Recently active
Hi! First time poster here. I'm sorry if I'm in the wrong place. Long story somewhat short: I use creo parametrics 8. After adding new fonts to my c/windows/fonts folder, I opened creo to find it looking like this (see attached photo) I have tried changing UI font size to small, doing a different font.. None of it has made a difference. There are no changes to any other software on my computer. Any helpful ideas for a fix? Thank you!
Hi, I'm using Creo 8.0.10.0. I am trying to create a mapkey that will create/set a yes/no feature parameter ("Feat Param") from the model tree in an assembly. However, I need to be able to tell Creo which feature (part or subassembly) in the model tree is to have the parameter applied to, but when I click on the parameter field in the model tree, the parameter window opens and the mapkey window then becomes inactive and I cannot pause/resume or do anything until the parameter window is closed. Is there any other way to set these parameters that would maybe allow the mapkey to be recorded? Thanks,Matt
I upgraded the Creo Parametric Educational software from version 9.0.1.0 to 11.0.4.0 on our Citrix servers. The students access the application from the cloud. I noticed on the Creo dashboard under the Common Folders the server is directly accessible. Is there a way to lock this down in the application, so the students only have access to the required drive on the server to save their work? Any guidance you can provide is greatly appreciated. Thank you.
We have two Creo Citrix Windows 2019 servers that have been flagged for a software vulnerability. This is the PTC Creo Parametric version 9.10.1.0. It states that the following software has been installed in this path: C:\Program Files\PTC\Creo 9.0.1.0\Common Files\x86e_win64\gpost\ncjlibs\ is version 11.0.11.9.1 but the fixed version is 11.0.14.10.1. When I went to the AWS website the it shows that available version is actually 11.0.25. Should I use this version? Does this have any impact on how the Creo software functions? Please let me know if you need any additional information. Thank you.
I have a model from a previously released Assembly that has a mystery shaded plane "thing"...it is not a plane, not selectable, not in the model tree, not in any layer including solids, is shown in everything: the drawing, assembly, the generic prt and both family table prts: which indicates the item is not formed on the asm or only on a family table prt (must be on the generic). I need it hidden. Also - how on earth is this possible? I have tried hiding everything in the layer and model trees...everything including the solids...it always stays. It is NOT shown if I switch to a non-shaded view on the drawing only (remains no matter the view in the open model). Creo 9.0.3.0.
Hi, see attached gif I want to copy text from outside of creo (notepad or another text editor). I cant seem to copy text as "enclosed text". I try to copy "@[Enclosed text @] some other text" into a drawing note and it doesn't work. after I click properties, I need to delete the extra @ creo added. see attached gif am I doing something wrong?
Hello, I am hoping that there might be a way to adjust a single character in a &REF note in my drawing. The issue is that my font does not discern between 1 and I and I hope to potentially adjust a single character of the note. I'm sure y'all are aware that attempting to edit the text it converts to something akin to "&REF_DES:" making a change to a single character impossible.If there is a not a way to adjust a single character in the reference note, there will be no issue for me to replicate the reference leader note anyways.Thank you
Hello all,Currently using Creo 11 (recent update to).Tried moving radial (& diameter) dimension in Drawing by just grabbing the text but it only changed the length of the leader. When I grab the leader it "rotates" along the arc.I use to be able to grab the text & do both.Is there some setting for Drawing or Config.Pro that needs to change so I can just grab the text & relocate the text where I want rather than the two-step process of change angle of leader then change leader length?Thanks!
Anyone have any tips for finding the single sided edges of a merged surface which are preventing a Solidify? I have the upper and lower surfaces of a water jacket which ideally are supposed to merge and solidify so I can use it as a cut from the stock cylinder head. The surfaces merge but Solidify isn't available when you select the merged surface. It looks like there are multiple tiny single-sided edges but I can't find a way of identifying them all.
We are running Creo 9.0.5.0. I created drawing formats and templates in 9.0.9.0 and copied them to our other system. In the titleblock I have a surface finish symbol from the text library included with Creo. On my computers, it shows properly like this: On one of my users, the surface finish symbol is a box. What could be causing the font to be missing on one computer but not the other. We use a network install of Creo, so everyone is pointing to the same installation of Creo on each network. This is what makes it really confusing.
Hi all, Hoping someone can assist with a solution to this problem. I have just redone my department's drawing template and formats in Creo Parametric 10.0.3.0. However, the original templates we used had our logo in the title block of the drawing format, seemingly embedded as a OLE using MS Paint (?). However, during the process of our computers being upgraded to Windows 11, the logo no longer appeared in the title blocks for drawings (in the printed and pdf exports as well). So, during the template/format updates, I added the logos back into the format as a .bmp OLE via the "MS Word" option. This seemed to work, and all users were able to see the logo - in Creo, as well as printed and pdf exported - along with the logo propagating to new sheets on creation. However, the issue was that regardless of the pdf export settings, the logo would always be a very low resolution & have extremely noticeable pixelation around the edges (not shown in Creo representation).&n
I am using Creo Simulate Release N/A and DatecodeN/AI am running a simulation on a two piece aerofoil. The applied pressures are entered via .fnf files generated using Creo Flow Analysis. The aim is to run a baseline configuration and obtain the Fx and Fz loads to give lift and drag. The next step is to vary the angle of the aerofoil flap and compare the values for Fx and Fz to baseline.Unfortunately the assembly will run in baseline configuration and with the flap angle increased by 1 degree, but fails if the flap angle is reduced by 1 degree. This happens at other angles too but I cannot see why.Here are the errors that I facedSingular mapping, solid element: 1345420The design study terminated abnormally.The element with DBID 1345420 has invalid geometry.
1. Describe the Problem User's must log in again when launching Creo View from an already signed in session of Windchill. The second login was not required with Internet Explorer. This is very frustrating for users to log in twice. 2. Are you using a workaround?There is no work around to making the user waste time log in to open Creo View from an already logged in session of Windchill. We have entered Case C17831347 with Tech Support for reference. 3. What is the use case for your organization?This applies to all organizations that launch Creo View from Windchill. In Internet Explorer version of Windchill and Creo View Interaction, User launches IE, goes to Windchill address and logs in. Finds a representation and uses open in Creo View and Creo View opens WITHOUT additional login. In Chromium Browser(Edge, Mozilla, Chrome), user launches browser, goes to Windchill address and logs in. Finds a representation and uses open in Creo View and is AGAIN presented with the same po
Anyone have a suggestion on how to manage a cable/harness in Schematics (by dataset) to a quantity of 1? We have harnesses that are 10 conductor and 12 conductor. We apply a dataset, example 10HRNS1, 10HRNS2, 12HRNS1, 12HRNS2, etc. We need to limit these to be quantity of 1 each so we do not run into errors on the BOM since they are same part number but labeled differently. So my 10HRNS1 can only be quantity 1, 10HRNS2 can only be quantity 1, 12HRNS1 can only be quantity 1 and 12HRNS2 can only be quantity 1. Thanks in advance for any suggestions.
How to change the the numerical of Tolerance in Creo elements directs Drafting (Mixed UI) 20.7I have a issue with creating the tolerance. For example. When I type the tolerance 0.027, it only show 0.03 I tried to find the Tolerance setting box and never see it. Please help me to change this format. Thank you
Hi all, So we are in the middle of changing our creo 4 to creo 11.0.2.0. I used Creo 4 for years on this machine, never had any issues with licensing (as the way it should be since it is a locked license for a certain MAC address). The machine in question is a workstation laptop, so it has multiple MAC addresses (one for LAN, one for wi-fi 2.4Ghz, one for wi-fi 5Ghz. Creo4 used the lan's MAC address). Now, as Creo 11 comes in the picture I face multiple issues:- at the installation, it sees a different MAC address , so I moved the license to that address, so it allows me to complete the installation- if I change from 2.4Ghz network to 5Ghz one, creo11 won't start ("Invalid host name")- if I change from wifi network to lan, creo11 won't start ("Invalid host name")- after installation, it only works with active internet connectivity- even if creo11 starts, "license is lost" message appears every 3 minutes or so, if I click on retry, I can continue to work, "Regained floating li
[Creo 8] So i have a flexed board and everything works great. If I deleted a component, how do i get it back? the baseline .idx is all i have. the validate tool still shows it and wont bring it back in. I've watched the east coast demo and it didn't cover that. No real training on the PTC UNIVERSITY on this.
1. Describe the ProblemThe current capabilities of Creo Parametric support only the export of filled welds to XML, which can be utilized for programming welding robots. This functionality ensures that the filled welds are accurately represented and can be effectively used in automated welding processes. However, non-filled welds are not included in the export process. As a result, these non-filled welds cannot be utilized for programming welding robots, which may limit their applicability in certain automated manufacturing scenarios. This distinction is important for users to understand, as it impacts the overall efficiency and flexibility of the welding automation process.2. Are you using a workaround?Manual effort for the weld path generation, which requires physical components.3. What is the use case for your organization?Extending the XML export capability to include a comprehensive range of weld types would significantly enhance our efficiency in robot weld path generation. Curren
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.My company is a manufacturing company, I am a "Project Engineer for PLM & design services". My stakeholders are Windchill and CAD users in the design department.2. What product and version are you currently running?Creo Elements Direct Modeling 20.4.1, Creo Elements Direct Drafting 20.3.2, Windchill PDM Link 12.1, Windchill 12.0.2 and other PTC products3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When creating a sheet metal part in Creo Elements Direct Modeling with several bends and lips there is currently no warning for overlapping contours in the „Unfold 2D“ command in Sheet Metal or the „Create Flat“ in Annotation. Unfold 2D command in Sheet Metal module, sample of simple overlapping bends:Create flat command in Annotation, sample of simple overlapping bends:Users in the design
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Elements Direct Modeling 20.6.0.0, Creo Elements Direct Drafting 20.6.0.0, and other PTC products2. What is the problem?In all modeling versions, options for standard-compliant representation according to DIN EN ISO 21920-1 are missing3. Are you using a workaround? If yes, please describe it.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.You cannot work according to the norm5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 10.0.0.02. What is the problem?Lack of functionality3. Are you using a workaround? If yes, please describe it.None decent4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We would use this function to generate a fully associative multibody part from an assembly file with the aim to generate the final machined part (1 item in our BOM) derived from a welded assembly.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It will help saving a lot of time spent by users in generating a shrinkwrap and obtain a better result.
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY TO CREATE THE ASSEMBLY FROM MULTIBODY PARTYour reply is very valuable for me
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. All industries that create, edit and use sheetmetal parts in Creo Parametric. 2. What version of Creo Parametric are you currently running?Creo Parametric 7.0.8.0 up to 9.0.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. In Sheetmetal parts if dependent copy is selected in a new mirror feature, both partially and fully dependent options stay greyed out and are not clickable. Meanwhile in Modeling parts if dependent copy is selected in a new mirror feature, you can select either partially dependent or fully dependent. Note: this bug has existed since 2014 and has never been fixed: CS166281 - Mirror feature option "Fully dependent with options to vary" is grayed out in Sheetmetal mode in Creo Parametric Once a mirror feature is created i
Add a slot in the sketcher or hole wizard. Slots take way to long to make.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?I cannot select multiple adjoining surfaces from a quilt to offset. I am required to select the surfaces, make a copy then offset from that.3. Are you using a workaround? If yes, please describe it.Copying the surfaces, then offsetting them.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I only need to offset a few parts of a quilt and am not able to do so. When designing plastic injection molded parts, we use offsets very often to provide a uniform wall thickness as the thicken command is not adequate for most parts of the complexity which we work with. So we have to use the work-around which adds another feature and another point of model failure and adds more clutter to the feature-tree.5. What impact does this problem currently have on your
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.