an issue I’m experiencing while trying to activate a license using your License Indicator. I received an order number from my university and have been trying to generate a valid license based on that.While I am able to request the license and it does appear in my files, the status is always shown as “Not Eligible.” I have already attempted several steps to resolve the issue, including:Deleting and reinstalling the license filesCreating a new PTC account with a different email addressReinstalling the software entirelyUnfortunately, none of these steps have resolved the issue, and the license remains unusable.I would appreciate your support in resolving this. If you require any additional information, such as the order number or screenshots, I will be happy to provide them.Thank you in advance for your help.Best regards,Leandro KnoopTechnical University Braunschweig
Good day.Has anyone encountered this error message in the log of messages?No relations have been defined for this model.I am seeing this in a few of our programs but cannot seem to find any "wrong" relations within the various parts or sequences.This creates an extremely long set of log messages which cannot seem to be resolved.I have found this article from Creo3 (2015) but with zero answer to this specific message inside, despite mentioning it... Currently on Creo 9.https://www.ptc.com/en/support/article/CS196584If there are no relations and it provides this error, is Creo indicating a requirement for relations in the sequences?Any help would be much appreciated.
Hello, recently I am using CREO parametric 11 for a project, and I have found useful STEP files online that I need. However, when importing they seem to lose many features and even the ability to edit them in basic ways. Is there a way to import STEP files so that they can be edited?
1. Describe the ProblemNo way to make a chamfer based off a sketched curve like you can a round.2. Are you using a workaround?Using swept blends3. What is the use case for your organization?I need a chamfer that has lead ins and outs4. What impact does this problem currently have on your organization?Added time and features to create the same geometry.
1. Describe the ProblemGood morning,It would be nice if the dialog box inside a command could be enlarged according to needs.For example, the "Shell" command requires many selections and the current space in which the face selections appear is really limiting and uncomfortable.You could give the possibility to resize it at will and not fixed as it is now.2. Are you using a workaround?No.3. What is the use case for your organization?Usability.4. What impact does this problem currently have on your organization?uncomfortable
Would anyone care to comment on the Mold Machining Extension (MMX)? What does it offer over and above what is in the NC complete set module for 3 axis milling?
Hello Creo experts,I have a question regarding volume milling. I have often chosen to use rough or HSM sequences instead of volume milling for roughing operations. However, I've noticed that the cycle time for HSM and rough sequences is not as good as I expected. Despite being named high-speed milling, the cycle time is actually longer than the volume milling cycle for the same pocket size. Can you please advise on the parameters I may be missing to achieve a shorter cycle time compared to volume milling on the same size pocket?Regards,Asif Fisa
I use Creo elements/directs drafting Mixed UI 20.7 on Lenovo LOQ gaming 2024 having RTX 2025 Nvidia When I draw any Geometry (Line, Circle, Point, Rectangle,...), I can not see it on displayI had tried to solve by checking Geometry setting, Viewport -> setting, Setup -> show -> Layer. But all fault. I see that I open Setup -> show -> Layer, change color to White and save. But, when I open again. It is still default with Black. whether is that the cause? What is the way to get ? Or. Who are know the tips to fix it? Thanks
We use a method of joining to sheet metal using a process called tog-l-loc also known as clinching which cold-forms the part metal using a special punch and die to form a strong interlocking clinch joint. The result of the process is a round, button shaped extrusion on the die side of the assembly, and a small cylindrical cavity on the punch side. The clinch joint requires only the sheet metals that were joined. No external fasteners, or welding is utilized in the process.I'm trying to re-create the joint using punch or die, does Creo have the ability to punch(form) two sheet metal plates simultaneously in assembly? The thickness of both sheet metal thins out after the operation. See attached image. Let know your thoughts or ideas.
Hi,I am using creo 9 and on one of my drawings I have a section view that isn't showing up. The section shows fine in the model, but on the drawing, hatching appears on the view, but it is not cut. I have tried flipping it and using a local section instead of a full section and switching from a projection to a standalone view. If anyone has any suggestions, I would greatly appreciate it. the
Hello, dear community members!I want to design a mold cavity, but I am stuck on "Volume Split." I can't run this command, and after doing some research, I noticed that the problem is related to the "Parting Surface." I received the following error: The parting surface has 3 contour(s), make sure that each is necessary. Could you please help me solve it? Please check the attachments as well.
1. Describe the ProblemWhen assemble a component, if the value of "comp_assemble_start" is set to "strain_in_window" , a separate window appears immediately, but when an existing component is reassembled by edit definition , a separate window does not appear. I want a separate window appears immediately when I reassemble already assembled component with edit definition.2. Are you using a workaround?We have to manually turn on the separate window every time I reassemble.3. What is the use case for your organization?I want a separate window appears immediately when I reassemble already assembled component with edit definition, if the value of "comp_assemble_start" is set to "strain_in_window". There is no need to manually turn on a separate window, making assembling easier4. What impact does this problem currently have on your organization?We have to manually turn on the separate window every time I reassemble.
1. Describe the ProblemFrom an opened Assembly, we would like a new option that would Export an individual STL file for Each Part in an Assembly using the Assembly Coordinate System. For example, if the assembly is a plate and 4 bolts, the output would be 5 STL files. If each of these 5 STL files was imported into a part and then these 5 new parts assembled using the default coordinate systems, you would have the original assembly (but tessellated of course). The application for this enhancement is a downstream use outside of Creo. The name of this option might be something like Export every part per location in Assembly.2. Are you using a workaround?Within the Assembly, activate each location of a Part, create a new coordinate system in the part at the location of the Assembly coordinate system, open each Part, export STL selecting the new coordinate system(s). For example, if the assembly is a plate and 4 bolts, the bolt would have 4 new coordinate systems tha
1. Describe the Problem Right now the default round size generates a size based on the boundary box of the part. That's fine. The number it produces is not typically a manufacturing friendly size though. For metric sizes I would recommend that the default number be rounded to 1mm increments. For English units I would recommend that the default number be rounded to common fractional sizes. 2. Are you using a workaround?Yes, I update the default round size number every time I make a round.3. What is the use case for your organization?Would save training; save manufacturing costs so that a machine shop wasn't trying to mill in a .205 radius round.4. What impact does this problem currently have on your organization?This is more problematic for new people who don't have a manufacturing background to know to use standard sizes.
I need to create a note with a symbol similar to a drop, in the notes menu there are only square, triangle, ellipse... I would like to know if there is a way to customize these shapes?
Hello,I wanted to ask regarding the PCX extension. Is there an advanced version? or is the T1 package the only one available in creo? Also, is there a product list that I can look at to know the coverage of the extension? Thank you.
Hello, I am the Creo Librarian for my team and we had an issue recently that caused some folks Creo Schematics files to error during the syncing process. They get the error "This file contains an item name that already exists in the design." This had to do with a datatable issue and we have been able to correct most peoples files by going into that datatable and deleting the duplicate parts. However, on some of the designs, the datatable in question is not appearing in the datatable explorer and I am not sure how to recover that datatable as the program is saying that it already exists within the design. Is there a way to recover said datatable or am I looking in the wrong location to get it back into the datatable explorer. Thanks, Justin
I have an assembly cut that has stopped working no matter how much I fidget with it. I've tried redefining the planes in sketch set-up, reference planes, adjusting the dimensions, restarting Creo, .... If I add a new cut, the cut works fine. There are 50 instances in the family table, so if I can help it, I would like to not redo the cut. Using 10.0.7.0 for a long time.
it cause slower performance when i do loop with ProFeatureWithoptionsRedefine function, is it possible to turn Off Auto Regenerate after ProFeatureWithoptionsRedefine or ProFeatureWithop function?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Maritime Industry. My role is digital capabilities and my stake holders are engineers' that will be working with Creo View in their day to day. 2. What product and version are you currently running?Creo View 8.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I want to filter Model parts by attributes. For instance in the screen shots, I have two different values under the attribute "MATERIAL_MATERIAL" and I would like to see only the parts with the Value "AH36". Is there a way this can be done via filters? 4. What is the use case for your organization?This would help our engineers' filter to necessary parts, create part groups and navigate models in their day to day.5. What business value would your suggestion represent for your organization?This has great business value for
A tool to create and manage a custom font. I am thinking of the possibility of creating a sketch for each character of the font, so that it can be used to shape writings or logos, that update in real time by changing the font.
How to change the display size to a larger size to reduce the blank background. to use as much background space as possible.creo system conversion to jpeg and new uses of space Thanks
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.