Recently active
There are various tabs in the "View Manager" dialog, and text appears overlaid on the bottom of the graphics window depending on which option you have selected for various tabs. Text disappears only if a particular option is selected, and this behavior is not consistent, but it would be desirable if it was. Current behavior: Simp Rep: text is shown for "Default Rep", but is hidden for "Master Rep" Style: text is shown for "Default Style", but is not shown for "Master Style" Layers: text is shown whenever a layer state is activated. Text will remain until currently activated layer state is removed/deleted. Explode: text is shown whenever view is exploded, and is hidden when view is not exploded Orient: no text Appearance: text is shown for "Master Appearance", but is not shown for "Default Appearance" Desired behavior: Reverse behavior of master & default Appearance, to be consistent with Simp Rep & Style. Provide option to "deactivate" Layer state, so it is not necess
In Creo 7, there is a way to set a cad model to check the GD&T syntax based on specific standards of the model, like ASME Y14.5-2009 or 2018. The default for pre-Creo 7 models are 2009. However, our company has been following the 2018 standard. It would be nice if there was a way/config to set which standards all files need to follow (whether legacy or not).
I would like to have similar functionality for Creo Parametric Save As function as you have with Windchill. When doing a Save As from Creo Parametric and afterwards check in to Windchill, you get an error as the name of the flat instance already exist in Windchill from the original file. Doing a Save a Copy in Windchill gives you the ability to save the instance with a new name. Right now you can only save the generic Part file and the Drawing under a new name. Not the instance.
Our purchasing team would like to see the 'similar to' of a part so they can go to the same vendors for quoting. Our users like to use the Save-As within Creo, which isn't linked/sent to Windchill. The Windchill Save-As history only shows for items that were Save-As within Windchill itself. We would like this history to show for items Save-As within Creo. Thanks!
I work in metal stamping tools, and we need a lot, radius stebacks, like the ones below: Creo option for radius corner sphere, is very limited to this result. So we need to the isdx extension, to generate this kind of surfaces, with more than 4 sides. In other CAD packages, this surfaces are available in basic packages. What I intend, is that PTC includes this option in base package of CREO, like others. Today we had the need to bought this isdx extension to generate these surfaces, and it's the only command within isdx, that we are using. Very profitable for PTC!!!
The Toolkit does not contain any functionality that allows obtaining the User Name that was used to authenticate in Windchill Server. This information would be interesting to obtain because it would be another way to obtain information from the user (another way is through MAC Address).
Create the possibility to place the ribbon menu at the bottom of the user interface.For people with varifocals, it would be more convenient if the position of the ribbon in Creo Parametric was at the bottom of the screen. The neck is much more relaxed.
Currently it is only possible to update/convert user defined parameters to local restricted parameters (Help Center Link ). This does not work when attempting to convert/update user defined parameters to table-restricted parameters. The table-restricted parameter definition is not recognised if the user defined parameter already exist. The only workaround is to delete the parameter, and then recreate it... but then you run the risk of setting a different/incorrect value which could be undesirabl (especially if the original value coincided with a non-default value of the table-restricted parameters)
Since Pro/Program has not been updated since a long long time and it's too verbose to edit, I would suggest that PTC tries to implement something that is already present in some other CAD packages: Conditional Features Conditional Components (or selectable compoents) Conditoinal Features would be a feature associated with a boolean parameter. If the parameter is false, the features is supressed. If the parameter is true, the features is resumed. This can already be done using Pro/Program, but it's tedious to edit a Part or Assembly to include conditional features or conditional components. Worst yet, not all CAD users understand "programming" to be able to Edit Pro/Programs. But most users can easily select a feature, right mouse click, select a menu that might say "Make Conditional Feature", and in a pop-up window select a boolean parameter to associate with the feature. (or component). Adding the option to "Remove Conditional Feature" to make it a r
It would be very useful for the external Copy Geometry to be able to Copy WHOLE sketches. Currently we have to copy individual lines or circles from the sketch using the reference "Chains" field, or copying points or csys of the sketch using the "References" field. If we add later additional geometry for the sketch, the added geometry is not included, unless we redeine the feature to manually include it. To include the whole geometry of the sketch, and be parametrically associated, we could edit the "Chain" from the standard to the rule-based selection, then we could include all curves in feature, as shown in the next image. But this does not automatically includes all points, and sometimes we use sketch points to define holes centers and want them to be shared across different parts. I suggest including an additional field below the Copy Geometry user interface to allow us to select whole sketches to be easy and parametrically shared across parts (typicall
During the preview of tool motion is only the parametric tool visible. Please add a capability to show the solid tool here. I referee to article CS324954
Please add a new scan type for grove turning. This should be used for automatic creation of "comb" tool motions
The "switch cycle" functionality is only avaible for drilling features. It will be a big enhancement to add this also for turning features.
Only Synchronous applications are currently supported in Java OTK. Otk.jar does not have the required libraries to run Asynchronous applications. This is a step backwards from Java OTK Free (J-Link), which is free and allows both Synchronous and Asynchronous applications.
This idea is to allow ModelCHECK to interact with Windchill to refer to the MC config files, look in to Folders in Windchill for Material Library for material updates.... Because we store all our standard files in Windchill library and will be accessible by all designers globally from different parts of the world.
It should be great to add to Modelcheck / ModelUpdate the functionality to control 3D models views.Actually there is VIEW_INFO & PRT_CREATE_VIEW to create Views in PRT (same in ASM)We need something like:PRT_VIEW_UNWANTEDASM_VIEW_UNWANTEDPRT_VIEW_RENAMEASM_VIEW_RENAMETHANKS !
Add Multi Body part functionality within part-mode, so within one part several sub-parts can we indentified for example a weld-part consisting several tubes in 1 part. Due to the Multi model part the assembly is not needed and external references are avoided. Also copying of bodys within a part is more easy when using Multi bodies. Multi body parts are also very helpfull for creating shell meshes when doing analyses with FEM- software like Ansys Workbench
Hi,It would be useful to have an option to avoid log files when exporting drawing to DXF and DWG.intf_generate_log_file no -> this option doesn’t work for export.intf3d_out_create_export_log is a new option in Creo 4.0 but doesn't work for 2D exportintf2d_out_create_export_log would be greatBest regardsNicolas
1. What product and version are you running?CREO Illustrate 10.12. What is the problem? The problem is that it's not possible to add a second leader to a callout.3. Are you using a workaround? If yes, please describe it. No I haven't a workaround for this, execpt to overlap two callouts.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. Because the same callout could be used to give the same information for both area of the 3D model. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This improvment will add more flexibility to the users to create more intelligent callouts and illustrations.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Product design studio, I'm a senior designer.2. What version of Creo Parametric are you currently running?9.0.1.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.The Modernized Project and Offset Tools in Sketcher is proving to be very time-consuming as it adds many clicks to perform operation that used to be very fast.Projecting or Offsetting a loop until Creo 8 used to require 2 clicks to select the command and Loop, then 1 click per loop. Now in Creo 9 it takes 4 clicks to set up, 1 click per loop plus 1 click to confirm each loop.And, each loop is treated as a single entity where I cannot delete one or more segments of it using Delete segment, which again adds the time-consuming operation of deleting the loop and re-Projecting it as a partial loop.I understand you're trying to improve this
1. Describe the Problem It would be nice if the behavior described in the following video was implemented within the round feature (eg. as a new type of transition) (function() { var wrapper = document.getElementById('lia-vid-6355662017112w960h540r58'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos) Could be something like this 2. Are you using a workaround?Yes, the one described in the video3. What is the use case for your organization?We used to create round on open quilts and we are always forced to create a curve and a trim feature to obtain the geometry we need4. What impact does this problem currently have on your organiza
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10 and Creoview 82. What is the problem?I would like to share a 3d thickness measurement result with a customer via a Creo View file.3. Are you using a workaround? If yes, please describe it.Screenshot4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Exporting mesurement results from Creo to Creoview (.pvz) would be way better then sharing screenshots5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)hard to quantify
1. Describe the ProblemWhen showing reference designations on a drawing, can more parameters be included automatically?Currently all we see is the ref-des using "Show Model Annotations".2. Are you using a workaround?Yes, each ref-des is edited after being shown.3. What is the use case for your organization?Creating harness drawings.4. What impact does this problem currently have on your organization?Time
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo parametric 8.0.10.0 and Creo view Creo View 8.1 and Creo view adapters 9.1.0.0 2. What is the problem?Trapezoid cross sections are used by production department to see details within the assembly but in Creo Parametric created trapezoid cross sections are displayed incorrect and make cross sections in Creo view unusable (The internal details are red and unclear) 3. Are you using a workaround? If yes, please describe it.PTC recommended add a planner section for each plane and show the details in this but this is not wanted work around 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Creo view should show the parts in details when you are creating a Trapezoid cross section in Creo Parametric. PTC acknowledged the limitation in my PTC case and
1. Describe the Problem after saving a drw file as a dxf file, if file name contains uppercase letters, it ends up being displayed as lowercase letters, this issue does not exist while saving as .prt and .asm file. As per article CS122825, we could only pose a new idea in the PTC Community, could you please consider implementing it in the newer version of Creo Parametric? we are now using Creo Parametric 6.0.4.0, but this issue also remains in the Creo 9.0.4.0 as per my testing. 2. Are you using a workaround?manually rename file name.3. What is the use case for your organization?Export Drawing to DXF4. What impact does this problem currently have on your organization?If there are too many files, users need to waste time modifying them.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.