Recently active
You can set the file_open_default_view config option to show List or Details as default but not thumbnails.It would be good to have this added.
In Creo Parametric DRAWINGs: please add the option to exclude Construction Points (drawn within DRAWING mode) during print or PDF export. Adding the option to include/exclude all types of construction geometry from prints/exports should also be considered, if not already available. I precisely position text by attaching On Item Notes (Annotate>Note>) to pre-located construction points (Drawing>Sketch>Point). Changing note positions exactly is also easier: just translate the attached construction point. Attempting to move notes directly often results in shifting them inadvertently when trying to select the notes. Currently, I have to delete all the points to stop them from appearing in the prints / exports.
When TTFs are used in a Creo Parametric DRAWING, the filesize for the drawing inflates tremendously.For example, in a drawing FORMAT (.frm; single sheet, no views) I drew, when using PTC’s own “filled font” for all the text (general notes, headings, etc), the filesize was 124 KB. Just by selecting all the text and changing the font to Arial TTF made the filesize jump to almost 3 MB!We should not have to live with large drawing filesizes just because TTFs are used in a drawing.
When creating a Creo model most models are created at nominal dimensions and then tolerances are applied as defaults or explicitly. Given the linear tolerances that are applied it should be simple to have Creo step to a "state" where the dimensions go to a limit of the tolerance and then regenerate the model.
It would be benificial to have the option to specify the number where the location set should start at by entering just a number value. example: starting system should start at 100 and then go 101, 102 wiper system should start at 200 and then go 201, 202 Engine compartment should start at 500 and then go 501, 502
For TEXT Notes in DRAWING: "Box" currently affects the line spacing. This makes sentences look uneven when "Box" is partially applied in a multi-line text box.Please add the option for "Box" not to affect the Line spacing. Perhaps the enclosed text can be made slightly smaller so that the box maintains the same height as the rest of the text. Also, please add more shape options to enclose text with. Eg: circle, oval, capsule (box with sides fully rounded, used for dimension numbering/IDs), triangle (used as rev triangles highlighting where changes were made in a new revision of a drawing), flag, polygon, etc.If possible, the outline color and thickness, with and without fill colors (or color gradient), should be customizable as well.Moreover, text formatting options should be added to PART mode SKETCH as well.
For TEXT Notes in DRAWING: "Superscript" & "Subscript" currently affect the line spacing. This makes sentences look uneven in a multi-line text box.Furthermore, "Superscript" & "Subscript" seems to only lift and depress, respectively, the position of the text; it does NOT make the text a smaller size.Line spacing should NOT be affected and "Superscript" & "Subscript" text should be smaller than the main text.Moreover, formatting options for "Superscript", "Subscript" should be added to PART mode SKETCHER Text.
The first sheet of a DRAWING usually has a long string of notes on one side to describe various specifications and conditions for a part and the standards used in the drawing. Currently, paragraph formatting and numbering is done manually.For these notes, it would be very helpful if more advanced word processing capabilities were built into the text editor; in particular: Bullets & Numbering and Paragraph Indents.Besides having different bullet shapes and numbering types, within the SAME text box/multi-line text:a. bullet types and numbering should be changeable partway,b. numbering should be resettable partway,c. indents, bullets/numbering toggled on and off,d. indent spacing and amount of indents should be changeable partway.example start>Notes:1. numbering type 1, sequence 12. numbering type 1, sequence 1 i. numbering type 2, sequence 2 &nbs
For Creo Parametric part SKETCH and all drawing Annotations & Dimensions, I suggest adding the option to specify Font height in "pt" form (eg: 12 pt, 20 pt, etc), just like in MS Office, not just as height in mm or inches.
The UI, formatting options and terms used in TEXT dialogue box in Creo Parametric SKETCH mode and the TEXT STYLE dialogue box in DRAWING mode should be standardized. For example, ASPECT RATIO in Sketcher and WIDTH FACTOR in Drawing should be the same thing. However, when using True Type Fonts (TTFs), WIDTH FACTOR cannot be changed and is blocked out from use (ASPECT RATIO still works in Sketcher). Moreover, if you superimpose the outlined TTF text created in a PART sketch over the filled TTF text created in DRAWING, you will see that there is a mismatch in the letter widths and spacing, even though the text content and text style was set to be the same. Ultimately, the text drawn out by Creo Parametric should be in the same shape, proportion and spacing as all other software (eg: MS Office, Adobe Illustrator, etc) for all TTFs for the same text style. This standardization will allow the accurate modelling of product text labels in Creo Parametric sketches to precisely evaluate artwork
The Multi-Positioning command of Configurations is always per default on "All Moved Objects", and forgets its last setting.A persistent-data setting would be very useful
Highlighting/selecting a component in the window should highlight/select not only the component in the tree but also its parents all the way to the first level in the tree, regardless of whether the tree is expanded or not.
When we do rendering presentation u need change transparency part by part !
When we do intance selective you can specify the context but after that you can't localise that !
Please refer to https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=12242293Currently File > Open interprets Pro/Library as a local folder and not as a Windchill library and therefore does not fetch any Windchill custom views.The suggested improvement is for the Pro/Library shortcut to recognize the Windchill Library and make customized views available in Creo. (I.e. similar functionality to browsing to the Windchill Library via Windchill Cabinets.) This would allow the Creo users to access customized views which facilitate the search for standard components (e.g. nuts, bolts, washers etc) in the library.Please vote for this idea even if you have no idea what I'm talking about!
There is a component missing in the HASCO catalog. It is the "Angled pillar Z 010".Find this component at: http://www.hasco.com/gb/content/view/full/17609
For simplify part you can do that if inseparable inner structure ( inseparable it's bad function not really good study ) .
For module advanced design and the relation for more clearly on the relation structure maybe it's really interesting do link between relation assembly . For example if we want use relation of moving of cylinder in the other assembly juste create link for use the relation system of this cylinder and not create a new time that !
Same fonction chain dimension but for angle !
Improve the selectability of items in a group. If I want to hide, or expode items in a group, i currently have to open the group, and select each item individually. Make is so I can select the group, and all parts in that group get selected.(Current;ly, at least to me, groups only serve to clear up the assembly tree)
In Creo parametric, edge preparation is located "inside" the Flange or Flat-KE.This results in Problems for edge- and corner-preparations that depend on both Flanges.... and most of them I do are depending on both flanges!For excample, you will not be able to build a closed edge (like Picture) using two separate Flange-KE with adequate workYou will have to reduce the base by (bend radius + thickness), add two flange-KE and then extend each of them to meet at the corner. Repeat this if you have multi-bend-flange-KE.So, now... Whatif I change the sheets thickness?you will have to overwork each single KEsorry for mentioning an other CAD-System, but using HiCAD it is more comfortable, there are separate functions for creating edges like this (independent how the flange was created before)My Idea:provide separate functions for "edge preparation" (e.g. closed edge with/without gap or overlapping) and trimming flanges together (e.g. mitre with/without gap)
It would be convenient to have a toggle button which would allow you to toggle between the 3-point and tangent arc.In most cases it is not a problem as there is only one entity that a line can be tangent to, so creating the desired type is easy.However, in some cases, there are more than 1 entity which an arc can be tangent too, so it is not very clear which segmet Creo will use for the tangent condition by default, and that can lead to the designer taking a bit longer to complete arc. For example, when creating a slot section you might start with a rectangle, and then create the arcs at the ends, and finally trim off the two sides of the rectangle on the inside of the slot. When creating the arcs, Creo could possibly revert to the tangent type in the undesired direction, as there are two entities which it can be tangent to, and then 3 clicks are needed to place arc..If there is a toggle button, it could be tangent to both line entities depending on which direction you move into OR you
The cell "Color" is not visible.It is almost impossible for a new user to know that the color should be published in the invisible "frame"
Zur Info! Fehler beim STEP-Import. PTC-Produkte schneiden oft einfach schlechter ab! Es ist nicht das erste Mal, dass mir dies auffällt. Der CAD Benutzer soll und will sich nicht um verschiedene Import-Einstellungen kümmern. Was zählt ist das Resultat. STEP-Datei einfach mittels Drag&Drop ins Programm reinziehen. Siehe folgende Bilder!
The Ribbon is already taking so much screen space that there is totally no added valueto have commands not in the ribbon and loose time to find them via the 'search'
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.