Recently active
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Not relevant to the subject idea2. What version of Creo Parametric are you currently running?Not relevant to the subject idea3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We have seen this specified as a contract deliverable requirement for defense contracts. There is currently no way to geometrically represent the LMC or MMC in Creo Parametric. The LMC and MMC states could be represented by transparent overlays or by separate representations. The nominal dimension must not be changed in order to illustrate the LMC or MMC state.4. What is the use case for your organization?In order to support design reviews and detailing using Model Based Definition, Creo Parametric should be able to illustrate LMC (lease material condition) and MMC (max material condition) based on defined
1. Describe the ProblemWe need to be able to solve generative design on a single component that is within an assembly. I am aware that this will require adding contacts (at least bonded) for components in the assembly. It is very difficult, time consuming, and error prone when taking an assembly where a component is supporting multiple other components and convert that into a single component with multiple point masses and loads.2. Are you using a workaround?The workaround is to use other topology optimization software where assemblies are able to be used.3. What is the use case for your organization?The most basic example is a bracket which is supporting a few components. If you could include those supporting components and their material definition into an assembly, it would be far easier than trying to set up a system based on a single part.4. What impact does this problem currently have on your organization?The impact is that it takes users out of Creo Generative and leads to peopl
1. Describe the ProblemYou are editing dimensions, you can see that 68 dimension is Locked because it is red, but you cannot see that 70 dimension is "driven by relation" since you try to change the value. I propose to give a different color to dimensions "driven by relation", and give a message when you mouse over it. Thank you2. Are you using a workaround?When you go to edit the dimension, you get the message that "dimension is driven by relation"3. What is the use case for your organization?We work with models that are created by any user of the Company, so you do not know which dimensions are driven by relation and which not, when you are changing dimensions.4. What impact does this problem currently have on your organization?The impact is for all the Companies that use dimensions driven by relation, that is a usual practice.
1. Describe the ProblemWe are working on Pro-Piping automation projects using SmartAssembly. But we have limitation to automate in pro-piping module as there are very few API's available for different functions.2. Are you using a workaround?So currently we are using UDF method as a workaround to create pipeline. However we are asking user to manually create the Solid Pipe once pipeline is created as it is not possible using UDF or Mapkey. We also tried using Mapkey to execute other functions in Pro-piping Module but it is not effective.3. What is the use case for your organization?So Basically, We plan to automate the pro-piping activities in Creo using SmartAssembly which will be only possible if API's are made available. This will ease the daily repetitive tasks of creating pipes. In our organization, different Business work on Pro-Piping projects.4. What impact does this problem currently have on your organization?Productivity impact due to more manual work which if automated can sa
When using insets (detail views of part or subassy's) one would expect that the inset could be set to a certain scale. In and until Creo illustrate 6.1 it is not possible to set an inset to a specific scale. My idea would be to implement and scale factor according to the main imported 3D file.
1. Describe the ProblemProTextStyleFontGet() returns PRO_TK_GENERAL_ERROR, if the text is having a mixed font.If Creo-Parametric allows you to set the Font on individual characters, then there should be an API to read the Fonts for each characters or at least by grouping the characters of Mixed fonts. 2. Are you using a workaround?No, there is no workaround to get the mixed font from the text style.3. What is the use case for your organization?We are reading the Font of the Text and applying the same font to the text in our application, so that user see the correct Text style in our application4. What impact does this problem currently have on your organization?Since there is no API to retrieve the Mixed font name of individual characters, Mixed font text strings are rendered using single Font which creates inconsistency with Creo Parametric visualization
1. Describe the ProblemHi, I am planning to use Creo 3d model to embed in website design, need Suitable formats like GLB and USDZ. Need direct export options from 3d and also from the AR model generated. 2. Are you using a workaround?Trying to use step file to convert the files in other software but didn’t like the compatibility of it as it looses the environment setups etc3. What is the use case for your organization?It will be a helpful option in future for many industries4. What impact does this problem currently have on your organization?Not impacted at the moment but can added better user experience
1. Describe the Problem I am working in a software company. Our customer wants information about the semantic surface finish; however, we do not have sufficient APIs for it. We request the addition of APIs for surface finish information, such as MATERIAL and LAY_AND_ORIENTATION. All the properties we need can be set via the UI in the attached image. 2. Are you using a workaround?We are now using ProSurffinishValueGet(). However, it can get only double value set as roughness_height, which is defined in .sym file.3. What is the use case for your organization?convert to our file format.4. What impact does this problem currently have on your organization?We are unable to save sufficient information in our formatted files.
1. Describe the ProblemWhen a drawing of a harness is made and views need to be BROKEN VIEWS, the cables shown will not be solid. This is what creo looks like while setting up the broken view and this is what it looks like when complete. (no solid break)we would like to see them treated like solids that have edges. 2. Are you using a workaround?no not at this time, but you can manually sketch some lines and relate them to the view.3. What is the use case for your organization?creating harness drawings that are really long are truncated4. What impact does this problem currently have on your organization?minor issue but starting to get pushback from manufacturing.
There was a time in which skeleton model could not be a family table; now it is possible, but why flexibility (very similar to a family table "on the fly") is not ? Not possible to define or predefine a Flexibility for Skeleton Models If a skeleton model is opened, access to >File >Prepare >Model Properties >Tools >Flexible mentions: the information is not available If right click is done on a skeleton model in an assembly, drop down menu does not give access to Make Flexible capabilityA workaround could be using a regular part as a skeleton model (in the past it was a common workaround to bypass the fact that family table function wasn't available for skeleton models); I don't know the reason for such limitation. I would use it to manage different assembly configurations without the need to create (and manage in Windchill) any instance and/or WTPart.This function will reduce the time spent in ma
it would be great if you can do the translation directly in illustrate and don't have to export a zip, open it with notepad++, translate it and then import again. customers mention this over and over again
基板CAD Allegro PCB Designeでパターン設計をしているデータをCreo View(以下CVと略)データ(.edaデータ)に変換したところ,ネガで設計したクリアランスやサーマル接続部が欠落し接続の有無が判別できなくなります。 データが欠落しないようCreoViewの改修をお願いします。 本件は、ケース番号 15354546 で対応いただいているものですが、 貴社サポートサービス担当者より、製品のアイデア(エンハンスメントリクエスト)に投稿するよう勧められ、 記載します。 以上
According to PTC support Creo does not allow to display 2D representations of datum coordinate systems to conform to ISO 5459. Creo does not mark the CS origin of coordinate systems with one axis normal to the sheet/screen with extensions of the axes and a circle. For ISO conformance it is also necessary to be able to rename the axes (X1, X2, ...) (section 7.9 in the standard). It should also be possible to place the CS tag (possibly via show/hide annotations). The Creo (3D) coordinate systems already looks very similar to the 3D representation of datum coordinate systems in ISO 5459. The suggested improvements regarding the axes naming and CS tag placement apply to 3D coordinate systems also.
It would be great if there was a ModelCheck check that would catch the presence of unattached features. It would be great if this check could catch unattached solid features and sketch/surface features. For example we have a specific problem in MBD models where we create designated areas on a surface, that surface then has draft applied to it and the designated area is no longer "on" the surface. This can be hard to detect visually and having a check for it would be very helpful.
The new ModelCheck GUI in Creo 5+ is a nice enhancement over the previous GUI. However, by default not all info is display to users automatically which wastes time / creates extra clicks. There is a hidden config_init.mc setting MC_REPORT_SHOW_ALL_TAB that solves this problem. Please make this setting not hidden and consider making the default yes to use the helpful 'All' tab. See images below. Current: With hidden config_init.mc setting: MC_REPORT_SHOW_ALL_TAB YN Y Y Y Y
Apparently, if there is a shaded view in a drawing, and you generate a dxf, the shaded views are exported as images that the dxf uses. However, if you have windchill and are using the cadworker to generate the dxfs, those image files are not available to download with the dxf. Therefore, we need some way to check for shaded views in drawings before they are released and the cad worker generates dxfs. Thanks!
Actual functionality of SHEET_SIZE_INFO (Sheet Size Information) lists the number of sheets in the drawing and their respective sizes. We have a need to identify if different format sizes are used in the drawing to keep consistence with some of our internal processes that require that all sheet size are the same. Either to modify the current check SHEET_SIZE_INFO or to create a new one that mark an Error or Warning if different size sheets are used in the same drawing.
When you change the size of a drawing from A4 to A3 for instance, it could be useful to be able to move all the drawing views together within the drawing sheet: Thank you very much
Hello my dear brothers and sisters, Can you please bring the enhancement of opening part/assembly linked drawing from part/assembly model directly without finding it in the working directory. I hope it will give benefits to every customer
Hello my dear brothers and sisters, Is there any chance to bring the hole feature enhancement in future. like 1)we can create multiple hole in single command 2)call out note should be match to the counter bore and counter sink profile along with that its parameter should be added to the hole feature so that we can save the space in drawing sheet.
Insert a line in config.pro to automatically check the "Make Feature Dependent" when inserting a UDF.
Add a check in Modelcheck that can flag assembly hole or cut features that do not intersect any parts in the assembly. This would enables users to get control of one of the worst sources of slow assembly retrieval.
I would like to be able to freeze the equipment built (I wish it would become no- more parametric) and that will only be modified in some details that the parametricity of creo could damage. Does anyone have any idea how to fix it? also I would like to use sketch as autocad implicitly (sometimes we draw difficult section to estrude) thanks to all
Add the ability to flip an aligned constraint. Many times, when assembling a part by mounting holes, the second hole set is aligned in the wrong direction. The aligned constraint must be disabled to rotate the part ~180 degrees and then enabled.
I would like the PSF file location to be variable and set from the config.pro or sup. Reasons The config.pro already does this and it is very useful so this is not a new concept. At my company increased access control is making it more difficult to update individual users. The individual users do not have the ability to change the PSF file since it is in the programfiles area. If the PSF file could be located somewhere else that does not have file restrictions no admin would be required. PTC changes license names so the pdf files need to be updated. My company changes license servers due to maintenance or sudden failure. Right now if an emergency happened we would have a delayed response due to the access problems. I know there are other ways to solve this problem but the less work arounds the better for all.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.