Recently active
1. Describe the ProblemCurrently, in the repeat region relations, no drawing parameters or information about the drawing can be references.2. Are you using a workaround?Using parameters stored in the member itself to set flags, rather than automate. Or setting the relations to compare to the string of the drawing number, rather than referencing the drawing number, again, no automation.3. What is the use case for your organization?I need to compare a member parameter to the drawing number to determine sorting and other factors, but that cannot currently be done. It can be done manually, for each drawing, using the workaround, but I want it on the template in a way that works automatically.4. What impact does this problem currently have on your organization?Extra work creating non-parametric data.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announce
Is the "Multi-line Text" tool in Creo Schematics very tedious to use, or is it just my experience?I am trying to place a multi-line note, in the Multi-line Text user interface the note looks as I want it to appear on the field of the drawing. However, when I place the note, it adds spaces between lines. I've tried changing the settings in the Temporary Note Properties GUI, but even those settings are hard to understand what they do. Help please
Creo 10For non spec driven pipes, is there a way to change the color of the center curve after the pipe has been modeled? Where is the control for the curve color?
1:creo12不能检索pro_Library_dir所指定的库中的元件。这是creo12的一个BUG么?因为其它版本的creo是正常的。 2:能不能设置一个选项,可以让功能区按键提示“ALT”被释放出来,用于快捷键比如ALT+1,ALT+F等。功能区按键这个操作太繁琐,按键次数太多并不能起到“快捷”的作用。而且在使用这个功能时因为软件要加载出提示,还会让软件感觉卡顿。再者大多数人并不会用到这个功能,况且还有一个F10可以用来做这个事。为什么ALT与F10两个按键用来做同一个事情呢。还占用ALT这个使用率超高的按键。 建议设置一个选项让用户选择是否使用这个功能,选择不使用这个功能时ALT键可以用来设置快捷键。
I want to make a Bimetal Strip Temperature Displacement for my full mechanical project :mechanical solar tracker (dual-axis sun follower) brief description a purely mechanical solar tracker that uses clockwork and thermal expansion to keep a small solar panel or mirror sun-facing, without any electronics or sensors. working principle heating the bimetallic strip triggers a ratchet mechanism for hourly, incremental platform rotation. gravity then leverages a weighted escapement to fully reset the platform upon sunset.also any advice for my projectsThanks
I am using Creo Parametric Release 9.0 and Datecode9.0.8.0While running edit command, Creo window get freeze and can't change the numbers
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View2. What is the problem?Creo View Clients download link is not visible in the main structure. Bring Clients to the main structure since CV may be used as standalone SW. I want to see it there like CV Adapters and not digging into the WCH PDM structure.3. Are you using a workaround? If yes, please describe it.Have to find it in the download structure.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Optimizing time.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Waste of time during finding files under confusing structure.
1. Describe the Problem During a Creo check-in to Windchill if an item already exists the upload fails with the message "XXXX is not unique". Often this is because a user has downloaded the same vendor STEP file as another user or the user has accidentally assembled CAD from a network drive instead of from the Windchill repository. For our organization, the items that are in Windchill already are exactly the same that a user is trying to check in. There should be an option for "replace with items in Windchill" to make it easier for users to check in the parts without needing to search and add the files to their workspace (remembering to uncheck the "Reuse modified workspace content" box). There should be a drop down option just like there is for the option to remove items from workspace when deleting an item. 2. Are you using a workaround?Yes, searching, adding the items from Windchill to the workspace and remembering to uncheck the "Reuse modified workspace content" box.3. W
Working on a decent sized harness with around 2 dozen connectors and have routed all of it in 3D with coord systems and networks. In the past with smaller harnesses I have been able to manually put in the number of pins in the components tab and then in the pins tab add in the entry port, regenerate the assembly, go back into the parameters and the PIN ID and Cable name have automatically been populated. (Not using Cero schematics anywhere all manually routed) Just as a quick test for this harness I picked a few connectors to make sure everything was working and followed the same process above and the pin ID came in but the cable name did not. My question would be why is the cable name not coming in? My first guess would be that i need to fill out the entry port column for every single connector ( with that then do I need to do that for every port or just one per connector?). My other guess would be I am missing a step somewhere in there and something is not connecting correc
Has this been tested with Creo? Thanks
A user recently got a new computer with Creo 11.0.3.0. They noticed that their "shortcut" to Pro/Library was missing on left hand side of the Creo Browser underneath Common Folders. We looked into their config.pro and saw no issues. The pro_library_dir was even defined as it is on all other users' computers also running Creo 11.0.3.0. I even changed the setting on the config.sup file on their computer and that failed to make the Pro/Library shortcut show up. Has anyone else ran across this issue and what steps would you take to make the shortcut show up?Below is a picture of how it shows on my Creo Browser.
I am using Creo Parametric Release 10.0 and Datecode10.0.7.0I have a user asking about defining a default simplified representation in a non-assembly model, is there a default simplified representation in non-assembly models? I have not been able to find default simplified representations in anything but assembly models.
Hello,I would like to have an assembly file which contains a box and many of a same part. Like a box full of bolts. Is there way to assemble those parts in not a particular manner but rather in a random way? An example picture is shared.Thank you.
I am ready to engrave some words on a surface using extrude function. The code list below, but seems the specified font did not work. I checked the feature created by this function, the font is still font3D. How can I use other font? double height = 10.0;pfcPoint2D_ptr firstCorner = wfcCreatePoint2D(-25.00, -25.00);double length = 48.764;pfcPoint2D_ptr secondCorner = wfcCreatePoint2D(-25.00 + length, -25.00 + height); wfcSectionEntityText_ptr text = wfcSectionEntityText::Create(firstCorner,secondCorner,content); text->SetFontName("cgomg"); // use font cgomgwfcSectionEntity_ptr textEntity = wfcSectionEntity::cast(text); sketch->AddEntity(textEntity); sketch->SetIntentManagerMode(true);sketch->SetIntentManagerMode(false); /* Redefining the feature */extruFeat->RedefineFeature(0, extractedTree, featOpts, regenInstr);
PTC says this can't be done, so I'm appealing to a higher authority. Put simply, I want to use repeat region relations to compare a parameter in each member to the number of the drawing. PTC Tech Support says there isn't any way to reference information about the drawing from within the repeat region, but that sounds like a terrible gap in functionality, is it really true?
PTC community,Is there an auto save option in creo? After a certain time or key strokes. My pro-manufacturing guys were wondering so I thought I'd look into it. I thought maybe a config option.Please help me out.
1. Describe the ProblemWhile replacing components in assemblies Creo evaluates reference pairing by component interfaces, same name, same history, same parameters, and same ID basis. Creo does not compare references based on geometry. This forces users to make thousands of "no brainer" clicks to reattach references in assemblies form which parts have been replaced.2. Are you using a workaround?Manual clicking of all interfaces is often the only way forward. Sometimes one has to do3. What is the use case for your organization?When creating new versions of components that are used in big or multiple assemblies. When replacing components in assemblies having multiple parent assemblies. When remodeling features for better editability or added features.4. What impact does this problem currently have on your organization?Each user may lose approximately 15 minutes per week without this feature.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This actio
1. Describe the ProblemModeled which have been modified using the "Dimension Boundaries" tool in the analysis tab do not show as a feature. It would be good if ModelCHECK reported that a modification has been made in the model using the Dimension Boundaries tool ("Dim Bounds" in the help)2. Are you using a workaround?Not telling users about the feature is the current work-around. May remove the button from the Analysis Tab.3. What is the use case for your organization?Dimension Boundaries could be useful for mass or tolerance analysis.4. What impact does this problem currently have on your organization?Currently if a model is checked in with the modifications active, then the derivative files maintain those changes, this could lead to downstream users or manufacturing building components to the wrong dimensions. Model/Drawing dimensions show .250+/-.050, but the part is modeled to .300 or .200 because Dimension Boundaries has been used.Status changed to: ArchivedHello,We are archivin
1. Describe the ProblemWhen the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model.There should be some visual indication in the model that the dimensions have been altered using the Analysis -> Dimension Boundaries tool (referenced as Dim Bounds in help). An analysis feature in the model tree would be helpful, (This would also be helpful for turning on and off the analysis, or having different analysis scenarios)Also highlighting of the alerted surfaces would also be helpful. One color for more material another for less material. Or, one color for upper boundary, and another for lower boundary.2. Are you using a workaround?Not telling users about the capability.3. What is the use case for your organization?When the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easi
1. Describe the ProblemWhen creating an Excel Analysis, there are two buttons, New, and Load. If you do not have an existing worksheet, the process is:NewIt opens an excel sheetSave (saves as xlsx)CloseLoadChange file type filter from .xls to AllLocate, or realize you have no idea where you saved it and start overIt opens the excel sheetPTC has confirmed that this is the expected behavior. But why are these not one step? If you create a new sheet for use in this new analysis (which doesn't already have one), why isn't it loaded immediately? You'll notice that the results of New and Load are the same, the sheet is open. The only difference is the buttons are not enabled after New, only after Load. It feels redundant and confuses people. The IdeaWhen there's no Excel sheet already loaded, and one is created, load it.While you're at it, fix the default file type filter, which is still .xls2. Are you using a workaround?Am I using a workaround? Just following the confusing roundabout proces
Hello ptc When trying to activate Modeling Express 6.0, to get my 72 hour key I am getting the following error in my browser "Internal server Error code 500". As a side note, I have been having to do the 72 hour key for a couple of years now as I get a Proxy Configuration-Connection Failed error for automatic activation. This has not been a big deal as the 72 hour key is a bit of an annoyance but not that big of a deal. Please see attached screenshots.
Hello,I am a senior year student in university, aiming to implement my previous work experience using Creo Parametric/Schematics to generate electrical wire harnesses for our Formula SAE team. This way we will better know items and wire lengths needed to make our yearly wire harness for competition, both IC and EV. I personally love Creo and hope to help future members learn this program since it's seemingly necessary to work in some high level industries.With only a university free account, trying to prove that Creo is more than useful for our efforts my previous experience is somewhat mitigated for reference. I am hoping to maybe learn of some alternative means to generate the parametric intelligent wire generation. Also is colored cabling disabled for a free account? I've attached an image of my default parameterized spool below, adjusting the name to lowercase as per some support ticket entries I read prior but to no avail. For one person on our team hoping to join a spe
Requested Improvement: There should be some visual indication in the model that the dimensions have been altered using the Analysis -> Dimension Boundaries tool (referenced as Dim Bounds in help). An analysis feature in the model tree would be helpful, (This would also be helpful for turning on and off the analysis, or having different analysis scenarios)Also highlighting of the alerted surfaces would also be helpful. One color for more material another for less material. Or, one color for upper boundary, and another for lower boundary.Environment: Tested in Creo 10.0.8.0. Problem: When the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model. Manufacturing could manufacture to the model expecting the model to match shown dimension values. The end result is that bad parts could be made due
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 7.0.8.02. What is the problem?Mass tolerance is estimated not calculated- Creo mass does not have the ability to show maximum material condition and minimum- ie max mass and min mass. Creo Parametric's dimension boundary tool does not understand that for the mass to be maximum, the external dimensions must be max and the internal dimensions must be min.3. Are you using a workaround? If yes, please describe it.Estimation4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Would allow all parts to have a Max, Min and nominal mass (and also a mid limit mass- ie for machining of non symmetric tolerances)5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)No-one trusts Creo's mass, this is one iss
Currently we have the following relation in our startpartMATERIAL = MATERIAL_PARAM("CONDITION")This arranges that the parameter MATERIAL is filled with value of the material parameter CONDITION. This parameter MATERIAL is shown in the BOM.As with Creo 7 there is the multi-body added. In this situation it is possible to use multiple materials in one part. When this is the case there is a parameter PTC_REPORTED_MATERIAL created which contains the name (I think it's also the condition name) of the used materials separated by a ",", see below. I thought I update the relation in our startpart (template) but it is not possible to use the relationMATERIAL = PTC_REPORTED_MATERIAL It then shows the error "Invalid symbol ' PTC_REPORTED_MATERIAL ' found.". Somebody a solution?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.