Recently active
Hallo,I have a problem with my simulation......no matter what material I use for my simulation the result remains the same. I may have a bad configuration of CREO... someone has already had this problem an can help me?thanks a lot
Expect to obtain the Creo Elements / Direct Modeling configurations of the subassemblies in the Preset Explode of Creo View Description:In the help you can read that "You can use the Preset Explode function only if the source data has top-level explode states defined". This is the structure on Creo Elements / Direct Modeling. The objects are stored in Windchill.The visualization of Sub-Assy1 is a monlith visualization and the visualization of the Top-Level-Assembly /Tops-Assy is a strutcure visualization. Only the Modeling configruation off the Top-Level-Assembly is available in Creo View in the Preset Explode We also expect to obtain the modeling configurations of the subassemblies in the Preset Explode of Creo View
For instance, I've tried the merge function and that seems pretty close to the functionality I'm looking for in regard to sharing geometry between parts (Some limitations of course). In practice I'm looking to create a forging model/drawing, which needs to be referenced by a rough-out/inlay level drawing, which will be referenced by a final machining drawing. In Inventor for example you can very easily derive a component into a brand new file and the first feature you see in the browser of the new file is that referenced part. You can control whether to break the link (as if you wanted to use that geometry as just a template) or maintain the relationship as the design intent would be to have any changes propagate up the chain to all parts making the reference. At any rate, the merge is the first way I see possible to conduct this design intent and wanted to ask the forum in case there is a much better way in CREO. My mind next goes to family tables in regard to feature suppression. whi
I am working on an assembly of a launching mechanism. Within this assembly I have created an assembly for the launch housing, an assembly for the locking mechanism and a parent assembly they both reside in with a series of parts and springs. In the parent assembly I have constrained the feature that is being pulled and locked into place with 2 constraint sets. "latched" and "unlatched" with the same series of constraints placed on the lock assembly. Within this parent assembly I have created a family table showing the instances of the assembly in both the "latched" and "unlatched" position, also within the lock assembly I have created a family table with similar instances in both the "latched" and "unlatched" position. The issue arises when I attempt to attach the locking assembly parameters within the parent assembly. Upon adding a table column and defining the addition using the parameter stipulation I select the locking assembly and it does not show a parameter to insert.
Following is a frequent use case for me:An assembly is opened in Creo View from Windchill. The assembly contains various annotation sets. Now the assembly is saved from Creo View to the local hard drive as a PVZ file. In this process, all annotation sets are lost. Is there any way to save the PVZ file locally including the existing annotation sets?
Hello , can we automation line Break option in Creo drawing so that we dont have to do it one by one and there are lot of such dimensions in drawing which are overlapping. If there is a mechanism which can detect overlapping dimensions and provide line beak can save lot of time in drawing
Creo 5:Anyone else having to wait 20+ seconds for the Creo's Appearance's menu to open at times? What can i do to speed it up?
I have a ModelCHECK use case where some parameters may or may not exist. I have discovered that if I only list the name of the parameter, then ModelCHECK will not report the parameter as "extra". But if I add extra requirements to the parameter in the .mcs file then ModelCHECK considers the parameter as "required." I would prefer to continue to check for "extra parameters" as defined in the conditions file. Can I define the con which is. "If the parameter exists then it must be a string" In this case "the parameter may exist"PRT_PARAMETER NOTE In this case "the parameter is required and must be a string"PRT_PARAMETER NOTE STR
I am trying to export an exploded view out of Creo Parametric 7.0 into Creo View format but for whatever reason it will not create the exploded state. I have tried doing the export from Creo Parametric when the model is in both the exploded and unexploded states and I have tried opening the model with both Creo View Lite 4.1 and Creo View Standard (I believe it was 4.0). No matter what I try the model I see in Creo View is always the unexploded state and the "Preset Explode" button is greyed out. Does anyone know what the issue might be and why I can't get the export to work?
We have new designer onboard soon. IT is planning to buy DELL precision 5570, with video card NVIDIA® RTX™ A2000, 8 GB GDDR6. This computer and video card are not listed in the PTC hardware list for Creo 5.0. Is this computer will be good for Creo 5.0? What driver version need to be for Creo 5?
Hello, is there a way to specifically search for elements without children and list them all up? This would really help with cleaning up the part. It would probably be best to delete unused elements right away, but in reality that's not going to work all the time. Regards, Patrick
We upgraded to Creo9 last week and now I can't control the layers per view anymore.It's the whole drawing all the time even when I select a given view the layer status changes for the whole drawing. This is the first time I can remember seeing this. Does anyone have an answer for this?
Hi, in feature modeling, section sketch, double clicking on a dimension to modify its value doesn't work any more.This happens since I installed Creo Parametric 9.0.3. on Windows.Thank you for your help.Giovanni
Hello dear members, Is there a way that Fasteners assembly doent show up in BOM but its members are shown with correct qty?Let me give an example, suppose 1234 is a Fasteners assembly consist of a bolt+ Nut+ 2Washers. Now I am bringing this assembly into another assembly lets say 5678. In 5678, I am patterning the 1234(assembly) three times, will it be possible in 5678 BOM to show 3bolt+3nut+6washers as individual lines with correct qty, but not to show 1234 fasteners assembly in BOM line of 5678. Thanks.
Is there way to control the representation in the family table? or Any way to control the subassembly in the top level assembly ? refer the attached image i want to swap the instance of 020008946_Generic at top level MB000A014 thru top level family table. pls suggest. Suggest an alternate way if the above listed options don't exists in Creo.
Greetings In the classic interfaces mouse + tablet (-pelook 1), you can paste a "text" that is in the Windows clipboard by pressing the middle mouse button/wheel in the text line or in the Me10 editor.Is there another way to do this pasting? Reason: We (still) use the tablet, there this is particularly awkward. That means after you have selected and copied the text and are back in ME10, select the desired action with the pen; then put the pen away ; take mouse and position cursor at desired place, press middle mouse button/wheel to paste; put mouse away and then take pen again to continue working..So I'm was looking for something like an INQ-query (which unfortunately doesn't exist) that I could put into a macro and trigger from the tablet or keyboard.Is it somehow possible to write the clipboard content to a file that can be accessed with OPEN_INFILE ? I am currently doing this in a macro:PASTE_FROM_CLIPBOARD NOSUBPART Specifying a point where there is nothing else.What is then found
Hi,I'm starting to use the welding module.I have a problem:I created three fillet welds, I try to combine them but I can only combine two, selecting the third one this message appears: "The groove/butt weld must be positioned higher in the Model Tree than the fillet weld."Has this happened to you too?Have you solved it?Thank you.P.S. I'm using Creo 9.0.2.0
I have a project stored in my Model Manager installation (models and drawings). I have to send my project to my customer that is also using Creo Direct/Modeling but without Model Manager. Is there a quick way to export model and drawings in a single zip file? The task is easy for the 3d-model, but I don't find the way to automatically collect all drawings related to this design.
I am using Creo Parametric Release 9.0 and Datecode9.0.2.0I am using AFX and i know there is an auto number and auto generating name for parts and assembly. Is there a way to have the Item number generator different for each profile type? I'd like to have in my assembly a naming scheme for parts like this:PROJECTNAME_I_BEAM_01;PROJECTNAME_I_BEAM_02;PROJECTNAME_I_BEAM_03;PROJECTNAME_U_BEAM_01;PROJECTNAME_PIPE_01.Instead of actual naming scheme:PROJECTNAME_I_BEAM_01;PROJECTNAME_I_BEAM_02;PROJECTNAME_I_BEAM_03;PROJECTNAME_U_BEAM_04;PROJECTNAME_PIPE_05.
Dear friends, I want to dimension drawing view , for these I need faces and edges from edges , please help me to get all edges and faces from solid body
I would like to have a part that contains multiple simplified reps produce separate drawings for each rep and allow the titleblock parameter [&TITLE] to use the rep name rather than the part name. Currently I have produced the drawings but they contain the same information in the title block.
Hi everyone, I am wanting to create a family table that allows the user to pick from a list some options for features. Like, do you want 3 grooves on the face or only 2 grooves. Our parts are just optional features that sometimes vary in size. I was looking at nested family tables but it doesn't seem like I can select an instance from the subfamily table in the main family table. Our parts are very simple and of the 10 features there are only 2-5 different variations which is why I am not worried about using a family table. Ideally I would like this to easily translate into a drawing so I am not having to put a lot of dimensions for each new drawing. I need one drawing per instance. Thank you in advance for the help!
I am using Creo Parametric Release 6.0 and Datecode6.0.0.0There is no permission to use [Copy Geometry], the command button is gray and cannot be used. I hope you can help to confirm whether our current license includes this function command. -------------------------------------------------Translated the text from Simplified Chinese to English using google translate on 19-April-2023 at 11:46am IST. Translated by vnamboodheri. Subject: 没有权限用【复制几何】,希望您帮忙确认下当前我们的许可是否包含此功Body: 没有权限用【复制几何】,命令按钮是灰色的,无法使用,希望您帮忙确认下当前我们的许可是否包含此功能命令。-------------------------------------------------
I used the family table patternize instance feature to make several shafts that change with their length. I am making a drawing and I want to pull in and show the incremental value that the patternize feature used. Is there a symbolic name (like &dxxx) for this particular dimension? I've looked several places and can't seem to find anything.
Hi Created cylinder in creo by using extrude, I need to use this surface in optical analysis, But when i click surface, just half of them selecting, for the other one we need to select with CTRL, But this is no good my optical simulation, Simulation software requires me just 1 clicking , How can built this part as a on single surface,
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.