Recently active
All, As of today you have the ability to set the default memory allocation set the config.pro option sim_solver_memory_allocation to the desired value - with the limitation of maximum value to16384 MB. as today models become more complicated ( lattice, generative design geometry etc ) there is a need to remove this limitation in order to improve performance & calculation time.
Currently, bulk items are not included in the "Recent Files" list. Support says this is because Creo is treating a bulk item like a pop-up and not a regular part taking up the graphics area. Since my team works a lot with bulk items, it would be extremely helpful to have bulk items show in the "Recent Files" list, and not just when there is a save-as. Thanks!
I would like to see better use of the space taken up by the ribbon when creating features. I am using 4.0 M130 and most of of the feature tabs have a lot of unused ribbon space with no option to modify the ribbon. We are required to open a drop down menu to get to many of the functions of the feature. Here is an example of the Project feature ribbon. Why not add the type and sketch selection in the empty space. There is even room for the Name field from the properties tab so that I can easily name the feature.
•Applying a template model to a dependent mirrored part (or allow mirror part with geometry and features with dependency) Creo doesn't facilitate to select the Vertiv start part if the user would like to create a geomtry dependent mirrored part - When mirroring a part, Creo is selecting the default start part instead of using the customer specific MBD start part. Customer would like to use their own start part when creating a mirrored part. related document; Primary Article - CS141966
Problem: We use a lot the solidify feature in regular modeling practices, specially the third option of the solidfy feature, which is the "Replace surface" (ancient Tweak Replace with quilt). Every time we used the feature, we had to imediatly create an extra-layer, if it wasn't already present, to hide what should have been a consumed quilt. The first two options of the "Solidfy" feature, "Fill with solid" and "Remove material" always consume the quilt, so we don't need to create a layer to hide the quilt. Why didn't the third option, "Replace surface" didn't follow the same behaviour, and kept the quilt? It's even more anyoing, since in 95% of the time we will not use the quilt for anything else, so we have to create a layer to hide it, slowing us down, or create an extra feature, the "Remove surface" feature, not forgetting to imediatly selecting an extra option, "Leave Open", just to remove which in 95% of the time should have been a consumed quilt of the solidfy feature. This inco
Can annotations and dimension text "boxes" act like relations? While in annotations, click on the feature you want to reference. The dimensions and parameters for that feature show. Then you click on what you want to add to your annotation and it autom
Today, SI-based devices and prefixes are not in use.See the example in the attached picture.Suggestion: Change MM^2 to mm² Change MM^3 to mm³Change MM to mmChange KILOGRAM / MM ^ 3 to kilogram/mm³ or kg/mm³and so on. M= mega = 1 000 000 m= milli = 0.001 This is a quite big issue for engineers from whole world outside United states. Also see: https://en.wikipedia.org/wiki/SI_base_unit https://en.wikipedia.org/wiki/Metric_prefix Best Regards Per Forsman per.forsman@strongpoint.com
I am trying to add onto a part which opened up from an assembly. I make the thing I was trying to make but the save buttons are all greyed out. Not sure how to fix this any help would be appreciated. The model also had a validation import failure, but I just clicked ignore. Idk if that's the cause but it still won't let me save. Thanks!
I am working on generating a imperial drawing for a part that was designed using metric standards and the Model properties use mm as the base unit. The drawing is using dual dimensioning SECONDARY to allow me to dimension in inches. However the part also has several threaded holes that have hole notes generated. This means that the hole and thread depth are using the mm from the model when bringing it into the drawing (so instead of 1in depth the note looks to appear as if it had 25.4in depth). Is there a way to make the hole note that gets pulled in to use the secondary dimensions of inches that the drawing is using so that it matches the units of the drawing without setting the model properties to inches and updating the note in the model.
Is it possible to block the System colors, Interface and Theme options in Creo Parametric (10.0.6) from unauthorized user changes through config.sup?
Dear Creo users,While doing some complicated sketch don't you think there is a need of linear and circular pattern options in creo sketch? Its true pattern option is given in solid modelling and we can pattern a feature or group of features. In solid works users can pattern inside sketch mode. in creo 3.0 and 4.0 is there any updates on sketch pattern? I am using creo 2.0.With regards,Soumya
1.どのような製品とバージョンを実行していますか?Creo Parametric 8.0.1.0 2.問題はありますか?アーティクル - CS364641にて、CreoParametric5.0以降でモデルチェックレポートのカテゴリが変更になったとあります。現在、新しいUIでのカテゴリの定義ができませんが、できるようになってほしいです。3. 回避策を使用していますか? 「はい」の場合は、それについて説明してください。config.proに「modelcheck_show_new_report_ui no」を設定すると、古いUIでのカテゴリの定義ができることは確認しましたが、新しいUIでのカテゴリ定義はできません。 4. あなたの組織のユースケースは何ですか?モデルチェックのカテゴリは、チェック内容を的確に探すために、大変有意義な機能です。複数のチェック項目を追加した場合、よりそう思います。 5. この問題は現在、あなたの組織にどのような影響を与えていますか?Creoのバージョンアップ時に機能が損なわれました。 本機能の改修についてご検討のほど、よろしくお願いいたします。
Hey folks!Need a bit of help...So I’ve got this huge assembly in Creo that takes forever to open — like 30-40 mins easily. When I peeked into the task manager, I noticed it’s only using a single CPU core, even though the machines/workstations have quad-core and some even octa-core processors. Is this normal for Creo? Or is there some any setting or config tweak I may be missing that can make it use all cores and speed things up?Many thanks in advance.Ciao,Srikar
Hi,I am adding a decal to my part, and as suggested in this ticket, I used the flip decal buttons to correctly align my image. Solved: Invert/Mirror Decal Appearence - PTC Community However, when I go to render my part, the image is "unflipped". When I get out of the render application and back to the modeler, the decal is in the correct orientation. Any thoughts on what can be happening here? Example decal on the part, as seen in the model view Same decal in the render view Thanks!
I am using Creo Parametric Release 8.0 and Datecode8.0.9.0Cannot login in https://app.ar-design.ptc.io. My credentials are correct,Contents of std.err: AR Connection Failed: Request Timeout : Url: https://app.ar-design.ptc.io/ARPublish/creoauth/check_authenticated_access.txtHere are the errors that I facedAR Connection Failed: Request Timeout : Url: https://app.ar-design.ptc.io/ARPublish/creoauth/check_authenticated_access.txt
Hi PTC,I'm using creo6.0 with T1 license, I want to do modal analysis but the function seems unable, the button is gray. My GPU is nvidia quadro p2000 and I have already updated the driver. Please give me some advises, thank you!
Currently all lines of the views in the drawings are the same, and only get to their required state (thickness) during export, when pen tables control how thick the lines are. I would like to remove the use of pen tables and start seeing actual thicknesses on the screen during development of the drawings. I tried playing with line thicknesses in line styles and I think I could make it work. But I only managed to change the line thickness for existing views, however any new model views still default to thin lines, regardless what I set as default line style. I might be using that default line style functionality wrongly because no matter what I do with it it doesn't seem to change anything. Is there a way to set the styles of the lines for new views in the drawings? I would like to set the model edges to be slightly thicker than surfaces (quilts) of cosmetic threads and crosshatches in cross-sections. I am on Creo 9. Many thanks for the help.
I'm exploring using Styles to provide simplified views of large welded sheet metal assemblies. (Eg, hide a chunk of components to show an earlier stage of assembly process, make some transparent for clarity). I'm also exploring modelling welds. Currently I have a lot of floating midair solid welds when I Blank components in different Styles. Surface welds interact as expected with Blank/Unblank, but solid welds stay visible when Blanked through the design tree or view window. (They then have the option to Unblank when selected even though they're still visible.) Checking View Manager -> Style -> Properties, they're not listed. However, if I change the display style of solid welds (eg make them transparent) they ARE listed and I can Blank them from the Properties window, which works. I know I could just use surface welds, but I would like to have the capacity to use solid welds without this workaround. Is there something I'm missing that explains why they won't jus
Dear AllI'm looking for a method to make two parts move symmetrically . I know it's possible to do it in SOLIDWORKS but I don't find the way to do it with CREO.Many thanks for your helpO.Pavot
I'm not sure of the best way to do this, but I know it can be done from a previous job. I would like to create a table where the user can selection options like they would in a symbol and their selections would populate the table. Basically, I'm trying to create a "Applied Standards" table where the user can pick the relevant standards from a list and put them in the table automatically.What is the best way to go about doing this? I don't really see a way to do it with repeat regions or in the symbol gallery.
It should be possible to generate corner radius, like the image bellow. At the moment creo has the ability to generate a corner sphere radius. But it should be usefull to generate a simillar quality radius setback. https://www.youtube.com/watch?v=P57yWtDxlxA
Would anyone know how to model a locking patch screw feature like the one you can find in the STEP files that are available from McMaster Carr with the threads modeled? As the picture shows, there is a very small protrusion coming off the screw threads to represent the locking patch. I can easily create a datum curve and project it onto the threads, which for all practical purposes is sufficient. But I am quite annoyed that I cannot figure out how to actually make it as a protrusion. If McMaster Carr can figure it out, it seems like I should be able to. I find the visible locking feature quite handy to make sure the locking patch is actually engaged with the mating threads. Eternal thanks if anyone has any suggestions.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Reference: Article: CS366849 Case: C16336356 SPR: 13742708 In a typical parametric assembly, if a component is placed using a surface or datum, and then the component's surface or datum is changed, it will automatically update the placement. Apparently this is not true for some use-cases regarding import of EMN/EMP data (from the IDF standard of ECAD MCAD Collaboration). This makes the functionality not parametric in a parametric tool. And there is not even a notification to the user. Even an advanced user would not think that t
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.0.8.0 2. What is the problem?Reference ticket: 16962068 The ecad_hint.map file is being used as the default information to map our components (mostly as assemblies) while EMN files are being read out and written into Creo. However, if the design data is using a slightly different variant of the ECAD_NAME, Creo will STILL export using the name in the ecad_hint.map file. This should not be! It should use the name in the design file itself. Whenever the ECAD tool opens our EMN file, it gets flooded with warnings saying that the package name has a mismatch. We can't remove the component from the map file because we need the map file to map to the correct assembly model. If we put a wildcard ECAD_NAME "*", the ECAD tool still generates a warning: The PCB designers can't read through hundreds or thousands lines of their warning log, trying to fin
Hello, We have 3 jLink (java) applications/plugins correctly running on PTC Creo 7 + Java 8. Now we're testing Creo 7 + Java 11 (because of future upgrade to Creo 9/10 with Java 11). We've compiled plugins files with a same JDK11 but one of the plugins fails running with message 'Startup of application "app name" failed.' Plugins configuration is same, they're using same otk/pfc dependency, same java version for compilation and same Creo 7 instance. I've found this article but most of points are not suitable as other two plugins are running properly. Is there a more detailed log file of creo application startup to see any detailed information what goes wrong when starting plugin? Any other idea how to debug/investigate it? Thank you very much.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.