Recently active
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea modelcheck MATERIAL_NAME support for subfolders in the material library.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have ModelUpdate reports to be added as an attachment to the CAD Document in WindChill automatically. Preferably, just the last one.
We are using the Automatic Rep since upgrading to Creo 5, particularly when PTC by default hides the pre-Creo 4.0 Geometry and Graphics simplified representation. We are experiencing that components in this Automatic Rep are not visible in the PVZ exported from Creo when the master rep is not in session. It is therefore not possible to open a model in a user defined representation and export to PVZ, when the user defined representation uses Automatic Reps. Consequently, when you open a model only in the Automatic representation available in Creo, not a single component contains any geometry in the PVZ. Again, only when the master rep is not in session. Using the option hide_pre_creo4_reps I could see that parts that where in e.g. geometry rep where actually exported to the PVZ, even if the master rep was not in session, so this effect is only seen on the Automatic rep. Shouldn't an export to PVZ at least use the geometry rep of every visible component in the assembly ?
Following the PTC support tutorial for Modify Size, it is possible to modify the size of a part and as expected, all instances of that same part follow that modification. This modification works for both parts that are reused in AFX or reused via (reference) patterns. This doesn't work for changing the type of a part. The tutorial for Modify Type shows the action for only one part. What we have found so far is that : The type of an AFX profile that is in a (reference) pattern can't be modified. The only workaround seems to be to delete the pattern, modify the type and then re-apply the pattern. Any possible consequence on e.g. simplified representations and drawings such as balloon references, partial view references make this method less than ideal. The type of an AFX profile component that is reused by sing the AFX user interface can be modified on a particular instance of that profile, but this modification will only be applied to that one instance, copied into a new comp
It would be a good thing to have a config option to set the regen type in NC manufacturing so that the session doesn't pause for a user input. This will allow a complete regeneration in Creo NC MFG in a automated NC program generation environment. I would like to set to "Normal" and skip the dialog.
Creo Parametric can export a 3D PDF from a 3D model (part or assembly), but only the default orientation views are available from within the PDF. Please also include any published, user-defined combined model views, along with their attached PMI annotations, so these can be used as part of a technical data package based on the 3D PDF.
In NX, while exporting a 3D PDF-based technical package, you can select from a set of loaded template files. The selection then controls various aspects of the exported 3D PDF, like orientation, scaling, title blocks and other static or dynamic annotations. With Creo there is only support for very basic recipe files that don't appear to handle things like standardized title blocks. Please add support for template files like NX has.
NX allows the use to attach cutting plane symbols to a section view, with various options like arrow direction, text orientation, etc. This helps the user and any reviewers to correlate PMI MetaData in PDM to the 3D geometry rendering, for downstream business process workflows. The attached example shows a cutting plane symbol attached to an offset section view. Please add Creo support for the equivalent capability.
Currently HOLE_DIAMS only allows checking if users are using a standard diameter hole if they are using the 'hole' feature in Creo. However, it's also common to create holes from extrudes. Please expand HOLE_DIAMS to also check for holes created from extrudes.
Several checks in ModelChecks can use external list files (HOLE_DIAMS, etc.). However, ModelCheck lacks a lot of functionality when using external lists: User usually cannot see what are the allowed values in that external list Users cannot pick/update from the allowed values. Please make external lists operate like internal lists where allowed values are shown to users and users can pick from the allowed values.
As per the help center, layouts can be assembled into a Creo Parametric assembly as a component, similar to using a skeleton model. Any 2-D geometry in Creo Layout that is designated as Public becomes curve geometry in the 3-D assembly that can be referenced. It seems like text is not an entity handled when importing layout features into the 3D model. In our company, we would like to create an assembly of a plant (for example) on the layout. This works out better with the text in the assembly for reference. The problem of not having text also shows up when we create drawings-Drawing will have no text to complete the design. Can we get a text in 3D assembly?
The current functionality is that when a repeat region on a bom table is changed from one simplified rep to another, the custom bom balloon symbol is reverted back to the default. This is an issue since: 1 - it shouldn't reset since we use custom balloons and the default creo one is incorrect 2 - what if that table is not using the default balloon symbol that other tables are using 3 - the “default_bom_balloon_type” dtl option does not work if the symbol is not already in the drawing itself. Since we use formats, we can't load symbols into our drawing for the option to work. Thanks!
When a user add a custom Material Creo saves the new material in C:\ProgramData\Creo Flow Analysis\CustomMaterialsDataBase.smat. I need to customize the path of this file and I searched documentation but I couldn't find then I opened a case to ask it : C15618925 The customer support talked about article CS300506 Then I'm asking a config.pro / sup option to customize this file location, like for example: pro_material_dirpro_sheet_met_dirpro_smt_params_dirpro_group_dirhole_parameter_file_pathsketcher_palette_pathpro_note_dirpro_palette_dir pro_symbol_dirsymbol_instance_palette_file etc... Thanks
Two improvements for MBD: 1. Option to Auto center dimension by default. I suggest config option: auto_center_dimension_mbd yes*/no(This option already exist for drawing dimensions: config.pro option auto_center_dimension). 2. Snap lines for dimensions in MBD. This option would be available for dimensions which are positioned on the same plane.(This option already exists on drawings). Regards, Domen
BOUND_INFO currently Checks that no views, entities, dimensions, symbols, notes, and tables lie outside the boundary of a drawing. But GTOLS are not checked. This idea is to include GTOLS as well to check. Not sure why PTC never thought about this or why no users reported or requested this. I submitted a PTC case and was closed asking me to submit a product idea!
An analysis tool in 3d environments would be useful that allows you to generate a table with the coordinates of the points present in the model with respect to a chosen coordinate system.
Per Article CS9099, it is intended functionality that if multiple Creo Parametric windows are already open, a new window is not automatically activated after retrieval of a model from Windchill via the Open in Creo action from the embedded browser. The purpose of this enhancement request is to change this behavior and automatically activate the new window specifically in the scenario of using the Open in Authoring Application option when creating a new CAD object in conjunction with creating a new Part. In this use case, the user typically intends to work on the new model immediately, and it would be optimal to not require manually activating the new window.
User should able to read the Capping Information through Toolkit API
A graphical interface would be useful to act on the program of a model (part or assembly) without having to use a text editor.
Fill command, should be possible to be created without the need to create a sketch. It should be possible to select curves ou edges directly
1. open *.ASM in Creo Session 2. Run "Model Check" 3. Click Error/warning 4. Report Expanded. 5. And again Click Error/warning. 6. Expanded report Should Collapse.
It would be pretty nice to be able to export WEB based HTML versions of our Creo Parametric Files. We currently use E Drawings Professional to do this. It would be nice to not have to use a COMPETITORS software (E Drawings is part of Solidworks) to accomplish this. We use this to allow out customers to view our designs via any web based browser. No plug ins or anything required. Our customers DO NOT want to have to download any other software to see our files. E Drawings does this for us. The can then rotate the models around, and see our current progress of mold designs.
Inserting image in a format like we do in a drawing or layout. Now it is not possible but it would be usefull.
All Tollerance tables (also holes and shaft) automatically add to drawing when we use ISO standard and we have create_drawing_dims_only on yes in cofing.pro.
Could be very usefull a parametric and associative tool to create new and customized font that we can use in sketch to model some text. So we can change every typeface and see automatically the result.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.