Recently active
Hi, is the current lmadmin upgrade path, really uninstalling the old version and installing the new version from scratch?In the past the setup recognized the old installation and upgraded it. at least a few years ago.br Bernhard
Hello all,I noticed that after creating the drawing changing font of the annotation doesn't affect the embedded symbols like plus minus sign or diameter sign. For example dimension font is set as arial WGL first:But setting it to CG times, only the dimension numbers (23 and 0.1) is changing but not symbols:Is there a way to set font format for all symbols effecting the annotation on drawing?Thank you for your support.Have a nice day.
I am using Creo 9.I have received a large step file with over 1k components, I have imported it successfully and now I need to rename some of the files. I tried to use "Use template" option - no matter what I choose to do - the generation of file names would wipe out all of the values in the "New File Name" column (see screenshot attached). I tried asterisk symbol in front, at the end, or both in front and after the characters i need to replace; i also tried using suffixes and not using suffixes for the new file name. I also tried File > Save, edit file list in excel, and then import it back, but it doesn't apply the renaming when importing.I see most of the problems with file names being too long, but I can't remove sections of file names using template. For example, i need to replace "STEEL" in the names of the files with "S" in 200 files, but no matter what I do I can't make it work. If i use "Template" then it wipes out all names, or if I Export the file nam
I am using Creo Simulate Release N/A and DatecodeN/ADie Modalanalyse ergab 58 Eigenmoden. Danach möchte ich eine dynamische Analyse im Zeitbereich machen (um die Erregerkräfte in die Struktur einspielen zu können). Wie gewohnt natürlich im Reiter "Vorherige Analyse" die besagte Modalanalyse gewählt. Weiters möchte ich die Dämpfungskoeffizienten für jeden Eigenmode individuell eingeben ... also dementsprechend eingestellt ... und ich hätte erwartet, dass ich nun 58 Eingabemöglichkeiten bekomme. Leider wurden mir nur 4 Eingabemöglichkeiten (für die ersten 4 Eigenmoden) angeboten.Woran könnte dies liegen?Habe derartige Berechnungen schon öfter gemacht und konnte bis jetzt auch die Dämpfungskoeffizienten immer individuell einstellen.Danke schön für Hilfe.SG Markus Plainer
Very confusing interface.Needs lot of learning and practice to use.Improvement needed is : It should be as simple as Excel or equivalent.1. What product and version are you running?I use Creo 9 and Creo 10 both. Have used all ProE and Creo versions starting from ProE WF-32. What is the problem?Creating and editing BOM Table takes lot of time. Being an old Pro user, we can manage it.But new Users does not like the old school method of adding and editing tables in Creo. New Users are more familiar with the new intuitive UI based and dropdown based editing rather than selecting options through Menu manager. They always compare it with Solidworks BOM table.Even Autocad now has improved the table creation. In Creo it is still the same older method and no improvement after this many years. BOM is something where engineers spend most of their time and it should be easy and fast, mostly for new beginners. Because Pro-users are not immortal 😁. They will be repla
I am making a spline in a part based on a large collection of points I am creating from a file. When I assemble this part into an assembly I want to know the location of these points relative to the assembly coordinate system. Is there a way for me to measure the x,y,z distance from the assembly coordinate system to those points all at once instead of having to do hundreds of individual measure commands? Creo Parametric 8.0.5.0
Creo Parametric 10.0.5.0 I am trying to create a plug weld. I have had success with several on one side of the weldment, but when I try to create the plug welds on the opposite side the weld seems to project to the opposite side. I have tried using the opposite surface of the red surface, but it just projects to the opposite side of the weldment.
to whom it may concern... Hi there, I recently installed Creo Parametric 10.0.8.0.As it turned out, the debug console, you can activate by adding "set CEF_DEBUG_PORT=9222" to your start command is broken in the latest release of Creo 10. Usually, You get debug information displayed, when You open "http://localhost:9222/" on the computer running Creo Parametric.In 10.0.8.0 that address just shows a blank page (NO "This site can’t be reached" error !).In 10.0.7.0 everything works as intended. I tested this on several machines. Also tried to install both versions parallel. But to get the console working again, I had to uninstall Creo completely and reinstall 10.0.7.0 again.
Hi all,I want to information on the layer hidden item. Why some items are in this layers and why when i move this items to the others layers like show item layer and i save the layers state,I see the item correctly on the view of drawing but if i save the modifications when i close the draw model et i open this after, this modifications are not save.I add screen shot toexplain my requestSteo 01Step 02 Step 03
Customizing the pop up/hover display of creo parametric model names in the graphics window to include an additional parameter such as Title or PTC_COMMON_NAMEIs this just straight up an enhancement or is there a current customization method freely available?For example. In my screenshot it shows: SYNTAX -->ITEM:F#(FEAT TYPE):FILENAMEOn Screen --> Edge:F5(IMPORT FEATURE):601301I want to show the same plus an additional Parameter to the right of FILENAME such as PTC_COMMON_NAME as in my mockup (Green Box) below.
I am having an issue with printing Creo drawings. Every time I print a drawing, the print comes out with a very thick outline. I am attaching pictures to better explain my issue. The left picture shows a drawing view, and the right picture shows the print view. I recently switched from SolidWorks to Creo and never had this issue with SolidWorks, so I don't know how to fix these outlines. Any help would be greatly appreciated.drawing viewprint view
I am using Creo Parametric Release 11.0 and Datecode11.0.3.0Is it possible to factor in gravity in cabling design to get a more realistic representation of slack and mass effect? I haven't found any related article or post in the community.
I am using Creo Schematics Release 11.0 and Datecode11.0.0.0dovrei disegnare uno schema 2D di un impianto frigo (moto-condensante)Non ho trovato un tutorial riguardo ad impianti idraulici o frigo. esiste?Creo Schematics è lo strumento giusto?
1. Describe the ProblemShared models are the same models. So it is impossible to display them in different configurations. Also if 2 shared assemblies are contained in a main assembly, it is impossible to display them in different configurations. Like displayed below: The main assembly "Layout" contains 2 shared assemblies: "Bgr_1" and "Bgr_1.1". Both shared models have 2 configurations.Konfig_1_mitte:Konfig_2_oben_rechts:The main assembly cannot display "Bgr_1" and "Bgr_1.1" with different configurations. By merging or activating configurations both sub assemblies "Bgr_1" and "Bgr_1.1" can be displayed either in configuration "Konfig_1_mitte" or "Konfig_2_oben_rechts". The product idea is the possibiliy to merge different configurations of shared assemblies. So you are able to display the main assembly "Layout" like: 2. Are you using a workaround?There is no workaround.3. What is the use case for your organization?We develop configurable machines with automati
1. Description of the ProblemFor surface finish annotations, we are currently using the ProSurffinishValueGet() function to retrieve the associated property.However, we have observed that depending on the symbol type (e.g., ASME or ISO), the function does not return the expected values. Specifically, the roughness_height field is not available in some cases, and other fields such as surface_texture_requirement may contain only text values.Would it be possible to obtain the roughness height value (as a double) directly from surface finish annotations, such as those shown in the attached image?Additionally, we would prefer an API that is specifically designed to access this data, rather than extracting it from general symbol instance properties.Below is an example of a surface finish symbol where the function fails to return the expected value. 2. Are you using a workaround?No, we are not using any workaround at the moment.3. What is the use case for your organization?We need to val
1. Describe the Problem I would like the ability to change the light blue display color when selecting "Model" in the results display.There is no color scheme, so the color cannot be changed, making it difficult to see. I can change the other display colors, but I cannot change this color. 2. Are you using a workaround?Checking the shade box makes it a little easier to see, but I'd like to see it in wireframe as well.3. What is the use case for your organization?Use this when you want to check the deformation state.4. What impact does this problem currently have on your organization?Inconvenient for some users
1. Describe the ProblemWhile merging Harness Part2 with Harness Part1, the network from Harness Part2 to Harness Part1 moved, but the network continuity is not established.ASM 1 Harness Part 1ASM2 Harness Part2We expect to have network continuity while merging the Harness parts,2. Are you using a workaround?Currently, the network location is manually merged.3. What is the use case for your organization?Due to the diversity of products, we will create multiple harness assemblies and merge them later to calculate the overall length of the cable. In this case harness part should have Network continuity.4. What impact does this problem currently have on your organization?Our objective was to have a single harness assembly component for the vehicle product.
1. Describe the ProblemMerge harness, when connectors are in the Group, is not moved to the Active Hereness ASM.ASM 1 Harness Part 1ASM2 Harness Part2 Group (Connectors are in the Group)For example:- With the above Test DATA Structure, while merging the Harness Part2 with Harness Part1, the connectors from ASM2 Group are not moved to ASM1. 2. Are you using a workaround?Manually user must move all the connectors from AMS2 to ASM1 in this scenario.3. What is the use case for your organization?Due to the diversity of products, we will create multiple harness assemblies and merge them later to calculate the overall length of the cable.4. What impact does this problem currently have on your organization?Our objective was to have a single harness assembly component for the vehicle product.
Hello, I just wanted to ask if there is a way that I can adjust my line thickness while using the HLR mode? let's say there are some parts in the model where I want thicker lines and other parts of the model with thinner lines. Thank you
As a disabled user with only one hand, I need a way to setup Creo Parametric to only use Mouse buttons for PAN. This is the only function that I cannot seem to find a work around from Shift + RMB to PAN in my model. Yes, I can use the Pan icon and have been doing that, but it is extra clicks and impacts productivity. Other CREO PTC applciations have the ability to modify and control the Pan/Zoom/Rotate features (Creo View, Creo Elements etc), Creo Parametric does not have this ability for those of us that need accomidations due to physical disability and limitations. When will this be fixed for the user community?
Hello, Looking for the information to import the wirelist from Capital(Mentor Graphics). i am trying to use wire information from capital harness and creating 3d cad in creo. I have downloaded the xml from creo but when importing the xml getting below error message. these are the file extension i exported from mentor graphics.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO 8.02. What is the problem?Our company is in the early phases of implementing MBD. One of the issues we are finding is that we can not change the "start part" template for already existing parts and assemblies, which means we have to create all the combination states (following MIL-STD-31000) for each existing part. For new parts, it should not be an issue if we change the company "start part" template to match the MBD "start part" template, but for older parts it is a pain to have to recreate all the combination states, unattached notes, title block, etc.... Can we please create a way to either:1. Copy a part (Save as) and give the option to change the start part. OR2. Be able to import combination states with all the notes, title blocks, etc.Both options seem better that recreating all the combination states from scratch for existing parts.3. Are you using a work
I am using Creo Parametric Release 8.0 and Datecode8.0.3.0I want to be able to snap a new line in sketch mode to a custom palette symbol without have to break the symbol into draft entities.
1. Describe the ProblemThe annotations are important for mold manufacturing team. And the parts are assembled using the coordinate system form the mold not the default. It is important to be possible unable the annotations option on the export step and an the same time, using a non-default coordinate system. 2. Are you using a workaround?Export to pvz and install creo view on the others departments to see the annotations and export also to step withot annotations to choose the coordinate system.3. What is the use case for your organization?Turn the non-default coordiante system when exporting the 3D file with note to step.4. What impact does this problem currently have on your organization?Do not export a second file and install the creo view to others departments. Only the step file is created and send to others departments.
I am using Creo Parametric 5.0 5.0.6.0How to configure installation so run Node Locked license before running Floating Server License? A user has a Node Locked license, but also needs access to Floating Server license pool.When user runs Creo, floating license is pulled first. The goal is to pull Node Locked license first.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.