Recently active
When sketching in the model, it may be prudent to color the sketch to better reflect real-life scenarios. However, when in the drawing module, the colors remain. This can cause am issue where there are multiple colors on the screen and some of them are contrasting poorly with the background. This can make it hard to work. It would be great to have the color of the sketches match the color of the geometry lines (black on white, white on black... etc).
We would like to search for:Whether an item is embedded, grouped, patterned, etcComponents that are GenericDimensions that are Lock/Strong/Weak inside a sketchDimension that is an angle vs regular
A cross-hatch profile in a drw will not map to a component that is replaced with another family table instance in an assembly. The profile will reset. This can cause issues by releasing a drawing that has the wrong x-hatch.Response from PTC:When a component is replaced with one of its family table instance, the ID of that component in the drawing will also change. As a result, the hatch profile property association cannot be maintained. As a result, the hatch pattern will be reset for the new component. This functionality is working as per current product specification.If references are mapped during the replace, so should the cross-hatch. I almost didn't catch that the X-hatch practically disappeared on me!
When creating a Counterbored Through Hole using the Machining module, it should be made possible to set a different standard value than H13 (click on "Show T&Q" to see this) for the Diameter Tolerance. This could be managed for example by introducing a suitable setting in the ma_customize file.
Could you add an additional enhancement in the config.pro options to customize this behavior?Currently the option to use the double click behavior involves:- Driving dimensions automatically go to value edit- All other dimensions will display the dialog box.So is it possible to turn the customize double click behavior to turn edit on or off.In other words when double click on model dimension we should be able to see dimension property box not edit.
one of the first things I always do when working in a new Modeling environment is creating a toolbar and adding some drawlist commands.it would be much easier if there was e default drawlist toolbar that just should be activated.(adding them to the ribbon 'Utilities' group would be helpfull as well.)
We would like to see the ability to export and import PCB data in the format IDX and not only IDF.
Problem with using 3D contact in MDO is that by selection surface Creo wont take into acount holes or surface conture.It will basily make rectangular surface over it that extends to edges. Breaking that surface into more wont help if surface is not with perpedicular edges and would waste time anyway.Make surface selecting take into acount entire surface conture and holes.
Add the ability to change a dimension name or add a relation directly upon double clicking a dimension.To change the name:Double click the dimension to activate dimension edit. To assign a name directly prefix any name with &. For example d1 can be changed to LENGTH by typing &LENGTHTo add relations:I believe this has also been covered here http://communities.ptc.com/ideas/1018I agree with the implementation of typing = preceding simple relation input. By typing = can also allow for the selection of other dimensions for use in the relation. In the same way you can do this within cells in most spreadsheet applications.This will greatly speed up the creation of model intent and lead to reduced design costs. Another benefit would be the tendency to use relations more due to their ease of use, creating more robust models throughout the Creo community.
When a shown dimension (added to a drawing view using Show Model Annotations) is dragged to the opposite side of the part geometry in the view, the witness lines are displayed as though they remain attached to the original points on the part geometry and there will be no gaps between them and the part. However, when dragging a dimension that was created using the Dimension command, the dimension witness lines are displayed with the correct gaps in the new location. Change the behavior of the shown dimension to be the same as that of the created dimension so that the gaps are correctly displayed once the dimension is place in its new location.
Flatten Quilt is a powerful function of Creo parametric 3.0 . Some users need to add this function in the Creo E/D.It can unfold some Irregular Bend areas (like FPC) that don’t need K-factor.Not acceptable for engineers to create fillet for all bent areas. Quilt surfaces need to be unfolded when the model is unfolded.like this picture
When assembling components, the default should be coincident. The Offset box is greyed out. allow an offset to be typed in this box to change the constraint to distance. This will eliminate having to select the down arrow and then distance.
In Drafting you can share parts, after importing such a drawing in annotation you get separated sketches and loos the share-possiblities. It would be helpful to share sketches also in annotation.
To be able to pattern a section while in sketcher and be able to have a quick preview of the final pattern .
Hallo, Die Symbole eines Creo Schematics Planes (Stromlauf, Verdrahtung, B&D etc.) verfügen über einen Bezugpunkt. Wenn ein Symbol auf einem Blatt platziert werden soll, wird dieses Symbol mit der Maus an diesem Bezugpunkt festgehalten bis es mit der linken Maustaste platziert wird. In den Eigenschaften des platzierten Symbols sind die Koordinaten des Bezugspunktes zu finden. Diese Koordinaten geben die Position des Symbols auf dem Blatt an. Derzeit ist es nicht möglich, die Koordinaten über einen Befehl oder einen Parameter in einen Bericht zu schreiben. Für die Auswertung des Schaltplanes wäre es sinnvoll, wenn die Koordinaten des Bezugpunktes eines Symbols in einen Bericht geschrieben werden können. Dies kann für die Orientierung auf großen Plänen und Blättern von erheblichen Vorteil sein. Zudem kann eine automatische Nummerierung der Symbole in Abhängigkeit ihrer Lage auf dem Blatt erfolgen oder es kann eine automatische Platzierung bzw. Ausrichtung der Sym
At present it is not possible to import a Parasolid file in Modeling that was created in SolidWorks 2015. Any attempt to do so results in the message "Source system is not correct".It should be made possible to import a Parasolid file in Modeling that was created in SolidWorks 2015.
After showing a hole annotation in a drawing, we always need to switch the leader type of a note by RMB "Toggle Leader Type". Drawing set up file or config.pro should define the default leader type.
Our company would like to avoid automatic dimenstion and constrain in sketcher. So, we would like to understand which elements or sketch is not full dimention and constrain. In the sketcher, element color should change after add dimenstion and constrain. For the model tree, sketch icon should change color or some mark. This is implemented in Solid Edge.
Currently assembly's Hide/Unhide status does not affect child component's status. I would like to change it from the parent assembly even when there is a mix of current statuses of the components. I think this behavior is not good for all Creo users. So, it is good to switch by config.pro.
I would like to set Hide/Unhide the features (or components) even when there is a mix of current statuses. This allows us to select features (or comportments) by using SHIFT key from the model tree. This is implemented in Solid Edge.
When the X&Y spacing of a draft grid is small (e.g. 2mm), it is necessary to zoom to see the grid. I would like to see the rough grid (ex. 10mm) even when refitting the sheet. This is only for display. Snap should always follow the X&Y spacing. This is implemented in Solid Edge.
Export all the dimensions drawn on a sheet to Excel, text file
When dealing with parts that move in an assembly, it is often helpful to know exactly what the swept volume of the moving parts is to ensure that there is no interference with other parts that move. The current process is to tediously move the moving parts step-by-step and do an interference check at each step. Instead, we'd like the abilty to specify a part or assembly plus a distance/direction or axis/angle and have that part or assembly be moved along the specified transformation to create a "swept volume" for the part/assembly. That swept volume could then be used to visualize the path of the part/assembly and used to check interference between the part/assembly as it moves compared to the stationary parts.
The BREAK key does not always work. Neither does the 'sdkill' command. Would like a reliable, easy-to-use, supported way to halt a command that is taking too long.
When creating 2D geometry, would like the ability to enter an angle relative to an existing snapped line. For example, if when drawing a line it snaps to be parallel to an existing line, type a shortcut (like "R") then enter a value, the angle of the line being created will be entered as the angle of the snapped parallel line plus the entered value.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.