Recently active
As autocad. I have many 2D drawings, each drawing is a .DWR file. Is there any tool in the Drawing interface of Creo 12 to quickly combine many drawings into one DWR file? Thanks
1. Describe the Problem The Select Related Tree could use several improvements: External references are not currently displayed. It would be very helpful to be able to select a feature/model and also display the external parents / children, Note: external children might only be possible for the currently open assembly or models in session. When working in assemblies, you first need to activate a part before being able to see Direct Parents / Children which is misleading / confusing for users. It's hard to trust the results if you have to remember to activate first. Or at very least the Creo UI should tell the user "Activate the model for more detailed results". When selecting components in the model tree, it would be very helpful if there could be a summary of external references for the selected component. 2. Are you using a workaround?The current Select Related Tree is not very useful without displaying external references since it only provides a p
1. Describe the ProblemWhen constructing a parametric note or dimension it would be helpful to be able to enter dimensions and parameters using a list or graphical method. The dimension and parameter selections would work exactly the same as the tools already available in the "relations" dialoge box.Suggested location for new parameter and dimension selection option boxes. Example legacy "Select Parameter from List" capability in the relations interface.2. Are you using a workaround?Either the user must know how to manually construct a parameter or, they can open the Relations interface, then use the "Insert Parameter Name from List" function there.3. What is the use case for your organization?Parametric notes can help reduce the chances for error as the design develops. Its really easy to type "4X" for a pattern, but that can change with time. It would be helpful if it was easier to construct parametric notes/dimensions to aid in adoption.4. What impact does this problem currently hav
Hi,Can someone show the method how can i get this space in between dimension line?How to break the dimension line to allow another line go through? CREO VERSION 9.0.6
We use PTC CREO for our engineering system, I am being told that we cannot export drawing to a directory in PDF format in part number order. Is it possible?
Hi everyone, I'm currently working with PTC Creo Web.Link and trying to determine whether it's possible to designate a parameter specifically associated with a FeatureID within an assembly context.I've reviewed the Web.Link documentation and found the method pfcScript.pwlParameterDesignationAdd(), which seems to apply only to general model parameters. However, I haven't found any reference to designating parameters that are tied directly to a FeatureID. Has anyone successfully designated a parameter linked to a specific feature within an assembly using Web.Link? If so, could you share any insights, approaches, or code examples?Any guidance would be greatly appreciated! Thanks in advance!
I am using Creo Parametric Release 7.0 and Datecode7.0.8.0Our team makes models (assemblies to be precise) of chips/substrates that have a rectangular body, an overlay showing bump circles, and hundreds to thousands of solder ball models patterned over the bump circles that were imported from dwg onto the model's surface. The pattern part is currently tricky and involves a lot of file conversions and scripting outside of Creo to make a pattern table that meets the formatting required. I wanted to see if there is a way (or request this feature) to be able to pattern each solder ball over each bump circle by recognizing the pattern of bump circles. I know there is a feature recognition of patterns and ability to write/read that pattern table, but it does not recognize lines, only edges/surfaces of holes. The ability to recognize the edge of an imported circle for this feature recognition functionality would allow us to save multiple steps.
I am using Creo Parametric Release 7.0 and Datecode7.0.8.0I'm working with Creo Parametric 7.0 and preparing a model for FEM meshing in Altair SimLab. I need to divide a surface on the model to isolate a specific region for mesh control. In Creo 9.0, I know there's a "Divide Surface" feature that makes this easy, but it's not available in version 7.0.I’ve tried using the Split Surface tool, but it doesn’t allow me to sketch and limit the division to a specific area. What I need is a way to sketch a region on an existing surface and divide it so that SimLab can recognize it as a separate surface during import.In CATIA, I would use the "Sew Surface" function to achieve this, and SimLab would correctly identify the separated surface. Is there a workaround or alternative method in Creo 7.0 to achieve similar functionality?Any guidance or suggestions would be greatly appreciated.
An option should be added to allow users to change and save the default settings in the PDF Export Settings window. It would be nice to be able to change settings such as "Color" to monochrome instead of color or "Fonts" to stroke all fonts instead of use truetype fonts and have that be the default settings. Currently in Creo 2.0 you have to remake these changes every time you open the software.
Hello, I have a ME10 macro that selects all geometries from a view and returns the pointer and geometry properties as a list to LISP.The pointer corresponds to the return value of the sd-get-annotator-reference function.To continue working with the elements, I need the sel_items for the pointers. But I can't find an inverse function for sd-get-annotator-reference.So far I have implemented this by using get_selection in LISP to get all sel_items and building a new list in which the pointers are added using sd-get-annotator-reference.I then use this list to add the sel_items to the list returned by ME10. However, the last process is quite slow.Does anyone have an idea how to do this efficiently?BR
I want to learn Creo parameter and Relations for 2d drawing. please suggest me best tutorial for that. I am using Creo 10. Thank you.
We would like to have three additional fields added in Creo NC for the tool type “Reaming”: “tip angle”, “tip offset”, and “tip diameter”. "Picture 1 Reaming" Our colleagues in programming would like to control the depth during programming—similar to “Drilling” and “Thread Cutting”—using these additional fields.This would be a considerable relief during programming, as the chamfer/lead-in of the reamer would no longer need to be added to the depth manually. Example for Drilling:"Picture 2 Drilling" Example for Thread Cutting:"Picture 3 Thread cutting"
This topic has not been fixed within the last 25 years so I make another attempt here 😉:When creating a new drawing with the drawing template:You cannot click OK without selecting a 3D model - the button is inactive:There are many use cases where this makes no sense:Import of 2D IGES or DXF data into the drawingA drawing that contains only notes and tablesA user just wants to start a drawing, place the drawing frame but doesn't have the 3D model from his colleague yet.Since using the template is not possible in those scenarios users tend to select "Empty" to activate the OK button. By doing so they don't use our template and therefore don't have any parameters for the drawing frame. This results in Creo asking for a value for every parameter in the drawing frame when you place it thereby overwriting the parameter with simple text making the drawing frame non associative. All because Creo forces you to select a 3D model when creating a drawing from template.Please fix this nuisance onc
Hi Everyone,I'm encountering a challenge while attempting static structural simulations in Creo Simulate using Mid Surface shell idealization with contact definitions.It appears that the contact interactions are being ignored during the solution process, leading to premature termination of the simulation. This issue seems specific to the shell idealization approach.While switching to solid or thin solid idealizations does allow the contacts to be recognized, it significantly increases model complexity and computational time.Has anyone faced a similar issue or found a workaround for this? Any suggestions or insights would be greatly appreciated.Thanks in advance!
I have the same problem with this topic: ModelCHECK does not recognize thickness in flat pa... - PTC Community with Model Check in CREO 12.4.1.0
If we have provision for saving the Hole Table columns after adding necessary parameters, it can be reused. Now we are in need to add Hole table columns and parameters manually each every time. This is time consuming work.
Hello PTC communityI am trying to solve a Topology optimization problem (CREO 10.0.9.0) for a rotating disc, but it is not converging properly. Here is a simplified version of the problem I am trying to solve. 1) starting geometry = full disc2) preserve geometries = Center and exterior portion of the disc3) Axis have a cylindrical support 4) Contact defined between shaft and disc5) Centrifugal force added in the center axis direction criteria below: 6) I tried mass reduction or stiffness and both did not converged correct7) I am defining symmetric distribution around axis and symmetric between central plane😎 material is defined with standard properties This is the result I am getting I tryied, axissymetric model as well (pie slice), it did not work as well.Any suggestions what I am doing wrong or how to set this problem properly?
Hello All, In Creo 7 when saving as a STEP, I was able to select the coordinate system in the window shown in the attachment but in Creo 10 the button stays greyed.Does anybody know why this is ?
Greetings Members As of this week (10/28/25) I am unable to obtain an Activation Key for Express Modeling. It was working fine the previous week. Here is a step by step description of what happens:- Click the CE Direct Express icon on my desktop- Obtain the following dialogue, this is normal or at least has been since direct access to the license server stopped working for me in Nov 2023. Each time I have to reactivate even though I have an account and have been using CE Direct Express for more than 2 years. Nothing has changed - same laptop, Win 10 OS, etc.- I enter my email address and password, select ‘Activate’ to get this dialogue, also normal.- In my case there is no proxy server, I am merely a PC on the internet. My internet connection is fast and reliable. I select the Submit button and obtain this dialogue:- At which point I select ‘Request activation key’. Normally I would receive an activation key in seconds, paste it into the M
If I try to Open Using Default Template for a result set, I immediately get an error message and then a fatal error. However, if I first launch Creo Simulate, and then use Open Result → Default Template, the same results open normally with no issues. P.S. i don't have any Z:\ drive
We are trying to develop a Creo Java Toolkit based application in synch mode (going by the recommendation from PTC) . We would like to use JavaFX for the UI .We see some old articles mentioning the issues related to using JavaFX in Creo Java Toolkit app and like to understand if there are folks who have used it successfully and any guidelines or recommendations to follow to do so.@Florent_Colab @GS_14113977
1. Describe the ProblemOur users prefer to work in Creo in their mother language. This leads to the effect, that the Windchill attribute "PTC_WM_Lifecycle_State" is shown in this local language. But we want to show teh value of this attribute in the drawing always in English language.2. Are you using a workaround?We could use another parameter and create a "translation" operation in 3D relations or drawing program. But this adds possible error possibilities.3. What is the use case for your organization?Our idea is, that there's either a Creo option: E.g. "data_locale" that you can set to define the data locale independent from the application language or there can be a second environment variable next to "lang" e.g. "data_lang" to set the locale there.4. What impact does this problem currently have on your organization?The lifecycle state on our drawing, that should be shown in English language, is shown currently in a different language.Status changed to: ArchivedHello,We are archivin
1. Describe the Problem Company-specific logic added to a UI command using Toolkit function ProCmdBracketFuncAdd can't be removed because there's no corresponding opposite function (as is the case with ProCmdAccessFuncAdd, for example, which has ProCmdAccessFuncRemove as its counterpart).Therefore, you've to resort to a workaround that complicates the program logic of the bracket function. 2. Are you using a workaround?In the bracket function, you've to use conditions to check whether the function should continue to be executed or be aborted.3. What is the use case for your organization?We would like to create a toggle button that allows users to activate (add) and deactivate (remove) a bracket function.4. What impact does this problem currently have on your organization?The absence of a counterpart to ProCmdBracketFuncAdd makes life more difficult for the approximately 10 Toolkit developers in our company.Status changed to: ArchivedHello,We are archiving your idea as part of a general
Hello!I have a frame design. I wish to get the reactions on the 4 points.I have as load the gravitation.The "Y" Reactions are ok. Way I get also reactions on "X" and on "Z"? In case that I have on corner "1" and "4" NO translation and on the corners "2" and "3" translation, by using of load by side, I will not have reaction in the corners "2" and "3". So ...this is the art to determinate the forces, but this is wrong be side load. So ..how to set the constrains correct?Thank you!
I am using Creo Schematics Release 12.0 and Datecode12.0.0.0I need to draw a functional diagram of a refrigeration system.Is Schematics the right PTC tool?Are there libraries dedicated to refrigeration components?Is there a tutorial dedicated to this type of system?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.