Recently active
The config.sup is for settings that users (or any other config.pro files) are not allowed to change in Creo and seems like a perfect place for corporate wide mapkeys to create standard processes/toolsets. In Creo 3 M060 as shown in the attached video, the config.sup will allow MANY mapkeys to exist in a Creo session but not let ANY of the mapkeys from the other config.pro files (e.g. a users config.pro) load into Creo. It would be way more flexible if the other config.pro mapkeys would load into session as well. Where two mapkeys have the same name, always use the config.sup mapkey. General user config.pro files often tend to get tons old settings and mapkeys built up over time if edited from Creo so superseding user mapkeys where a naming conflict exists help admins keep users using the latest and greatest processes/mapkeys as things inevitably change.Several good ideas were shared in Re: Corporate Mapkeys - Superseding User Mapkeys about how to accomplish this but currently require a
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.1 & Creo View 10.12. What is the problem?Creo View 10.1 has strong markup capabilities and the ability to add other viewables to the session such as PDF's 3. Are you using a workaround? If yes, please describe it.We do not have a workaround. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We are implementing using Creo Illustrate for manufacturing work instructions but cannot fully explain the work properly with the current capabilities inside of Creo Illustrate. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)50+ users have been limited or hesitant to adopt Creo Illustrate since they cannot embed other documents into the platform such as industry/company standa
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.0.02. What is the problem?We need API functionality for our PLM system to provide simple Check In/Check Out functionality similar to how Illustrate checks into Windchill.3. Are you using a workaround? If yes, please describe it.The workaround requires saving then importing into our PLM system which is prone to user error.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The check in would work the same way Creo Illustrate and Microsoft Office checks into Windchill.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This currently impacts 10 Creo Illustrate users and easily causes 20 hours/week of missing files that have to be redone in Creo Illustrate because the files were not checked in and go
[Original title: Creo Elements/Direct License Server20.6にてUserIDが正しく取得できません。] 1.どのような製品とバージョンを実行していますか?What product and version are you running?Creo Elements/Direct License Server20.6 2.問題はありますか?What is the problem?UserIDが14文字以上の場合、UserIDの尾が削られて正しく表示されません。例えば、添付ファイルにはUserID欄にkouta.hachimoと記載がありますが、正しいUserIDはkouta.bashimotoです。If the UserID is 14 characters or more, the tail of the UserID will be truncated and will not be displayed correctly.For example, the attached file has kouta.hachimo in the UserID field, but the correct UserID is kouta.bashimoto. 3. 回避策を使用していますか? 「はい」の場合は、それについて説明してください。Are you using a workaround? If yes, please describe it.いいえ、回避策はありません。No, there is no workaround. 4. あなたの組織のユースケースは何ですか? あなたのアイデアが中断の中でどのように機能するか、またはそれが 実際の状況にどのように適用されるかを説明してください。 What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. 5. この問題は現在、あなたの組織にどのような影響を与えていますか? (影響を受けるユーザーの数、生産性の低下時間
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Cro 9.0.7.02. What is the problem?Unable to export ecad context data from drawing when exporting a pdf file3. Are you using a workaround? If yes, please describe it. No using old school dxf data from Siemens Xpdedtion4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We would use this to better/faster and more arcuate PCB assembly drawings.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We would not be taking advantage of the new capabilities within Creo 9 for ecad context data thus maintaining the current slow process. We could save 10 - 20 per drawing in time spent the current way.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. General engineering. Senior design engineer.2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Currently there is no way to show units in dual dimensions. Suffix can partially solve this problem but only on main dimension. Workaround is adding attaching note to dimension with units or just provide general note in drawing. Also different precision for primary and secondary units in options. 4. What is the use case for your organization? Making drawings with dual dimensioning.5. What business value would your suggestion represent for your organization? Shortens work time.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo Parametric 102. What is the problem? Counterintuitive Flat Patterns in DrawingsI have used Creo for years, learned 3D modeling on it 20 years ago, and was an active user for the next 10 years. Then switched jobs and have been away an equal number of years. In my newest job we are switching from Inventor to Creo, and I couldn't be happier about it. That said we have many new members who have never used Creo or only sporadically used it in the past. A colleague and I just spent the last 20 minutes trying to figure out the correct way to add a flat pattern to a drawing. We finally stumbled upon a helpful youtube video that went over the create flat pattern command, and then the create flat rep command. The flat rep command only does half the job, though. What is missing is that to actually differentiate the new flat pattern rep with the master rep is
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.12. What is the problem?No search function for 2D/3D figures.(see also my question "Search function for 2D/3D figures in Creo Illustrate 10." in the forum).3. Are you using a workaround? If yes, please describe it.In the future we will store all our images (for operating instructions) in a database. All the images will only consits of a 11-digit number. Each image will be connected to a Creo Illustrate file. In the Creo Illustrate file all figures will have that same 11-digit numbers. The 3D figures like 12345678001, and the 2D figure like 12345678001_.So a big Creo Illustrate file will have e.g. 50 figures consitsting only of 11-digit numbers.So, to find an image (figure), the editor needs a serch function (not a filter function) to highlight the figure in the list of all figures.4. What is the use case for your organization? Describe how your idea
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.5.0 with Windchill 12.02. What is the problem?There are some situations where Checkout on the Fly pops up more than once. It can happen during large assembly regenerations, but notably happens when saving a backup to disk while modelcheck has things to do on save. In these cases, especially when combined with Modelcheck, you can get Checkout on the Fly, one by one, for every object in the assembly (because it's becoming "modified in session"). One - at - a - time. When this happens you can't even interrupt the process. You're stuck in it for the long haul, or you exit with the task manager. It needs to wait, see what all is affected by the entire operation, THEN present you with the checkout options. (function() { var wrapper = document.getElementById('lia-vid-6352472817112w996h540r373'); var videoEl = wrapper ? wrapper
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.12. What is the problem?When using Creo View to open Creo Parametric native drawing that has multiple sheets, Creo View will only open the first sheet. All other sheets show as Blank with no data.3. Are you using a workaround? If yes, please describe it.Yes, the current workaround is not really a usable process but it requires the user to first open the Creo Drawing and update all sheets of the drawing before saving to disk, once this is done the drawing can be opened displaying all sheets correctly in Creo View. This workaround is time consuming and completely makes the ability to open a multi-sheet native drawing in Creo View unusable.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Ability to open the native drawing and all sheets correctly or provide a
1. What product and version are you running?Creo View and Creo View Adapters 10.12. What is the problem?The "Assigned Choices" for Configurable Product components are not visible in the Windchill published viewable.3. Are you using a workaround? If yes, please describe it.No workaround in use for this issue. Non-linked configurable products (not Windchill linked to a variant specification to prune the assembly) use an assembly parameter to track the options available. This parameter is added/updated manually and is prone to mistakes.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.As more of our models leverage Configurable Products with Variant specifications, the assembly parameter is no longer updated but we would still like to be able to see the options in Creo View. Instead of copying over the assigned choices into an assembly parameter, it is preferred to just display the choices available.&
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.4.02. What is the problem?Drawing/Model detail option setting - 'datum_target_area_multiply_sign' set to "capital_x" (default) - not in conformance with ASME Y14.5. ASME Y14.5 states that, in the Use of "X" to Indicate "By", a space is to come before and after the X. The Creo solution for the "capital_x" option value does not provide such spaces for the target area types of Rectangle and None. This misalignment also exists pre-Creo 9 - a detail option to change the display doesn't exist, but the standard display for Rectangle and None target area types does not include spaces before and after the "X" symbol.3. Are you using a workaround? If yes, please describe it.Workaround could be to manually generate local note to supplement symbol display in order to get full specification to align with ASME.4. What is the use case for your or
I just want to be able to undo anything I just did in any area of Creo (like every other program I have ever used). Details: Currently it works really well (as it is supposed to) in Sketcher mode but other than that it is closer to a joke. First day I train a new person to ProE/Creo I tell them save often and don't expect the undo command to work (when it does work it is like winning the lotto). I go to move multiple draft entities but because it may be a short line I selected Creo assumes that I wanted the endpoint and it ends up extending the line in an impossible way to undo (even when I still have it selected I cannot unselect it...it is too late)...I cannot undo! I think we could all add our own examples of not being able to undo in various areas of Creo, so feel free to add some more in the comments area. Please make undo work in all areas of Creo.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Marine 2. What version of Creo Parametric are you currently running?Creo 5 moving to 8 soon 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Ease of use in cabling UI It is frustrating when launching a new session of creo, i go to route cables and they get routed outside existing bundles. I have to cancel out and go to the SETUP and throw that switch every time i start a session. Can you move it to the ROUTE CABLES dialog? 4. What is the use case for your organization?removing wasted time5. What business value would your suggestion represent for your organization?remove wasted time
Cabling Location points are hard to see (See Location Points.png). The Edit Definition look of location points were updated with Creo 7 and that looks really good (See Creo 7 Location Points.png). This request is to extend the location point visibility function to make the default points more visible as well and make this the same for all location points. Possibly make edit vs the default points highlight in a different manner for distinction.
Please include detailed documentation such as screenshots, images or video.Add ABOUT.. to the terminator table dialog-shows the last known path, file name & date the .csv was loaded.1. What product and version are you running?Creo Schematics 102. What is the problem?want more information about the terminator table used and when it was loaded.3. Are you using a workaround? If yes, please describe it.none4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.save time and organizing the terminator tables5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) i think it would be nice to have. not detrimental to organization.
1. What product and version are you running?Creo Parametric 9.0.7.02. What is the problem?It can be tedious and repetitive to select surfaces to add to an annotation's semantic references to support Model Based design. It would be helpful if there were tools to create an manage "Surface Selection Sets" which could exist as a Custom Group to be able to be selected while defining an annotation or applying model color, etc...There is a related selection tool improvement request which will help, but a "Surface Selection Set" capability would also be a good complimentary capability.3. Are you using a workaround? If yes, please describe it.No, just many many clicks.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.For a relatively small design I needed to select 267 surfaces to include a surface treatment note. Then I will have to click that again to apply a special profile tole
From time time to time, especially when working with large assemblies, there is a need for a tool in order to quickly investigate the assembly - in term of performance. those will include the possibility to some of the main point of interest such as: Open Performance Open Summary Details of the Open Document File Previous Version References Modified on OpenDisplay Performance Graphics Triangles Shaded Image Quality Display Speed Appearance Components Far from OriginRegen Performance Regen Data Unavailable Regen Report Mates Assembly Regen Report this tool will enable the user to identify issues quickly and improve software usage and satisfaction.
When importing a non-native file, in my example from Inventor, the assigned mass properties are not being transferred to Creo.Feedback from PTC support is that this is technically not possible.Screenshot showing assigned mass prop in Inventor:Trying out the sollution first suggested in the support article did not seem to be working. This product idea does suggest continuing with such a technique.If the assigned mass property would be copied to a designated custom property in Inventor, then an interface could be provided in Creo Parametric , such as a configuration setting that would enable the value of a fixed parameter (f.e. FINSIHED_WEIGHT) to be copied over as the assigned mass property. Mind that this example above is a simple block, but purchased components that are used as (multi-body) parts need this assigned mass property to have a correct weight in assemblies and further along the line in PLM.Below an example of such a part. Referring to article CS3847
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 - Using DEX (Design Exploration Xtension)2. What is the problem?Branching features are not intuitive. What I am proposing:You should be able to create a branch off of the last checkpoint. You shouldn't need to have a subsequent checkpoint afterwards to branch off of it. Let's say I know that I want to have 3 concepts, each with 3 different sub iterations (1a,1b,1c and 2a,2b,2c and 3a,3b,3c). Today, Creo DEX requires me to make a 4, before I can make 3a,3b,3c. That doesn't make sense - it requires users to create a dummy concept below to get around this... Maybe you could right-click the checkpoint and instead of saying "create new checkpoint" it could be "create new checkpoint or create new branch" and that way it knows if you want to continue at same level or create a lower level option (branch)Going off my example above, what if 1a, 2a and 3a all require
Creo Elements Direct Modeling 18.1 When creating drawings of models with multiple holes in a radial way (e.g. flanges), a pitch circle diameter has to be created and dimensioned manually. It would be very useful to add functionality that creates and dimensions the pitch circle diameter automatically. When the radial pattern changes (pitch circle diameter), this should be updated automatically (associativity). e.g. option in annotation to calculate and show symmetry or center lines
PDF created with CoCreate Drafting/Annotation should contain real Texts which can be copied. Texts could be searched/copied/highlighted from the Document. Documents could be indexed by Adobe Catalog -> Full Text Search Engines can find Contents of Documents.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO Parametric 9.xxx2. What is the problem?The default values in hole charts and hole notes have no relation to commonly used engineering standards. The values for NPT holes and small machine screws (2-56, etc) are especially bad. Editing these charts is extremely time consuming. Considering there are widely used international standards (ASME/ISO, etc.) defining proper hole callouts, why are these not the defaults? Also, why can't you easily switch hole note formats (ie: ASME to ISO and easily save any needed customizations? Software users shouldn't have to learn how to edit obscure tables to accomplish something so simple. Fixing this has been an enormous waste of my time.3. Are you using a workaround? If yes, please describe it.Yes, I'm changing all of the default notes to match ASME/ISO standards by hand. 4. What is th
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Industry: Electrical equipment Design. Role: MCAD Support2. What version of Creo Parametric are you currently running?Creo Parametric 8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Unable to use/select datum points inside a sketch while creating Spot weld. Creating datum points outside the context of a sketch limits you to how you can constrain the points, so creating a datum point inside a sketch is the desired method.4. What is the use case for your organization?Creating pattern of datum points at sketch level and select sketched datum points for the spot weld feature5. What business value would your suggestion represent for your organization?Design engineers need not have to create datum point outside the sketch and have flexibility to create point pattern, also easy constraining of
1. ProMechModel does imprinting correctly when there is an assembly with separate parts in it. 2. When there is single part (*.prt) then imprinting does not happen. 3. Please check attached single part and presentation describing the problem.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.