Recently active
The service pubs users here dislike the UI change done between Creo Illustrate 2 and 3. In particular you're driving more towards the future i.e. Animations of each procedure whereas we're still somewhat still in the past (make images to stick in wordy docs). Any way to give us an option to tweak the way it looks
One of the major changes to Creo View 3 is that PTC has added a line of code which limits the size of a file that can be viewed to 8MB. Why? Is it to help the graphics card? No. Is it to add any functionality at all? No. It's so PTC can charge companies an additional $25,000 per seat for the Massive Assemblies Extension, which is a line of code that set the newly introduced limit to "no limit". That's all it does; nothing else. PTC, stop this extortion.
It would be nice if we could right click and have a selection to open drawing (this could work because Windchill knows the reference drawing). Most of the time we do not know the part number that we need, but do know the assembly to look in (start from the top assembly and drill down) Current workflow: Find top assy in Windchill and open in Creo View Locate part / sub-assembly in model tree or view pane, right click and select Windchill EPM Doc details Back in Windchill select Related Objects tab In the references table select the Drawing Reference Click window on details tab to open in Creo View Thanks for the consideration
Creo View is missing the copy and paste feature that once existed in Product View 9.0. Customer would like to be able to still use Copy and Paste feature Product View once had. Would like to get Copy functionality added to Creo View.
The intent of this Product Idea submission is to propose an Enchancement for the CreoView Visualization product and it is linked to the PTC Case #11853473 . To Provide more details in regarding to this request: The Current Object Adapter for UGNX does not support the conversion of 3D Points. as shown on picture below the "Datum Point" options in the recipe editor for the NX Adapter is greyed out and cannot be selected. Our request is to enable for the NX Adapter the publishing of all Datum entities, primarily Datum Points. please notice that Datum Points are currently supported by the CATIA V5 Adapter for CreoView provided by Theorem and we think that the support of such basic 3D entities should be enabled also for UGNX. Looking forward to get your feedback. Thanks
This is an idea for Creo View 3.0 M010 (formally ProductVIEW). Not Pro/E, or Creo/Elements or Creo. Please make it easier to flip the cross section in Creo View. Currently it's far to buried and is used 50% of the time. Some methods to achieve this: A button on the Sectioning tab "Flip Section" Click on arrow in graphics area to flip (I watch people and this is the first thing they do, is click on the arrow)
The intent of this Product Idea submission is to propose an Enchancement for the CreoView Visualization product and it is linked to the PTC Case #11810399. To provide more details in regarding to this request: we would like to see implemented in CreoView a new feature which would allow the creation of a Construction Point using an Offset from the Global CSYS Reference (X0, Y0, Z0). this is something which is not possible at this point of time; The option offset in the Contruction point creation Panel is always Grayed out unless an already existing CSYS is selected. Picture Below shows the Current (CV 3.0) Construction Point Panel; the offset fieds are greyed out unless an existing csys is selected . Our request would be to enable within this panel the option to select the Global CSYS (X0, Y0, Z0) so that it would be possible to add point at an arbitraty X,Y,Z Location. Please note: as stated in the PTC Case already mentioned, our end users reported t
If Creo Sketch supports install on Apple IPAD/Mac, it will be a great choice for us.
We would like to use Creo View to view 3D drawings/annotations. It is necessary to have easy access to toggle on/off these annotation from the Main UI. In an .asm file the number of annotation can be very high since all lower level models annotations also show. There show be a shortcut button in the Main UI or the ability to "Customize" the ribbon to include these options.
Add a recipe option within the Creo View MCAD Adapter to only include entities within the drawing borders of 2D Creo Elements/Pro & Creo Parametric drawings in output visualization files. It currently includes all entities, inside and outside of the drawing borders.
Hello! We'd like to have a native support for the epub-publication-type in the CreoView-plugin, which is used by Windchill Service Information Manager. We played a little bit around with the technical preview of ePub-generation. The ePub is rendered properly. However, I need to download the epub-representation and open this then in an ebook-viewer, such as calibre. A native preview-support of the epub-format would be very appreciated, so that the user can open the epub directly (as a PDF) from the Windchill interface. Thank you for your support, your Windchill Team @ DATACOPY
Surface model (e.g. shrinkwrap) color assignment in Creo Illustrate is missing This functionality should be available in future release of Creo Illustrate. Case: 11547401 SPR: 2178420 See also Product idea: "creo default surface color choice"
It would be advantageous if the information that the Creo Parametric users enter to make their higher level Combination Reps (including explode states) was propagatable to the Creo Illustrate file (for a first setup at least). Many times the tech pubs people want to use the exact same view as the engineering drawing but with the nicer rendering capabilities of Creo Illustrate.
We have to batch convert many CreoView/ProductView assemblies (PVZ/EDZ) in other formats (JT, WRL...) so we have first to convert in Creo Parametric format (ASM, PRT), but during this step, informations about layers are lost. We would like to exclude layers according to a list (using config.pro, existing node <LAYERS> of configuration file (.DXC), or existing node <LAYER_SETUP_FILE> in TTD file (.TTD) ). Thanks for help.
I just want to be able to edit the cross hatches in my 3D cross sections. 2D cross hatches work fine, but 3D cross hatches are treated completely differently. ProE assigns random angles and spacing to my corss hatches and if I want to change them, I cannot. Sometimes they're close enough that I can live with whatever it felt like creating today, but recently, it created a cross hatch that is so close it appears solid and it is un-editable. The I-DEAS cross section tool can be infinitely frustrating, but at least it can be edited! If there is already a function buried in the code somewhere, bring it forward and make it more intuitive to find. ...or make the cross hatch selectable with an edit menu that appears when you right click? Thanks,Dave Gulbernat
We have a requirement to select parts, that were published from Windchill into our MES system, when the parts are selected, we need CreoView to load the assembly and select the parts that were selected in our MES system. The CreoView toolkit works great for highlighting parts but currently there is no way to load visualization files from the Windchill server.
In ProductView 9.1 M060 prints were crisp clean and vector based. In Creo View 2.0 M030 prints are "images", non-vector based print results. In a enviroment where soft-copies are an important commodity, a vector file is much more usable. Images in soft copies are pretty much useless. I recommend that Cro View be returned to a vector-based printing driver.
Currently, Creo View cannot create Stand Alone files (*.exe). If that capability were added, it would possible to open a assambly, part or drawing without installing Creo View. Please add the ability to generate *.exe files from Creo View.
Currently, the panes cannot be resized in the multiple pane view in Creo View. Please allow the panes in Creo View to be resized.
The Creo View client for Linux does not include the realdwg libraries. This appears to be the only piece of Creo View that doesn't work on LInux.
There is already Creo View for Linux. Windchill should now see Linux as a supported platform when trying to open viewables - especially if there is a working Creo View install already there.
This is a request to be able to publish cosmetic features and sketches created in Creo Parametric over to CreoView. Currently, they are not.
When CreoView 2 opens a file, there is no way to specify what view to open. It uses some generic view that doesn't fit our needs. We need to be able to have the ability to tell CreoView 2 to open a specific view if it exists.
In Creo 2, arrowheads from an annotation (e.g., a dimension) can be shown filled in. When that view is published and opened in CreoView 2, the arrowheads are not filled in. It would be nice to be able to publish Creo entities as what-you-see-is-what-you-get to CreoView 2.
atm its not possible to start creoview with the shaded with edges view. Even if i change the option to shaded with edges this cant be done. Many of my customers asked me if its possible that shaded with edges is the default view. Thanx. Regards Christian
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.