Recently active
1. Describe the ProblemProblem - It is not possible to use dual dimensions in hole notesExample - I have a part model with IPS units with a countersunk hole. I make a dual dimension drawing of the IPS part and try to dimension the countersunk hole by showing the hole note generated with the hole feature. This hole note WILL NOT create dual dimensions for the parametric dimensions in the hole note.2. Are you using a workaround?No parametric workaround. The only workaround is to type out the dimensions by hand.3. What is the use case for your organization?This is relevant to every dual dimension drawing that would utilize a hole note.4. What impact does this problem currently have on your organization?Lost productivity. Non-parametric drawings
When saving a copy of Creo models it would be good if there was an option to rename family table instances at the same time. Presently complex workarounds are required when saving a copy of assemblies that contain parts and sub-assemblies with family tables. In the case of assemblies, any lower level family tables are removed in the new files when saving a copy. In the case of saving a copy of parts (like sheetmetal parts) the family table is preserved, however there is no opportunity to rename the instances. In the case of drawings which are automatically copied either the model it refers to will not exist or the drawing will refer to the original model name.So this idea really consists of two parts:Avoid stripping of sub-assembly or part family tables Allow user the option to change the name of the family table members in the Save a Copy dialog box.
1. Describe the ProblemWould like the "View Previous" button as an option to be added to the Graphics Toolbar.2. Are you using a workaround?"View Previous" button can be added to the quick access toolbar, but since it's a view command, it should be co-located with all the other view buttons in the Graphics Toolbar.3. What is the use case for your organization?Daily use when wanting to quickly return to the previous view, especially after taking time to set up a view for a presentation slide snapshot.4. What impact does this problem currently have on your organization?5 minutes per day, per user.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View MCAD 11.12. What is the problem?The SolidEdge direct adapter converts only tesselation info (triangulation data) => some measurements like diameters are not possible, and sections are empties.3. Are you using a workaround? If yes, please describe it.Store on STEP format4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The idea is to convert analytic geometry (like Creo Parametric converter) to have full options.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This is for my customers - today are 5 users.
1. Describe the ProblemIf an active server connection to a Windchill 12 system exists from Creo Parametric and the common name is changed for a newly created part/assembly using the Pro/TOOLKIT function ProMdlCommonnameSet, sometimes the "Replace in Session" dialog appears (even if the part/assembly doesn't have been uploaded or checked-in into the Windchill common space).This behavior is unwanted from within our TOOLKIT application and it would be very helpful if there would be an option to automatically confirm this window (e.g. config-option) or would have a possibility (something like a notification) on which we can listen on, when the window occurs and do a auto-confirmation by a programmatic selection with "yes" or "no".2. Are you using a workaround?No workaround available. Possible workaround: Do not work with the common-name but with an user-defined parameter (consequences: Adaption of several Pro/TOOLKIT applications, CREO detail symbols that are used on drawings, adaptio
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.0 -11.1 2. What is the problem?Creating exploded views in Creo Illustrate is currently a manual and time-consuming process. Although it's referred to as "Smart Explode," a lot of manual effort is still required to resolve interferences between exploded items.We need to carefully select parts so that those exploding in the X direction are handled first, followed by those in the Y and Z directions. If we use the coupling option, all items are grouped together and moved in a single direction, leaving no control over interferences between parts.This step alone accounts for roughly 60% of the total effort involved in producing technical illustrations. For every assembly, illustrators must manually drag and align parts, which not only consumes time but also causes delays.This manual process:Increases illustration costs and time.Limits scalability as pr
When placing a new view of a model on a drawing, if that model has any set datums, those planes and tags are automatically shown in the view, and the drafter must then select and Erase unwanted ones. On a large model with possibly hundreds of planes distributed among its components and subassemblies, this erasure can be time consuming. The only workaround is to use layers with collection filters for "Shown Datum" (see https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS131258), but logistics or standards may prevent this from being a practical workaround.Possible solutions:Allow placement of the view with no set datums visible, then show/erase them the same as every other detail item within the Show Model Annotations dialog box (change existing functionality and consolidate behavior in a single dialog box)Allow placement of the view with set datums automatically Erased, and let the drafter Unerase the ones they require in a given view (reverse of current behavior).Create a config.pr
1. Describe the ProblemProToolkit API missing to retrieve linear and angular dimension Display option. In interactive Creo, there is an Display options dialog box. It can change the display value orientation as such. Also for angular dimension, there are extra settings via following dialog box. I have contacted Support, and support confirmed the no API is available to get these options.Please add API. 2. Are you using a workaround?No3. What is the use case for your organization?We develop 3rd party application, and we cannot orient those dimension correctly.4. What impact does this problem currently have on your organization?This is considered as our application bugs.
1. Describe the Problem Per PTC Article CS148908, it's not possible to use Creo Toolkit to get the "out of date" date status of an object in a Windchill workspace. Please add this functionality. I was trying create a Toolkit button to address lack of Windchill status for 2D drawings as described in this product idea: https://community.ptc.com/t5/Creo-Parametric-Ideas/Windchill-Status-and-Windchill-Actions-for-Creo-Drawings/idi-p/1011563. 2. Are you using a workaround?For 2D drawings in Creo 10, users have to manually check their workspace for this information which can take 30 seconds or more if there's a lot of objects in the workspace. Users often forget to check.3. What is the use case for your organization?Allow Toolkit to know if objects are out of date to inform users that objects are out of date.4. What impact does this problem currently have on your organization?Users looking at out of date drawings without realizing it. Extra time or manual effort to see if 2D draw
1. Describe the Problem We would like the ability to view ECAD Contact Data for INTERAL PCB layers 2. Are you using a workaround?Using Creo View ECAD, but in 2D. There is no 3D solution3. What is the use case for your organization?Reviewing the internal layer design in a 3d method, within Creo. 4. What impact does this problem currently have on your organization?Unable to review the PCB design effectively by the ME.
1. Describe the Problem We were attempting to model cardboard boxes using the Sheetmetal module and ran into some problems. One of the problems is that cardboard behaves differently, especially with bends, than Sheetmetal. We started researching online and found the below video. We have confirmed from our reseller that a lot of the functionality does not exist in Creo. It would be nice if it did so that we can use this functionality to design packaging better. https://www.youtube.com/watch?v=WiDxNaOvF2g 2. Are you using a workaround?No3. What is the use case for your organization?We are trying to take our packaging to the next level and hoped that we could leverage creo to do so. But it seems like we are limited.4. What impact does this problem currently have on your organization?We won't be able to model or analyze packaging as other software/competitors can do.
1. Describe the Problem In Creo 8 they removed a config that let users undock the model tree to put on another screen. This was useful for trees with many columns while doing routed systems. enable_tree_indep Setup whether tree customization will allow separating the tree window from Creo window I would like to see the option put back into Creo. The config is hidden now. 2. Are you using a workaround?Creo 73. What is the use case for your organization?When using applications like routed system that you need to have the model three in full view, for it takes up too much space. 4. What impact does this problem currently have on your organization?Can’t see the model fully. Have to keep horizontally scrolling.
1. Describe the ProblemI am trying to read the Tolerance Value for ISO Standard Hole/Shaft which is internally picked from CoomonFile/Tol_table/*.ttl files2. Are you using a workaround?I have to manually read those files3. What is the use case for your organization?I need to read those tolerance value so that i can set it in the JT File for my application4. What impact does this problem currently have on your organization?Its a high impact issue, as currently i am getting rounded value for those tolerance which is incorrect.
1. Describe the ProblemMissing Insert here function for holesets inside a drilling operation.new sets can only inserted at the end. No possibility to insert a new set between two existing sets.There should be the green "Insert Here arrow" like in trajectory milling.2. Are you using a workaround?no3. What is the use case for your organization?_4. What impact does this problem currently have on your organization?low
1. Describe the ProblemCannot create an internal embedded "Drive Tool Sketch" in Trajectory Milling like in Custom Trajectory Milling, which is automatically invisible an belonging to the NC-Sequence.There should be an option that you can choose between "sketch" an "Drive Tool Sketch" if you create it on the fly.2. Are you using a workaround?no3. What is the use case for your organization?_4. What impact does this problem currently have on your organization?low
1. Describe the ProblemThe Creo Bill of Materials Report should provide the option to generate the report in a common structured indented BOM format. Something that can easily be used as the basis for program planning and tracking. The current "breakdown" format isn't directly useful. And the "summary" isn't structured.2. Are you using a workaround?There are various conversations in the community. Some workarounds include the following. +Make an empty drawing and create a repeat region with indentation turned on (Cumbersome) +Use the Structure tab for the assembly object in Windchill (Doesn't work with embedded parts) +Modify the model tree to only show components, then save the tree report (this takes a lot of manual manipulation on the exported data)3. What is the use case for your organization?I need to generate some preliminary plans based on the CAD model, an indented BOM is a good way for tracking items in the design. I want to quickly generate an in
What product and version are you running?Creo View 11 and Creo Parametric 11 2. What is the problem? Creo Parametric 11 supports the creation of simple tables in Model-Based Definition (MBD), but currently Creo View does not support the display of these tables in a pvz file published by Creo Parametric. See article CS420247: “Unable to view Table Annotation features in .pvz file when viewing the created pvz in Creo View” https://www.ptc.com/en/support/article/CS420247 3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. This improvement would benefit all companies that include information in 3D tables (MBD Tables), as they will be able to display it via Creo View.Take this example of a table in Creo Parametric 11: A user without Creo Parametric should be able to access the information in Creo View, just like with 3D dime
Please include detailed documentation such as screenshots, images or video. 1. What version of the software are you running?CREO 10.0.0.02. What is the problem?Setting accuracy is not allowed for Motion Skeletons ,ASM files3. Are you using a workaround? If yes, please describe it.None, Accuracy value is inherited from the template (I hope, but I'm not sure because I don't know how to verify it)4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We are interested in introducing the use of motion skeleton; for instance we 'd like to use mechanism motion skeleton to: Perform a cam synthesisMake a PID controller setupRead external data into a servomotor composed by numbers with many figures (and you need the motion skel reads them)…5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)If you change only mechanism
1. Describe the Problem Reference ticket: C17764455 Creo has a powerful way to view ECAD Context data for a PCB (Example: https://www.youtube.com/watch?v=Twy8RkGtcSY). However, you can't see this information at higher level assemblies! You would have to open the assembly itself to see all of this data. Why? There is some great information that is needed at higher level assemblies. For instance, there may be parts that touch the PCB and you wouldn't notice that routes are shorting by touching a part unless you could see them at the higher level assembly! 2. Are you using a workaround?No.3. What is the use case for your organization?Having our engineers review the ECAD Context Data at the product level to ensure no issues with how the data interfaces with the higher level assembly.4. What impact does this problem currently have on your organization?It has a big impact as our engineers need to visualize some of this data before they can accurately approve the PCB design for production.
1. Describe the Problem It is a well known problem about the 31 character limit for Creo file names. When importing files with assembly and part names lager than 31 characters, the names are truncated to the first 31 characters. However, naming conventions for longer file names near 80 characters often include more specific details like part number or hand within the truncated text. This makes identification of parts by name impossible. This is particularly problematic in large assembly imports. This feature suggestion should not involve resizing of any data types in Creo. What is needed is the option to automatically create a string parameter like "Imported Name" for each part/assembly name in an import file that captures the name up to the string parameter limit (80 char) or beyond. Then, showing the parameter column resolves the identification issue at least up to 80 characters. This could even be extended to place additional characters in another parameter like "Imported_Nam
Many times a parameter is created for the purpose of it being a variable data field. This data field can often drive relations and purposefully change the model. A full access parameter is created with this intent. A user can easily change it's value by accessing parameters and typing in a value, then regenerating the model to obtain the deired effect. A model template is a good use of this feature. However, the user can make a typographical error in this entry field. If there are many parameters to revise, the chance for error becomes more likely. In order to semi-automate the process of changing several parameters at once, and reduce the likelihood of errors in data entry, it is desireable to be able to read the values from an XML file an replace the existing parameter values. However, when this is attempted via Parameters>File>Import Data>in *.xml format, the existing parameters are unchanged and Creo creates new parameters instead. This makes the
1. Describe the ProblemWorking on large assys, it would be nice to open a top level assembly with only items that are currently in session. Many times it's to check the fit of a particular set of items. I would like this to be an automatic option like MASTER REP. If there are no other files in session when this is chosen it comes up empty. Then you can build a rep from it thru the model tree. 2. Are you using a workaround?No workaround for this idea yet.3. What is the use case for your organization?it would allow us to open a couple of sub assys or parts in windows then open the large scale assy showing only those items we have in session. It could save hours of retrieval time.4. What impact does this problem currently have on your organization?People working on components of large assemblies. This can also help create new Simp reps fairly quickly
1. Describe the ProblemWhen opening the assembly in the creo session, there is no option to copy the selected object's name or number.Note:- Currently, ctrl+c is used to copy the object number and can paste it only in Notepad, not with any other applications.2. Are you using a workaround?Currently, ctrl+c is used to copy the object number and can paste it only in Notepad, not with any other applications.3. What is the use case for your organization?Each time we need to ctrl+c and paste in Notepad from Note pad we need to copy the object number and paste it into other systems. We have multiple systems to work.4. What impact does this problem currently have on your organization?When we work with multiple systems it is very hard to copy the object number from Creo . Find the attached image for your reference.
1. Describe the Problem1. Currently "Auto Move" option is available in Windchill to transfer the object ownership from others. The Expectation is need "Auto Move" Option in the Creo Parametric.When the user right-clicks on the *.ASM or *.PRT in Creo Parametric, the "Auto Move" option must shown.The user can use the option and transfer the object ownership. it will save a lot of time for users. Find attached image.2. Are you using a workaround?Currently, we are going back to Windchill to do this.3. What is the use case for your organization?In our organization more than 300 Windchill and Creo users.4. What impact does this problem currently have on your organization?They feel this will reduce a lot of time, and will increase productivity.
1. Describe the ProblemCurrent behavior:Create a drawing and assign a drawing format that has tables (or use an existing drawing)Close and remove the drawing from the Creo sessionChange the tables on the format and revise the formatRetrieve the drawing from step 1 againFrame geometry is updated, tables are not updated2. Are you using a workaround?Yes (see also CS174296): - In Layout > Document > Sheet Setup - Click the drop-down list and select another format, OK, Remove All - The select original format again, OK, Remove All3. What is the use case for your organization?We changed all our default drawing formats used for all drawings and also changed texts in tables in these formats. It's more effort and it's not straightforward to apply some additional steps to upgrade the format in each drawing.4. What impact does this problem currently have on your organization?For 1500 users there is a possible lost of 100hours/year; possible quality issues; misunderstanding/distraction becaus
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.