Recently active
When creating dimensions in drawing operations We have to press ctrl too much. I want to go back to the dimension generation method of wf 5.0
Currently (up to Creo 7) the Creo hole note is attached to an edge of the hole feature by default. It does not add the hole surfaces as sematic references. This idea is to re-write the code so that the hole note attachment picks the hole surfaces and automatically adds these as sematic references for MBD (Model base definition) purposes. Currently the user has to go in and redefine every hole feature to add those surfaces. See attached video from PTC.
If you replace a part in a assembly by a part of a interchange assembly you have only two columns for part name and common name shown in the dialog. Is it possible to view the parameters defined in the parts in the Model Tree so that you have more information to decide which model to use to replace the existing model?
This is a follow up to Article - CS179417. Currently (through Creo 7) when the user selects the "Show Model Annotations" in MBD annotations (dimensions) appear on the screen. The user can not select these dimensions if the Annotation Display toggle is turned off however. This leads to user frustration. The user is given no feedback as to why the dimensions can't be selected. The idea is to either: 1. Allow the user to select the annotations / dimensions even if the toggle is turned off and then have them disappear upon the next screen refresh 2. Have a pop up warning notice that suggests the user turn on the Annotation Display toggle so that the dimensions can be selected.
Threaded Hole Enhancement: Create a standard feature type, similar to threaded hole, which incorporates a simple extrude and a threaded hole to create the standard "threaded boss" feature with sequence of placement and reference handles. Options to include:Boss shape: square, rounded corner square, roundTop options: flat top, fully rounded top The current solution in Creo 4 M060 (and our corporation is not on it yet, but will be the same in the latest Creo 7 version as well) is to either copy the features or use a User Defined Feature to re-create them across models, however these options do not provide the ease of use and modification that the standard hole type feature could.Use Case:These kind of features can be repeated 100 times in a finished casting model, varying size, thread size, shape, etc.
See attached GIF. Currently when doing a drawing, you can select multiple dimensions and move them together. When working with 3D annotations in the model however, if you select multiple dimensions it only moves the last selected dimension. For complicated parts where multiple dimensions need to be created it can take large amounts of time to reposition all of the dimensions one by one as a new one is added.
Currently when geometry is created, Creo does not add the surfaces as sematic references to the dimensions that control that geometry. Per PTC: The Product Manager confirmed that this has been requested by customers before. It has been explored as an option to include but the decision has been made not to add. For simple geometry such as a block, it is easy to identify the correct surfaces, but as sketches become more complex, the automatic addition is not as robust. So rather than adding wrong or unneeded references which would need to be removed, you will need to manually add the references. This idea is to change the behavior so that simple geometry (ie blocks) for which it is easy to add sematic references to go ahead and do so. Certainly for us and I suspect for the larger community there is more blocky geometry than not and auto adding these surfaces would save time.
I would like to see a balloon snap line option to create a "free floating" snap line. The only options available are offset from view boundary and off set from object (any straight line on view). We can drag the ends to shorten or lengthen the line, but cannot change the angle. There are many times that I want an angled snap line to arrange balloons between parts in an exploded view but am limited to whatever angle I can find in the view.
I just changed the orientation of an annotation (free note) and it went way off the page to the point where it was impossible to find it. I was surprised to find out the the zoom to selected feature doesn't apply to annotations. This idea is to make it so you can zoom to an annotation to figure out where it is in the model.
Today, if we don't have the capability to assemble several components at once. If we want to assemble several components by default constraint, we must do it, one for one. That is very tedious work. It should be allowed to assemble several components by default constraint.
Currently a cosmetic sketch is hidden when behind another component in a 3D assembly displayed as shaded. A view of that same assembly paced on a drawing displayed as shaded will show the cosmetic sketch thru all surfaces. Sketches that are behind other components should be displayed as hidden the same on a drawing as they do on a 3D model. Reference case CS149095 and the views attached.
Scope: Flexible assembly When we define a varied Items Dimension, using Method "Distance", WWE can only select a plane and not request an offset. Workaround is to create an additional offset datum Idea is to integrate the offset to the function - see picture Regards
I was seeing the following video from NX, and I think the selection method, is quite good. https://youtu.be/flLVhBiyD2Q With this selection, is easier to select some geometry in our models.
Creo currently only allows the mirror constraint to vertices in sketch mode. Even if we select some arcs, circles and lines, and select the mirror inside sketch, the mirrored geometry per se, does not have mirror constraints, but instead, it's vertices get applied the symmetric constraint. While this is fine if the new geometry is not edited, ie, trimmed, extended, etc, it's rather annoing and time consuming that whenever we later in the process add fillets, chamfers, or trim and extend geometry, the symmetric constraints on the original vertices get deleted by Creo. There was some improvements with the option to fillet and chamfer, but keeping the original symmetric vertices and split the geometry between solid and construction lines, to avoid the annoying deletion of symmetric constraints whenever a simple fillet was added. Nevertheless, this does not solve all the common problems, whenever we need to trim or extend mirrored geometry. I suggest that the "Symmetric" const
It should be an option, to global interference to stop the analysis, if users want's. I have made a calculation with wrong inputs, and I'm unable to stop it. Know I have 2 options: 1-Wait, and restart the analysis, with correct inputs 2 - Force CREO to shutdown, reopen the projet and do the analysis. Both of them are not that productive, both of them take long time!
In interactive Creo, a user can replace one component with another, even when the replacement is not part of the same family table or interchange group. This is done by enabling the ‘Unrelated Component’ option on the Replace dialog (see attachment replace.jpg). We need the equivalent API support so that the replacement can be automated within a PDM system. If the replacement component is geometrically equivalent to the original, no user intervention should be required, and any constraints should be automatically reconnected.
Tried to weld two parts together. It seems that the geometry is not that simple.With a butt weld it works but if I trie to fill the gap completly when I try to fill the gap completely with a butt weld it does't work like expectedIt's depth is 14mm and it works only when I type in 13.99mm It's possible with this workaround to type in 14mm but you have to define a face offset of -0.01mm that it worksNot so nice for users to find this workaround.Is there a possibility for the programmers to make this easier?
Today, ModelCHECK has the ability to flag over-written drawing dimensions with the DIM_OVERWRITE option. This is a request for a similar capability for solid models. We'd like ModelCHECK to be able to flag driven dimensions on solid models that were manually overwritten. This applies to our drawingless data sets. We have internal rules, training, and practices to avoid this situation, but we'd like an automated way to verify that no overwritten dimensions snuck by.
Sketch Regions are now only available fit external sketches and this wat of working is not available in internal sketches. If available in internal sketches a lot of trimming has not to be done anymore. This maken sketches more stable and working more productive. Also areas may overlap. In that case simple click the areas which have to be extruded without having to create closed loops which do not overlap.
Analysis Features have to be one of the best kept Creo secrets. The ability to create patterns of Analysis Features (Lengths, distances etc.) would be beneficial from a productivity standpoint, even if it's limited to specific use cases such as being able to create a reference pattern from another pattern of features such as points... The most likely candidates would be geometry measures such as distances and lengths. Add in the ability to create repeat region reports (for X, Y, Z point measurements from a common datum coordinate system gets the Dev Team bonus points!!
Can we please get a config option that would automatically assemble the first part in the assembly to the default location?
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space industry. I am the mechanical team lead. Stakeholders are my team.2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.It would be great to have a design critera for minimum thickness. This willl ensure that the part can be produced through AM.4. What is the use case for your organization?For components to our satellites.5. What business value would your suggestion represent for your organization?Mass savings on structural components can reduce launch costs and increase the mass that the satellite payload can have.
1. Describe the ProblemWhen we have complex calculations which need several minutes to be solved or when we want to run them on a calculation server, it will be good to have a batch mode as wehave in Creo SImulate. Example in Creo Simulate: 2. Are you using a workaround?Run the calculation in interactive mode.3. What is the use case for your organization?In our company, we design hydraulic components for hydrostatic transmissions, we democratized CFD's calculation, we have 29 designers using Creo Flow Analysis.4. What impact does this problem currently have on your organization?We have time's losses on CFD's calculations.
1. Describe the Problem When sketching in 2D detailing, lines drawn over a view of 3D model are always below the lines of model. This creates problems. Please provide either: - Creo drawing option to show sketched lines on top yes/no. - "Bring to front" / "Send to back" feature in drawing mode. 2. Are you using a workaround?Workaround is to make sketch line thicker and it will make it visible. But this is not satisfactory. Or we can edit PDF after export and there fix the visibility of certain lines.3. What is the use case for your organization?We highlight sometimes certain parts of view in drawings. Or have to draw something over it.4. What impact does this problem currently have on your organization?Unsatisfactory drawings and waste of time to fix them with workarounds.
1. Describe the Problem Reference: Ticket - 17627996 Article - CS155799 When creating a drawing template, a note can not be 'related to view' when the view is a template view. This should be allowed. We have a requirement that notes be related to views or objects, yet our own templates won't follow that rule. 2. Are you using a workaround?No. The engineer will need to do it on their own later.3. What is the use case for your organization?Engineers create drawings using a template with the notes under a view already related to the view.4. What impact does this problem currently have on your organization?The engineers will be flagged by our checking system that these notes are not related to view. The ENGINEERS will be flagged for a note that they didn't even create. The optics look bad, where the policy is to not have unrelated notes, but the corporate template DOES have unrelated views.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.