Recently active
At present Creo illustrate and not display creo paramteric of "make elasticized" feature set, because we will be used by creo parametric to a lot of "make elasticized" is set, it is expected creo paramteric of "make elasticized" feature set creo illustrate can be used to read and display Related Case Details: 15208538 https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=15208538
We already saw the introduction of using callouts in an inset with creo illustrate version 4 I believe. And also combined callouts are available in the figures. But when parts with similar name are used in an inset, and I would like to use a combined callout within the inset, this is not possible until now with Creo illustrare 6.1. Workaround is to make individual callouts and stack them together but this is not the quality one would expect from Creo Illustrate.
It would be beneficial to keep the freehand markup tool selected so that users can continuously make freehand markup on the representation in Creo View. Currently users have to re-select after every markup made.
It would be great to add a itemize feature for sub assemblies. Where you can number the whole assembly as one number and then number the parts that is in the assembly. Picture shown below.
I opened a case in the ptc customer support site (C13519222) because I have some dwg files that if imported in Creo Parametric have wrong size. Investigating ptc told me that wrong size are caused by hidden layers in the original dwg files. Observing Creo View or DWG True View there isn't this behavior and size are correct. Then I asked to ptc if is there an option to avoid import of hidden layers to solve my issue. They answered that it is not possible, solution for them is to clean the original files, but I can't, it isn't for me a solution. I can't ask to my suppliers to clean drawings because Creo Parametric doesn't have the option to see files like Autocad or Creo View. This is the original conversation: PTC: Behavior is caused because of the items placed outside the format in original file. Dwg file is having many views scattered outside the format in original file. These scattered items are hidden in layer and exported with that condition. Cr
The current ECAD MCAD Collaboration IDX support works best when the components are a part. However, our libraries are setup where the components are assemblies. This allows multiple benefits: Assembly can include multiple part sources that are allowable in our ERP system and allows the engineer to review each source to ensure it still works with the design As sources for components are disqualified/added, the librarian can do the same within the library assembly without affecting any higher level designs (disqualified parts can be hidden). Datums/Curves/ECAD data is added at the component assembly level and not at the part 'source' level. Some components from manufacturers just import as an assembly and work best that way That is why we have the components as an assembly. However, when we export idx files with components that are assemblies: We get a warning in the log "Could not find a suitable solid geometry for model <XXXXXXXX.ASM>" IDX and EDA geometry in the ecad t
With ModelCheck Interactive you can run ModelCheck on an assembly and the related sub components within that assembly. However, you need to go check each sub component drawing 1 by 1. Please add the ability the check drawings with same name for all levels of the assembly.
Please allow selecting, activating, and deactivating cross sections while in Mechanism mode. Today this is unavailable. The current workaround is: Activate a cross section Enter mechanism mode Run the analysis Save the analysis Leave mechanism mode Select a different cross section Re-enter mechanism mode Re-load the previously saved analysis Steps 4 - 8 could all be avoided if we could just select a different cross section while still in Mechanism mode.
Please update the Creo Save a Copy of Assembly command: Support for options related to objects declared for a Notebook (.lay) Clarify how Copy Drawings works by adding "with same same" The Save a Copy highlight selection is difficult to see and is not visible if object is hidden behind other parts. Please use the normal Creo selection highlight used elsewhere in Creo. Add "Configuration Queries" from the Model Tree Search to Save a Copy search. Add a "Declared to Notebook" to both searches. This will make it easier to Save a Copy of flexible assemblies that use ProProgram and/or Notebooks (.lay). Screenshots from Creo 4 M090.
In Creo simulate, While adding new Material from model properties, Material definition dialog box pops out of system screen when more information is given in that model. So that no scroll bar also, to see the information which is goes out of screen, It will be user friendly when the Scroll bar is introduced in the material definition box, Thank you.
Toolkit APIs ProSolidFacetsetVisit & ProFacetsetFacetVisit enable traverse FacetSet Features and associated Facets in a Creo Model. While Creo CAD itself has the capability to read/display FacetSet Features along with Colors, there is no suitable API to read the Color information off Facetsets/Facets in the Model. This is a critical requirement for Toolkit users who work with various types of geometry including Precise, Tessellation & Hybrid.
We have a need to use ProProductviewFormattedMdlnameExport() to export to Creo View specified child models of the current assembly while using different recipe files. ProProductviewFormattedMdlnameExport() lets one do an export of any part or assembly that is currently in memory. It allows one to specify the name and the directory of the exported Creo View file. A ProProductviewExportOptions object is also an input argument. It is used to specify the type of output (ed|edz|pvs|vpz). Currently the only way to specify that a recipe file other than the default ed|edz or pvs|pvz recipe file be used is via a config.pro option like "intf_out_pvs_recipe_file". Unfortunately, setting the config.pro option to point to a recipe file and then changing it again to point to a different recipe file does not work. I have implemented a workaround that involves pointing to a temporary recipe file that I overwrite as needed. Before calling ProProductviewFormattedMdlnameExport() I have to overwrit
It should be possible to create extrude, revolves, by existing curves, edges of surfaces. see the next example:
Hello! I created a pattern using OTK Java and FET. Now I need to exclude some of the elements of the pattern (just as is done with Creo). For example, I have the pattern created using Java OTK and FET: This is what I need: 1) disabling pattern elements. 2) the result that I need: Since I created this element using FET, I know that it has a certain structure, the elements of which perform certain functions. Therefore, I created the pattern without excluded elements and unloaded its tree into a XML-file.And then I did the same with the pattern with excluded elements.I compared two XML-files and they turned out to be the same.From this I concluded that OTK Java + FET cannot exclude pattern elements. Although this feature may be useful in some cases. Best Regards!
Suggest adding functionality that auto-populates a ZONE field in the revision block of a Creo drawing, similar to what is available in SolidWorks. This is illustrated at time 1:24 of the following Youtube video - https://www.youtube.com/watch?v=g76cjgGIT28 As illustrated in the video, when a drawing revision symbol is placed on the drawing, the ZONE field is automatically populated with the drawing zone where the symbol was placed. This functionality is currently not available in Creo Parametric.
It is possible to move an custom symbol horizontally in a drawing. It is just necessary to select the handle (see "1." in file "example1.png") and move it e.g. to the right (see file example1.png). In 3D (.prt/.asm) it is not possible. With "move" command in Context menu you can move the whole symbol, but the length of the auxiliary line will not be changed.
It is not possible to reference a user-defined symbol with an offset, e.g. to a dimension or something else, because the placement option "Offset" is not available. If I move e.g. a dimension, the already placed symbol remains. (see attachment examble.png)
Simplified reps in large assemblies can really help by allowing subsets of the models to pulled opened into session. Only one of the assembly simplified reps can be in session at once. If you are using different simplified reps on a single sheet this means that even moving your mouse across a drawing view can cause Creo to stop and reset the current simp rep in session to match that view then do it again as you move your mouse across another view. Currently I have users move the view they need to work on to a different sheet, do their work and move it back. This involves needing to change sheets several times slowing things down. Before that PTC's recommendation was to put each view on it's own sheet but that just isn't practical at times. I would like to be able to set views to "Inactive for Selection" to avoid this issue. To work on a particular view you would Activate it and then you could deactivate it again when done. A small icon or other notification of the Inactive state
I could have sworn I used to do this in the past but the PTC people reassured me it's never been utilized before. When creating a sketch and you want something to be constrained symmetrically about a center line you currently have to dimension the line endpoints/center points then add the constraints after (dimension A to C; constrain A,B,C). What I'm proposing you do is automatically add the symmetrical constraint to an item when creating a dimension based off a center line (dimension A,B,C; symmetrical constraint is created automatically).
It should be possible to associate a jlink program to a file (assembly or part). With this we could have an easy interface for our templates, or having some different changes in the model, with more advanced programming. See one example https://youtu.be/2EChOdicj-s
With Creo Parametric 3.0 M190, I need to create a PRT drawing in English for consultation, and an ASM drawing in French for manufacturing. How to have 2 templates DRW with a different language (text of the views, ...) ?
I want to add a function that can hide part of the model on the drawing.
When we change the transparency of a component or quilt, is dificult to see their edges. So it should be possible to change edges colors of transparent elements, as a configuration. There is a workaround for this, but not very productive: CS212205
Even if the same symbol is used, an additional number (*) is appended to the symbol name.If the symbols are the same, please improve them so that the additional number (*) is not added after the symbol name. .
Custom symbol pull-down menu I want you to change the order of symbol names in the order you used them.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.